Screw compressor

ATLAS COPCO GA18VSDFF

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA18VSDFF screw compressor, machine with inverter and air dryer, after service Technical data: capacity: 3.62 m3/min; motor power: 18.5 kW; maximum pressure: 12.75 bar; year: 2013; operating hours: 8369 h 25900 net 31857 gross The compressor is fully functional, ready for operation, with warranty Service provided. Video link below. Pgjdpoyt Hwhjfx Ahyjk

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders Psdpfx Ajx D H Hcehyegk • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • 16 vertical and 4 horizontal boring spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • additional refurbished 5-axe main spindel available • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: excellent (used), Year of construction: 2004, ATLAS COPCO GA18VSDFF screw compressor, machine with frequency inverter and air dryer, after service. Technical specifications: Capacity: 3.35 m3/min; Motor power: 18.5 kW; Max. pressure: 12.80 bar; Year: 2004; Operating hours: 12,831 h; Pjdpfxoyfpbgj Ahyegk Price: 17,500 net / 21,525 gross The compressor is fully operational, ready for work, with warranty. Service provided. Link to video below.

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software Pedpshabk Dofx Ahysgk -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 4s FORMAT4 Profit H200 13.33 was manufactured in 2019. It features a CNC portal machining center with a working area of 4000 mm in the X-axis and 1670 mm in the Y-axis. The machine is equipped with an electrospindle power of 12 kW and a tool magazine with 12 positions. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 Profit H200 13.33 machine we have for sale. Contact us for further details. • Working field (max panel size) • X: 3300 mm • Y: 1280 mm • Z clearance: 250 mm • Spindle • Tool interface: HSK F63 • Rated power at: approx. 12,000 rpm • Cooling: Air-cooled Pedpfx Ajyi U Elohyogk • Rotation: CW / CCW • Tool magazine • Linear tool magazine (side-mounted): 12 positions • Additional linear magazine on gantry: 4 positions • Max. tool diameter: 250 mm • Max. tool length: 300 mm • Drilling unit • Model: DH 24 6H 2S • Vertical spindles: 18 (12 in X, 6 in Y) • Horizontal spindles: 6 (4 in X, 2 in Y) • Max. drill length: 70 mm • Max. tool diameter: 10 mm • Grooving saws: 2 (X and Y) • Max. saw diameter: 120 mm • Max. speed: 6,000 rpm • Vacuum table • 6 consoles (instead of 4) • Dual-circuit vacuum system • Vacuum cups height: 100 mm • Pneumatic console locking • Adjustable side stops (Y-axis) • Axis system • X-axis: Rack and pinion drive • Y/Z-axis: Ball screw drive • Linear guideways on all axes • Central automatic lubrication • Control and software • CNC control with CAD/CAM software • 3D simulation preview • DXF import capability • Parametric programming • Remote service package (internet-ready)

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Pgsdpfxju Rptys Ahysk Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: good (used), Year of construction: 2021, We offer you: Screw Compressor Manufacturer: BOGE Pedpjw Ra Emofx Ahyegk Type: C 12-2 LF Year of manufacture: 2021 Technical data: - Maximum pressure: 10 bar - Volume flow: 0.52 - 1.76 m3/min - Motor power: 11 kW - Motor speed: 2381 rpm - Dimensions (W x D x H): 1610 x 915 x 1380 mm - Weight: 557 kg Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical specifications and details are subject to change and error. Prior sale reserved!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Travel Paths: • X-axis: 6170 mm • Y-axis: 1395 mm • Z-axis: 180 mm Machine Structure: • Gantry design with moving machining unit • 10 consoles (ATS) with adjustable vacuum pods • 30 movable support elements • Multi-zone vacuum system (4 working areas along the X-axis) Installation Dimensions: • Machine length: approx. 8850 mm • Machine width: approx. 4020 mm • Working length: approx. 7300 mm Clamping and Vacuum System: • 2 vacuum pumps each with 90 m³/h capacity • Vacuum modules in various sizes (360° rotatable) • Pneumatic clamping systems: • Front stops • Side stops (left/right) • Central stops • Uniclamp clamping units for workpiece thicknesses 40–98 mm • Sensors for recognising lowered stops Machining Units Main Spindle: • Power: 7.5 kW to 12 kW • Speed: up to 24,000 rpm • Tool holder: HSK F63 Drilling Head: • Vertical spindles: • 10 along X-axis • 10 along Y-axis • Horizontal spindles: • 6 along X • 2 along Y Additional Parameters: • Max. drilling diameter: 35 mm • Usable length: 45 mm • Max. projection: 60 mm Tool Change System Turret Tool Changer: • Capacity: 18 tools • Holder: ISO30 / HSK F63 • Max. tool diameter: 200 mm • Max. tool length: 160 mm Additional: • Pick-up changer with 2 positions • Provision for aggregates (e.g., saw units up to Ø 270 mm) Electrical: • Connection: 400 V / 50 Hz / 3 phase • Power: 22 kW Compressed Air: • Connection: 3/8" • Working pressure: 6 bar • Consumption: approx. 400 NL/min Pgjdpfxsyvz Emo Ahyok Extraction: • Connection diameter: 250 mm • Air flow requirement: 5300 m³/h • Air velocity: 30 m/s • Pressure loss: 1500 Pa Mechanical Data • Machine weight: approx. 4750 kg Additional Equipment • Automatic central lubrication • Chip conveyor • Air blast device for spindle • Pneumatic pre-installation system • Safety equipment according to Directive 98/37/EC • CNC control (Biesse system)

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,100 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 320 mm, number of axes: 3, spindle motor power: 12,000 W, This 3s HOLZHER dynestic 7507 was manufactured in 2017. It features an X-Axis stroke of 3100 mm or 4100 mm, a Y-Axis stroke of 1560 mm, and a Z-Axis stroke of 320 mm. The machine offers a vector speed of 110 m/min and a main spindle power ranging from 6 kW to 12 kW. If you are looking to get high-quality CNC wood machining capabilities, consider the HOLZHER dynestic 7507 machine we have for sale. Contact us for further details. Pgsdpfxjyi D Enj Ahyok • Machining height: up to 80 mm from top of suction cups • Vector speed: 110 m/min • Main spindle: 6–12 kW (air or liquid cooled) • Drilling head: 14–24 spindles (depending on configuration) • Tool changer: 6, 12, or 18 stations Additional equipment • Vacuum pump(s): 250 m³/h per pump (up to 500 m³/h total)

Year of construction: 2026, condition: new, DESCRIPTION Horizontal drum chipper, engineered and built for maximum performance and reliability. This heavy-duty, robust machine is suited for the most demanding conditions and is ideal for processing all types of waste wood materials. The Varli VDC-1600 drum chipper features a large infeed opening, making it highly capable of processing waste wood material, logs, and wood bundles (diameters over 700 mm can be easily accommodated). The VDC-1600 can achieve outputs of approximately 100,000 kg per hour of high-quality pulp mill chips or finer fractions suitable for biofuel production. The chipper can also deliver coarser fractions, producing chips up to 200 mm in length (depending on configuration). Built with a heavy-duty frame, the chipper features over-sized, self-aligning bearings housed in steel casings, firmly secured to the chipper’s side structure for long service life and reliable operation. Equipped with 14 feed rollers fitted with special, wear-resistant, surface-hardened teeth, the VDC-1600 provides secure feed and optimised material throughput. The chipper comes standard with drum-mounted cutting tools made from Hardox, along with replaceable wear plates. OPERATING PRINCIPLE The VDC-series is designed to produce wood chips from logs or bark bundles. Pedoyi H Ryspfx Ahyjgk Material is horizontally fed by vibrating chute into free-floating feed rollers, which automatically adjust to the material’s height. The feed rollers securely grip and transport the material into a high-speed rotating drum armed with solid knives, fixed with centrifugal wedges—fostering durability, preventing knife damage, and minimizing downtime during tool changes. The rotor knives are easily accessible and can be re-sharpened multiple times. Key features include an adjustable stator knife, hydraulic hood, and hydraulic device for stator knife exchange. BENEFITS - Extremely robust construction and heavy-duty design for stable operation - Centrifugal wedge knife mounting for reduced machine downtime - Adjustable stator knife to extend operating life - Hydraulic hood for swift and easy maintenance TECHNICAL DATA Model: VDC-1600 Infeed Width: 1250 mm Rotor Diameter: 1600 mm Number of Infeed Rollers: 14 Number of Cutting Tools (Knives): 4 Drive Motor(s): 2 x 400 kW Electrical Supply: 400V, 3Phase, 50Hz Fraction Output: 60 mm (SPF), approx. 100,000 kg/h Total Weight: 96,000 kg