Screw compressor

Atlas Copco GA18VSDFF

Condition: excellent (used), Year of construction: 2004, ATLAS COPCO GA18VSDFF screw compressor, machine with frequency inverter and air dryer, after service. Technical specifications: Capacity: 3.35 m3/min; Motor power: 18.5 kW; Max. pressure: 12.80 bar; Gjdpeyfpbgsfx Abmsuc Year: 2004; Operating hours: 12,831 h; Price: 17,500 net / 21,525 gross The compressor is fully operational, ready for work, with warranty. Service provided. Link to video below.

Year of construction: 2020, condition: as good as new (ex-display), 1x drive unit with trolley 1x travelling unit with trolley and height adjustment -Centric roller block adjustment with hand crank. -Manual height adjustment, locking with socket pin - height difference 0-350 mm adjustable - Load capacity: 2.500 kg / unit - Component diameter: 200mm - 2.000mm - Rollers: PUR wheels - dim. length/width: approx. 1.900mm x 460mm - Chassis track width: 1435mm - turning speed: 0 - 2,000 mm/min Gsdpfx Ajfxgrdjbmeuc - Operation: hand remote control and foot switch

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated Gsdpshabk Djfx Abmeuc -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Gusdpfsu Rptyjx Abmjc Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: new, table diameter 780 mm Guedpfx Absfv Ay Ssmjc table load 1,0 t swivelling range 0 - 135 Grad turning speeds 0,15 - 1,5 U/min table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1000 Nm welding current 500 Ampere including remote control and welding current transmission.

Condition: excellent (used), Year of construction: 2015, operating hours: 77,212 h, For sale is a mass finishing machine from the manufacturer Rösler, type R 620 Euro including centrifuge. The machine is in very good condition and can be inspected on site. Gjdpfxstqlqie Abmouc

Condition: used, Type Amb 6/4 VAI-Z In our assessment, the machine is in good used condition and can be inspected under power by appointment. Guedpfxoxzuyro Abmoc Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2016, operating hours: 4,248 h, machine/vehicle number: CAI955518, Technical Data: - Operating hours: 4248 h - Load hours: 1978 h - Operating pressure: 10 bar - Free air delivery: 3.34 m³/min - Drive: 400 V / 22 kW Gjdpfx Asycg Hhsbmeuc - Motor speed: 3000 rpm - Required space approx.: W 1300 x H 1250 x D 800 mm - Weight approx.: 490 kg

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Godpfot Hfrcox Abmjuc Operation: Manual remote control and two-pedal foot switch

Condition: good (used), Year of construction: 1999, Compressed Air dyer Gusdpfog Nk Abex Abmsc Operating pressure: 13 - 18 bar Flow rate at 7 bar: 12,7 m^3/min Voltage: 400 V Weight: 660 kg Overall dimensions: 1050 x 1550 x 1500 mm