CNC machining center Biesse Rover A1432 (2016)

Biesse Rover A1432

Condition: used, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Ndsdsx Hwhxopfx Ab Asc - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. Njdpfx Aoy Ehrxjb Ajdc — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Njdpsw A Ruqsfx Ab Aodc Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Nsdpotyyvwjfx Ab Aedc Weight net 4,800 kgs

Condition: used, machine/vehicle number: 008355, X axis working area: 3600 mm Y axis working area: 2120 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Ndedpfxeygr Urj Ab Aoc Total number of tool changer positions: 16

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm Ndedpjmydmbofx Ab Asc -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: new, Year of construction: 2027, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. Ndjdpfjvv H Hdox Ab Aec ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: good (used), Year of construction: 1997, 3-AXIS MACHINE FOR DRILLING AND MILLING OF CABINET FURNITURE PARTS, WITH AUTOMATIC TOOL CHANGER FOR MILLING TOOLS Working area: 2,893 x 950 mm Maximum workpiece height: 65 mm Number of workpiece supports: 6 Number of vacuum cups per support: 2 1 milling motor, 6.8 kW Clearance height between tool holder surface (motor) and top edge of vacuum cup: approx. 250 mm Nedpoy Iaihefx Ab Asdc 2 tool changers: 3-position traveling and 4-position lateral Grooving saw fixed in X axis Number of vertical drilling spindles: 10 Number of horizontal drilling spindles: X 2 + 2, Y 1+1 Vacuum pump 100 cbm/h Controller: NC 410 Safety tread mat in front of the machine

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 5-Axis Machining Center Biesse C9.50 - Beam table – Material can be clamped with suction cups or hold-down clamps Dual tool magazine configuration – highly flexible for production Top magazine – Revolver type Ndjdsyl Uuxjpfx Ab Aec Bottom magazine – Chain carousel (additional saw blade for HSK mounting – spindle) 8 beam tables, supports 16 kW spindle Very large aggregate/saw unit Becker pump Year of manufacture: 2009

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Njdjzuwyzopfx Ab Ajdc Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation