Panel turner

Bargstedt PROFI TD 31/30/12

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Iodpfx Ahsfi Tg Ho Njal Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Year of construction: 2022, condition: new, Two shaft Pre-shredder Cutting area: 2420x2000mm Special Cutting table, "Butterfly knives" developed by Metso First choice for: Bagopening WITHOUT shredding the contents too much. The perfect Iasdpfx Asfktqpsh Nel bag opener for light packing material.

Condition: excellent (used), the plant is consisting of: - 2 chain separators - 2 55 cbm³ silos with discharge screws - 2 discharge screws - 4 mixing and homogenising chambers, - 5 conveyor belts - 2 double-shaft extruders connected in parallel - 1 double shaft mixers Iaedpjlxzl Eofx Ah Nol - container for liquid extracts, etc.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader Ijdpfxed Rg Dps Ah Neal N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: Iasdpfetutwvox Ah Njl -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Year of construction: 1994, condition: good (used), “Hein Lehmann Liwell Flip-Flow Vibrating Screen LF 3,0 – 8,82 / 28 ED” for Sale Manufacturer: Hein Lehmann Liwell Type: LF 3,0 – 8,82 / 28 ED Size: 3.000mm x 8.820mm Decks: 1 Year of Manufacture: 1994 Part of frame and conveyor included. Vibrating Screen will be overhauled, sandblasted and painted in color as requested. Iajdeglvxhopfx Ah Njl

Condition: used, Automatic double cell unloader without pit for use in a squaring and edge banding line Motorized panel introduction transfer Double automatic panel unloading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Iaedpfx Aherzhftj Nsl Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Martyr panel management system Programming and control system

Year of construction: 2016, condition: ready for operation (used), 1. Unit pump system based on pump „TAPFLO” SRT 200-OOPQ-GBB-TC-A - ( IMG_1502,1501,1505,1510,1511) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 45KW electric motor, Inverter ABB) - electric heating pump system up to 120 deg. C` (Surface heating of the pomp head) - efficiency abt 200 t /h - assembly year 2016 - working abt 1000hrs 2. Unit pump system based on pump „„VIKING” type N34 (IMG 1493,1496,1501) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 35KW electric motor, Inverter ) - oil heating pump system up to 150 deg. C` - efficiency abt 150 t /h - assembly year 2016 - working abt 1000hrs 3. Pumps „TAPFLO” SRT 200-OOPQ-GBB-TC-A (2 pcs) year of production 2014 - spare pumps for unit no 1 4. Unit pump system based on pump „„VIKING” type N34 ( pump in good working condition ,but in order to increase efficency elements inside pump to be reconitioned) - mounted on foundation slab in accordance with standard DN 24259, enclosed with a roof - pomp unit contains (speed reducer, 35KW electric motor, Inverter ) - Electric heating pump system up to 120 deg. C` - efficiency abt 70 t /h - assembly year 2013 5. Container boiler - quick steam generator Loos DF 400 embedded in conteiner 20’ included fuel tank inside conteiner (IMG 1522,1523,1524,1527,1529,) for heating of small circulation heating system in railtanks and simultanously heating disch walves of railtanks - low generator and burners mileage - new (not used) water treatment station 6. Collector pipe 60 m long DN 250 insulated with mineral wool, covered with steel plates (5 pcs 12 meters each one) - 6 inputs DN100 (connetions to railwagons), ended by valves DN 100 - 3 outputs to pumps DN150 ended by valves DN 150 7. Set of 6 flexible hoses DN 100 made of stainless steel to connect collector pipe with railway tanks 8. Flexibe hoses DN150 to connect collector with pumps - 2 pcs/ 1m long - 3 pcs/5m long Attached pls find loading scheme of our portable station (IMG 1725) A – flexible hose B – Unit pump system C – Steam Generator D – railway tanks (6 pcs) Pictures will follow in separate mail We wld like to sell all elements of our bitumen portable pumping station in one package . Estimated value of described complete mobile loading station as pckg on level of abt EUR 100.000,-. but we are flexible to final price. We wld like to point out that this heavy duty equipment offered by us has been tailor made for our needs in cooperation with our Scandinavian partners, Iedpfxef Sad Ue Ah Noal where many years of their knowledge and experience has been used .Equipment is reliable in difficult working conditions , very efficient and at the same time very simple to use. It took us some time to complete the entire portable pumping station. Described equipment is very low used and ready for operations at any time

Condition: new, Year of construction: 2022, New machine, year of manufacture 2022 Suitable for large cutting lengths, e.g., in kitchen construction or for floorboards Compact footprint and highly versatile applications Quick conversion between double mitre cuts and cross-cutting Robust cast iron pivoting arm with replaceable hexagonal guides Movable saw unit with return spring, eightfold bearing for precise cuts Saw unit swivels 45 degrees to both sides Ijdpfxsw I Uq Se Ah Noal Motor equipped with mechanical brake Aluminium stop as standard Roller conveyors, one meter long each, available as optional accessories for both sides Technical Data Dimensions and Weight: Length approx. 2110 mm Width/Depth approx. 1580 mm Height approx. 1500 mm Weight (net) approx. 300 kg Extraction port connection: Saw blade guard extraction port Ø 60 mm Electrical Data: Rated voltage 400 V, frequency 50 Hz Motor drive power 4 kW Sliding Table and Work Table: Table length 2060 mm Table width 1320 mm Noise Emission: Sound pressure level 84 dB(A) Sound power level 100 dB(A) Circular Saw Unit: Saw blade tilt -45° to 45° Pivot angle of saw arm -45° to 45° Max. cutting height 45°: 570 x 120 mm Max. cutting height -45°: 470 x 120 mm Max. cross section: 900 x 20 / 855 x 80 mm Max. cutting height 0°/45°: 120 / 83 mm Saw blade diameter: 400 mm Saw blade bore diameter: 30 mm Saw blade speed: 2800 rpm Location: Solingen Availability: Upon agreement

Condition: used, Panel turning device used for loading and unloading panels. Iajdperzhfajfx Ah Nol Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transservsal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!