CIP system

Anlagenbau AG

Condition: used, Year of construction: 1989, System for the secondary filtration of beer after the Kieselguhr filtration. Operating pressure: 10 bar Operating temperature: 140 °C Volume: 169 l Length: 4,10 m Width: 1,30 m Height: 2,0 m Weight: 1700 kg Material: stainless steel Position: standing Base construction: Frame Nwodew Tmqbopfx Ah Hjb Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

Condition: used, Used Alfa Laval model CT-6 "Centritherm" stainless steel contact parts centrifugal evaporation unit. Approximate water evaporation capacity 800 kg/hr. Evaporation unit consists of: 1) CT-6 Centritherm evaporator mounted on skid 2) Alfa Laval model P2-HL plate heat exchanger/condenser 3) Control panel 4) Duplex filter 5) Feed pump model 6) Concentrate pump model 7) Condensate centrifugal pump 8) Vacuum pump Pompe Travaini model TRMB 40-150/F 9) Flash cooler 10) Piping Nwodpfx Ahjlc Dwvs Hjb 11) Tools for lifting cones and the bowl 12) Original technical documentation in German.

Condition: used, functionality: fully functional, tank capacity: 30,200 l, total height: 6,000 mm, inner diameter: 2,800 mm, overall weight: 1,400 kg, TECHNICAL SPECIFICATIONS - Flat bottom tank with 2% slope - Brand: ALFA LAVAL - Total capacity: 30,200 litres - Material: 316 L stainless steel - Interior finish: Cold rolled - Exterior finish: Cold rolled - Temperature controlled ROOF - Conical - 1 off-centre chimney at the front Ø 200 mm - 2 stainless steel flags - 1 thermometer - 6 lifting rings RING - 1 oval door 310×420 mm - 1 partial drain valve DN 65 - 1 connection for level sensor Nwodpfsv I A Nljx Ah Hjb BOTTOM - 2% sloped tray with drain - 1 total drain valve with cap APPENDICES - Tanks compatible and suitable for storing liquid fertiliser - 6-month warranty - Compliant with CE standards

Year of construction: 2025, condition: as good as new (ex-display), Air-cooled process chiller: R32 refrigerant Cooling capacity 72 kW at 7/12°C, internal P3 pump, internal 410 l tank, winter package down to -25°C ambient temperature for outdoor installation, includes variable-speed fans Nsdpfof H A Eyex Ah Hswb Large Dixell display with protective cover

Year of construction: 2023, condition: new, Tank capacity: 270 l Volume flow: 680 l/min Motor power: 5.5 kW Nsdpfxehmi Nqs Ah Hswb

Condition: used, Year of construction: 2022, Used Flash Pasteurizer UDMACHINES Year 2022 Introduction To begin with, the Used Flash Pasteurizer UDMACHINES Year 2022 emerges as a cutting-edge solution in the liquid thermal treatment sector. This machine, meticulously designed by UDMACHINES, is a model PAS-10000-45-2P-E. It’s distinguished by its operational efficiency and precision, setting a new standard in the industry. Key Characteristics UDMACHINES, known for their innovation, manufactured this “Used Flash Pasteurizer” in 2022, making it a relatively new addition to the market. Importantly, it boasts a remarkable operational capacity of 10,000 liters per hour. This capacity is a testament to its significant efficiency, especially in handling large volumes for treatment. Pasteurization Method and Functional Aspects This pasteurizer operates using the flash method, a critical feature. Specifically, it rapidly heats liquids to 90 °C. This process is not only swift but also ensures the effective thermal treatment of the liquid. Moreover, it does so while maintaining the original organoleptic properties of the product, a vital aspect for quality preservation. Current State and Safety Features Currently, the “Used Flash Pasteurizer UDMACHINES” is in storage, a crucial factor for its preservation. This storage condition is ideal for keeping the machine in an excellent state, ready for its next operational cycle. Additionally, the machine is equipped with comprehensive safety features. These features are paramount, ensuring safe and reliable operation, a necessity in today’s stringent industrial environments. Manuals and Maintenance Nwsdpjvgt S Iofx Ah Heb Furthermore, the availability of complete and detailed manuals is a significant advantage. These manuals provide extensive instructions on both operation and maintenance. This availability ensures that operators can fully understand and efficiently manage the machine’s functionalities. Also, it underscores the importance of regular maintenance for optimal performance. Technical Specifications Delving deeper into its specifications, the machine’s design is both robust and user-friendly. It features user-centric controls and interfaces, simplifying the operational process. Additionally, the construction materials are of high quality, ensuring durability and longevity. Industry Applications and Versatility The Used Flash Pasteurizer UDMACHINES Year 2022 is incredibly versatile, suitable for various industries. From beverage production to dairy processing, this machine can adapt to different liquid types and processing requirements. This versatility makes it a valuable asset for diverse processing plants. Energy Efficiency and Environmental Considerations Equally important, the machine is designed with energy efficiency in mind. This efficiency reduces operational costs and aligns with environmental sustainability goals.

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Nwodpjv Ha Uisfx Ah Hjb Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, Factory new electrically heated stainless steel agitator tank Item number: EBB150RWAD Volume: 152L Approx. dimensions: Ø 660mm x cyl. height 625mm total height: 910mm Material: 1.4301 stainless steel V2A Surface: inside and outside matt grinded Welding seams ground max. operating temperature: 110°C Operating pressure tank: ATM -standing design on rollers -upper bottom: central traverse for agitator with two hinged lid halves -Lower bottom: Flat bottom with side outlet DN50 DIN11851 and disc valve -Stirrer flange connection on the upper bottom -2x handle for pushing -1x type plate Heating system: Indirect heating Double jacket around the tank with glycerine filling as heat transfer medium. Heating is done by electric radiator in the double jacket. Power: 9KW Operating voltage: 3PH 400V Incl. supply line 16A CEE plug Centric agitator: Nwedsh Hxxfopfx Ah Hsb Slow running anchor agitator with wall scrapers Type: SRTGMK/0,37-9,5 Make: Schwarzer Rührtechnik GmbH Power: 0,37KW Speed: 0-9,5UPM Operating voltage: 1PH 230V Material in contact with product: 1.4301 stainless steel -Gearbox and motor in latest aluminum technology, make Getriebebau NORD -Gearbox with food-approved oil filling "Klüber". -Massive agitator shaft attached to the agitator motor with sleeve coupling, removable -Stirrer shaft balanced for concentricity in the speed range -1Piece space-gripping anchor agitator in the tank, weld seams ground, arranged close to the wall -2 Teflon wall wipers in the cyl. area, one at the bottom -stainless steel [...]

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Nedpfxsvmq Tie Ah Hewb

Condition: used, Year of construction: 2008, Used Pasteurizer PG 2008 NR 01 all stainless steel pasteurizer/rain cooler with PG intralox mesh, complete with: no. 03 tanks for water recovery with relative pumps Overall dimensions: Njdpfx Ahjvguh Do Howb useful length mm. 13,500 net width 2000 mm The machine is equipped with infeed and outfeed belts for cans or pots, steam regulation group, stainless steel hood for steam outlet, complete with stainless steel electrical panel and all its accessories for operation. The machine was built to process tomato puree in 720ML bottles, it is not equipped with an exchanger, is equipped with a recorder.