Edge banding machine Stream MDS

BIESSE STREAM MDS

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Casdpfxjt Hagns Ab Tsa Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: excellent (used), Year of construction: 2018, operating hours: 1,020 h, functionality: fully functional, For sale: Nesting machine from Holzher with very few operating hours and top equipment! Manufacturer: Holz-Her Model: Nextec 7707 Year of manufacture: 2018 Weight: 4980 kg Operating hours: 1020 Processing length X: 3100 mm Processing length Y: 2200 mm Vector speed: 110 m/min Equipment: Milling unit: 12 kW, air-cooled, 1000–24000 rpm Drilling unit (XL drilling head): 24 spindles (18 vertical, 6 horizontal) including saw unit in X-direction (grooving in X-direction) Angle gear: e.g. Lamello P-System Workpiece support: High-Flow nesting table with continuous vacuum area, 16-zone vacuum controlled by software Safety device: light barrier Workpiece clamping: 2 × 140 m³/h vacuum pumps, low-maintenance dry-running, additional 250 m³/h dry-running vacuum pump Tool changer: 10-position pick-up changer integrated in the machine frame, 1-position X/Y pick-up changer with tool cover NEXTEC module: CabinetSelect DirectCut: line laser in X/Y-direction, incl. software Casdpfx Aewtiq Seb Tsa Software: CAMPUS software machine license included, aCADemy CAD/CAM module and CabinetControl Base, “Warehouse” software module, Production software module, BetterNest free-form nesting

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Cjdpfx Aov Szt Dsb Toaa Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Morbidelli X 400 cnc machine with flat (nesting) table Caodpfxjxqzm Do Ab Tja

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim Caodpfx Abjw I H Rkj Tsa

Condition: used, BRANDT highflex 1440 edge bander Codpov H D S Sefx Ab Toaa well equipped, Initial milling cutters glue application pneumatic preliminary guillotine pressure rollers finished cutting saws top-bottom milling unit 2 x finishing unit profile scraper flat scraper polisher the machine has nc milling cutter control and a pneumatic package max. element height 60mm max. veneer thickness in a roll 3mm max. feed 14m/min the machine is functional, can be tested before purchase

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, HEGLA, KPL-MZ-III, 36 Compact Storage System for Glass Year of construction: 2014. Load capacity: 180 T Max. glass sizes: 3210 x 6000 mm, 36 compartments. Csdpfxjv Iqtxs Ab Teaa In very good technical condition. Inspection is possible by appointment. Available: NOW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Caodpfx Ajxwurysb Tja Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: new, Year of construction: 2020, operating hours: 1 h, SWISS KRONO Kft. offers the CNC drilling and milling machine MW2131KS Masterwood. As an attachment we are attaching the description of the machines as well as further pictures and information in a shared folder. SWISS KRONO Kft. bietet die CNC-Bohr- und Fräsmaschine MW2131KS von Masterwood an. Casdsrxubwjpfx Ab Tea Als Anhang fügen wir die Beschreibung der Maschinen sowie weitere Bilder bei und Informationen in einem freigegebenen Ordner.

Condition: excellent (used), Year of construction: 2018, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Cedjwlbxlepfx Ab Teaa Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading