Washing machine

BRANSON EVD 40

Condition: used, TECHNICAL DETAILS Hsdpeug U Skofx Agtsfl - Media : A3 type - Installed power : 8 [kW] - Media volume : 80 liters - Basket dimensions : 300 x 200 x 150 [mm] - Cooling : water - Tank 1 : washing with serial filtration - Tank 2 : rinsing with serial filtration - 1 washing tank : 300 x 200 x 150 [mm] - Continuous distillation : 25 [l/hour] - Size (W x L x H) :1200 x 1800 x 1500 [mm] EQUIPMENT - Loading system : manual - Ultrasounds : yes - Vapour degreasing : yes - Vacuum drying : yes - Cooling unit HITEMA ECA.008

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug) Hodpfefbt Sijx Agtjfl

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. Hedpjv Sa I Tefx Agtjfl In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: ready for operation (used), Year of construction: 2020, A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible. Hfodpsx Uq Uusfx Agtol

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) Hedporbz T Nsfx Agtefl - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, Honing: R 220 euro R 220 EC R 420 EC Hsdpfxswfdbce Agtsfl R 620 R 360 So DL R185 EC-KF Rcc4 Set Blasting: RSKI 1000 RSKI700-3d-atex RT 250 euro AM: C1 M1 M1 Basic S1 In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyor belts, and small machines) available in stock. The machines can be purchased or rented. Contact us for (free) advice on honing, tumbling, and blasting technology.

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Hjdju T Rg Rjpfx Agtefl

Condition: not inspected (used), Hydromat HW25-714 Hfjdpfx Aoi Ewtuogtsl Manufacturer: Pfiffner Serial number: 5.07.021-1 (4.2m) Total units produced to date: approximately 7,800,000 Footprint: 9m x 4m + control cabinet

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg Hedpfx Ajfv Av Sjgtofl dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, Year of construction: 2026, Machine type: EVP 30 Manufacturer: ERBA Hfedpfx Agoyq Ripetel Power kW: 0.95 Total volume: 30 liters Description: The EVP 30 vibratory finishing machine from ERBA is ideal for processing small workpieces or as an entry-level or pilot system. It features a flat work container base without a separation unit. Discharge or separation is carried out via the bottom discharge (manual or pneumatic). The motor speed can be continuously adjusted using a frequency converter (optional). The system can also be equipped with a fully automated PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and longevity, which is also ensured by the heat-cast polyurethane lining of the work bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We are happy to provide you with independent and non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place by means of telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which also includes our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase/contract is concluded.