Turntable lining

Bison Durchmesser 200 mm

Condition: used, Three-jaw chuck Three-jaw lathe chuck -Chuck size: Ø 200 mm -without interchangeable jaws Psdpfxjb A I Srs Adnjgw -Weight: 16 kg

Condition: used, Year of construction: 1998, pressure 175 t chamfer lenght 4050 mm distance between columns 3050 mm throat 300 mm stroke 240 mm stroke speed - idle stroke downwards max. 140 mm/sec working feed max. 9 mm/sec stroke speed -return max. 130 mm/sec distance between table / ram min. 370 - max. 610 mm control CYBELEC DNC 880S total power requirement 15 kW Pgedpetv Rh Ajfx Adnsw weight of the machine ca. 15 t dimensions of the machine ca. 5,89 x 3,6 x 3,16 m Features: - Controlled axes: Y1, Y2, X, R - CNC crowning - CYBELEC DNC 880S control - Swivel control, front right - 4x manually adjustable stop fingers - Foot switch - 1 set of upper tools - 1 set of lower tools - 2x material support arms at the front - Side + rear protective device - Operating instructions

Condition: used, Three-jaw chuck, 3-jaw chuck Psdpfx Aded Inw Nsnogw -Type: OM200-ZJ -Chuck size: O 200 mm -Passage: O 56 mm -Admission thread: M60 x 5.5 mm -Weight: 19.8 kg

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 200 mm -Passage: Ø 54 mm Pgjdpfxod Inwyj Adnjw -Rezess: Ø 159 mm -Hole circle: 176 mm -Weight: 14.2 kg

Condition: used, Suspension crane runway Crane system DEMAG type KBK 1 Year of construction approx. 2000 Monorail overhead crane system with monorail crane bridge Light crane system made of KBK modular system sections load capacity: 125 kg Span width: 5 meters Distance between longitudinal rails: 4.1 meters Longitudinal girder length complete: 12 metres Beam profile crossbeam = KBK1 Beam profile longitudinal rails = KBK1 Consisting of: 29 meters KBK-1 system profile (4x 6000 mm + 1x 5000 mm) 1 piece of trolleys for the crane suspension 2 pieces double carriage for the longitudinal rails 10 pieces screw claws for the crane suspension or ceiling attachment (without beam clamps) 6 pcs. end covers suitable for KBK1 runners Pgodpfxshrkrtj Adnsw

Condition: used, Year of construction: 2005, x-travel 500 mm y-travel 450 mm z-travel 400 mm control Heidenhain iTNC 530 c-axis 360 b-axis -5/+110 ° turning speeds 20- 10000 U/min power capacity - milling spindle 13 kW tool taper SK 40 no. of workpieces in the magazine 16 Stück rapid traverse 24 m/min table surface area 630 x 500 mm table load 200 kg weight of the machine ca. 4,0 t Pgodpjw Eyg Iofx Adnjw dimensions 2,3x 3,2 x 2,75 m 3 + 2 axis Milling Center - Turn-/swiveling table full programmable - electr. hand wheel - new spindel in 2015

Condition: excellent (used), Year of construction: 2018, Control: HEIDENHAIN iTNC530 Power-on hours: 11,204 h Spindle hours: 2,182 h Technical details: Travel (X/Y/Z): 600 / 560 / 510 mm Spindle: Max. speed: 12,000 rpm Drive power - main spindle: 13 / 9 kW Max. torque: 82 / 54 Nm Distance spindle nose to table: 120 - 630 mm Worktable: Table clamping surface: 900 x 560 mm Max. table load: 600 kg T-slots: 5 Working height: 850 mm Tool magazine: Number of tool positions: 30 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Tool-to-tool change time: 2.4 sec Chip-to-chip time: 6.7 sec Feeds: Psdpfx Aswm I Ebjdnjgw Rapid traverse: 30 m/min Feed force: 5 kN Max. feed rate: 30,000 mm/min Total power requirement: 32 kVA Machine weight: approx. 5.0 t Space requirement: approx. 4.0 x 5.0 x 3.0 m The machine can be demonstrated under working conditions. Low operating hours! Price includes loading.

Condition: used, Year of construction: 2011, travel -x axis 570 / 500 (1.070) mm travel -y axis 650 mm travel -z axis 530 mm control HEIDENHAIN iTNC 530 number of spindle speeds 12.000 U/min tool taper SK40 5-axis machining center | HEDELIUS - RS605 K IC equipped with tool changer, ITC (50bar), zero-point clamping system and chip conveyor. The machine only has 7.863h spindle hours. An extensive tool package is included. The machine is in a well-maintained condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Pedpfx Aowlvraednjgw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: RS605 K IC 40 | RS-605 | RS 605

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. Pgedpfxst Ipi Ie Adnsw The machine is in good condition and can be demonstrated under power.

Year of construction: 1992, condition: like new (used), machine/vehicle number: Div1, Technical data: 1x Demag KBK 1 pillar slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125to payload Height: about 3.5m UK outrigger: approx. 3m Outreach: approx. 4m Hook height: approx. 2.55m Weight complete approx. 450 kg Pgjdpsng H T Uofx Adnjw with steel or Demag chain hoist 125 kg depending on stock incl. bolts, drag cable, chassis, end cap etc. Various cranes are available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment