Clamping plate 6000 x 1650 (4 pieces)

ANAYAK FL 6000

Condition: excellent (used), Complete steel structure of the production hall. Dimensions - 31.5 x 30 x 9.85 m with the corresponding ROOF sandwich panels made of insulating panels. NOTE - hall is WITHOUT WALL PANELS The hall was built in 2010. In excellent condition! The total weight of the structure is approx. 60 tons. The structure is protected with primer and varnish. The outer columns are made of IPE 500 profile, and the middle one is made of IPE 600. The hall has preparation for a crane track. A project and static calculation have been made for the hall. The hall has been disassembled and transportation and loading can be arranged. Dcodpfx Ajxu E Igeb Tsr

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle bore: 83 mm, turning length: 1,000 mm, turning diameter: 570 mm, turning diameter over top slide: 340 mm, quill diameter: 80 mm, quill travel distance: 200 mm, overall weight: 3,200 kg, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, The machine is in very good condition. Immediately available! Dedpfx Abewxw S Io Tscr Can be tested under power.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm Dcodpfx Abort Unws Tsr - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA Dsdpoxb Ed Uefx Ab Tocr weight of the machine ca. 85 t

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm Dedpfewqr Nlsx Ab Tscr z-travel 860 mm Control Heidenhain iTNC-530 table-size 3.600 x 1.050 mm T-slots 7 x 18 T - slots distance 125 mm distance table - lower edge spindle 25-366 mm table weight 4.200 Kg b-axis +-105 ° c-axis +-360 0 rapid travel x/y/z 30.000 mm/min rotary table Durchm. 1.000 mm max. turning diameter 1.400 mm number of spindle speeds 9.000 U/min/rpm tool taper ISO-50 DIN 69871-AD spindle drive 28,5 kW max. torque on the spindle 240 Nm tool change unit AITEK, 40 fach 20 handwheel Ink. Shuttle operation Inkl Chip coveyor Ink. Internal cooling system 20 bar total power requirement 65 kW weight of the machine ca. 24,8 t dimensions of the machine ca. 8.056 x 5.496 x 3.790 mm

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, year of last overhaul: 2025, RepairFIT by Dornhöfer The Difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 2,500 Y-axis (mm) 1,250 Dcedpfxev Rw Uuj Ab Tsr Z-axis (mm) 1,000 Rotary table size: Length (mm) 1,000 Width (mm) 1,000 Spindle speed range: 15,000 rpm Feed rates: X, Y & Z axes (mm/min): 10 - 10,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Automatic milling head, vertical Tool holder: HSK 63 A Main spindle drive power: 100% duty cycle KW25 - Chip conveyor - Cooling lubricant system - 3D thermal expansion compensation - Portable electronic handwheel Heidenhain HR 410 with 3m spiral cable - INA RUE 45 linear guideway system on all linear axes with central lubrication - Complete splash guard enclosure RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2600-107872, overall weight: 1,000 kg, load capacity: 12 kg, controller manufacturer: ABB, controller model: IRC5 Single, input voltage: 400 V, input current: 9 A, ABB IRB 2600 industrial robot incl. control cabinet & control panel, IRB 2600-12 / 1.85 Year of construction 03.2017. Axes: 6, Load capacity: 12 kg. Total weight: 1,000 kg (850 kg robot arm incl. base + 150 kg control cabinet). Control cabinet: ABB IRC5 Single. Used, complete, very good condition, tested and can be demonstrated. (For further details see type plates). Djdoucxx Hopfx Ab Tscr We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Dcodpsdwf Dbofx Ab Tor

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm Dcedjpbbc Hepfx Ab Ter - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: as good as new (ex-display), Year of construction: 2015, operating hours: 985 h, travel distance X-axis: 905 mm, travel distance Y-axis: 705 mm, travel distance Z-axis: 455 mm, workpiece weight (max.): 3,000 kg, EDM314MF30 - SLM (second-live-machine) General overhaul Travel paths X x Y x Z 900x705x455mm Machine table 1150x850mm Container size 1200x900mm Distance table/chuck 260/710mm Electrode weight 50/500kg Workpiece weight max. 3000kg Overall dimensions of machine 2210x3450x3250mm Dedohfaizepfx Ab Tocr Power supply 400V/DS/50/60Hz Container height 750mm Equipment: MF30 user interface Movable control panel Touch screen Lift speed 15000mm/min (high jump) Eroding generator 60A Integrated cooling unit Cartridge filter system Tool changer 8-fold C-axis with direct measurement, resolution 0.0001 degrees C-axis as positioning - rotation - and erosion axis C-axis 100 rpm. Automatic container tracking Filling, filter and rinsing pump Transport IB Training 12 month warranty