Arburg MULTILIFT SELECT 15 (2011) linear robot

Arburg MULTILIFT SELECT 15

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Itsdpfx Ahsw Tt R Ievsd Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-109101 / Schaltschrank: 6700-101707, overall weight: 550 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 M2004, input voltage: 400 V, input current: 20 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of construction 09.2017. Axes: 6, Payload: 12 kg. Total weight: 550 kg (400 kg robot arm + 150 kg control cabinet). Itjdpfxjucx Hdj Ahvod Control cabinet: ABB IRC5 M2004. Year of construction: 11.2014 Used, complete, very good condition, tested and can be demonstrated. (See type plates for further details). We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Itsdpfx Asucw S Sjhvjd

Condition: new, New equipment MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as pictured: L-shaped conveyor with double roller separator Infeed section: 600 mm Inclined section: 1300 mm Usable width: 450 mm Outer width: 505 mm (without motor) Itsdpfed Tidxex Ahved Height-adjustable discharge height: 750 - 1050 mm Adjustable angles both in the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on steerable braked castors Side collection plates in the infeed section Optionally also available as angled conveyor with Supergrip belt and separator (see last two photos) Double roller separator with covered belt drive fitted with Super Grip Adjustable discharge chute

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for OeL (heat transfer fluid) -robust sheet steel housing -device on rollers Hydraulics: -sealless immersion pump -Qmax. 60 l/min. - Pmax. 3,8 bar -Tank and heater made of stainless steel -Heating capacity 9 kW -Tank capacity ~20 liters -fittings made of brass/stainless steel -manual oil filling -mechanical level control -indirect cooling system (tubular spiral heat exchanger) Iodpfx Asddv Itehvjtd -cooling capacity ~40.000 kcal/h -manometer -bypass -solenoid valves for cooling Electrical and control system: -Electronic PCB control -Solid State Relay -Safety thermostat -failure monitoring -Connection cable with plug Available in approx. 4 weeks!

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Ijdpfxsuk I Ets Ahvstd

Condition: new, New device MASS International Itjdeh Nyp Uspfx Ahvsd Conveyor belt NI 1 Conveyor belt/unloading conveyor Angle-adjustable conveyor belt with hopper in the feed section available at short notice Example: NI 1 Length 1500 mm Effective width 250 mm Outer width 305 mm (without motor) Height-adjustable dispensing height 600 - 1000 mm Variable inclination adjustment Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m /min mobile on steerable stop rollers Optional: Dimensions on customer request FDA compliant belt Modified belt speed etc.

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminium flat belt conveyor without substructure conveyor belt length: 6000mm drive roller: knurled deflecting roller: crowned PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue FDA compliant according to EU10/2011 Belt width 500mm outside corrugated edge welded on both sides 40mm high T-30 cleats (61 pcs) - 200mm pitch * antistatic due to threads in the fabric of the running side endless welded with stepped finger joint food certificate is included V2A stainless steel underlay plate full surface Iodeg D T N Hspfx Ahvotd drive: motor approx. 1,1KW - horizontally lying * optionally controllable with frequency converter connection 220/

Condition: excellent (used), Year of construction: 2018, overall weight: 272 kg, load capacity: 20 kg, arm reach: 1,650 mm, Our industrial robots are thoroughly inspected and tested before delivery and are ready for immediate use. Robot comes complete with: - Control cabinet - Teach panel - Connection cable Iodpfx Ahewlzzmevstd

Condition: used, Granule dryer, granule drying system, granule conveyor, vacuum conveyor Ijdpfepz Sgfox Ahvstd -Manufacturer: Digicolor, granule conveyor vacuum conveyor -Type: unfortunately without type designation -Housing: material VA -Individual components/dimensions: see photos / technical. drawing -Total dimensions: 930/870/H2880 mm -Transport dimensions: 930/870/H2280 mm -Weight: 141 kg