Rolls bending machine - 3 Rolls

AKBEND AHK Y 300 x 3100

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness Predpfx Ajwfc S Tjdnsd -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 08063406 3441, roller (bottom) diameter: 265 mm, roller (top) diameter: 285 mm, roller length: 3,100 mm, sheet thickness steel (max.): 15 mm, overall weight: 8,000 kg, total length: 5,300 mm, total width: 1,200 mm, total height: 1,700 mm, power: 14.71 kW (20.00 HP), type of input current: three-phase, Equipment: emergency stop, Roll bender for sale from a private individual. Prodpfxevl H Rbo Adnod Rolling capacity 5xD = 15 Prebend capacity 5xD = 12 Prebend capacity 1,3xD = 9

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Prsdst Hmlqopfx Adnsd Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Shaft diameter 140 mm Roll feed 3,5 m/min

Condition: new, Year of construction: 2025, functionality: fully functional, coil weight: 15,000 kg, sheet thickness steel (max.): 4 mm, outer diameter: 1,600 mm, coil width: 1,600 mm, type of input current: AC, Coil Slitting Line is used to cut the wider coils into the much more narrow coil strips, in the given dimensions. Servo Steel provides cost-effective Coil Slitting Lines, in any characteristics, according to the customer requirements. All parts of the Coil Slitting Line are manufactures in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Slitting Unit and Recoiler can be controlled from one point. The system is controlled by PLC system, set in the customer language. Psdpsvmgn Nsfx Adnerd

Condition: used, functionality: fully functional, Year of construction: 1989, roller (top) diameter: 200 mm, side roll diameter: 150 mm, sheet thickness (max.): 6 mm, working length: 3,000 mm, Working length 3000 mm Bending capacity 6 mm Bending capacity 4 mm Podeuzm Ayjpfx Adnsrd Top roller diameter 200 mm Diameter of side rollers 150 mm Hydr. folding bearing

Condition: excellent (used), Year of construction: 2013, operating hours: 43,028 h,  Max. force: 180 kN  Max. plate thickness: 6,4 mm Podpfoxftz Ajx Adnord  Axe X: 2500 mm  Axe Y: 1250 mm  Max. workpiece weight: 150 kg  Machine dimensions 6282 mm x 6548 mm x 1990 mm

Condition: new, functionality: fully functional, Year of construction: 2025, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pedpfxet Akt Ro Adnsrd Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, sheet thickness steel (max.): 4 mm, working width: 1,600 mm, coil weight: 15,000 kg, Roll forming machines are designed to make sheet metal into straight formed shapes. The roll forming process takes a continuous flat sheet of metal and power feeds it through a successive series of Hardened Steel Rollers, which station by station shape the metal into a finished shape as it passes through them. Prodsu D Hv Sspfx Adnod We supply the Roll Forming Line to produce all steel profiles of solar panels including the brackets. The dimensions of the profiles are varies depending on the solar panel sizes. Our roll forming line is quite flexible and it is capable to produce all sizes without making any mechanical adjustment. All parts of the Roll Forming Line are manufactured in our facility from A to Z. Starting from the Decoiler (Uncoiler), Straightener and Coil Loading Car, up to the Servo Feeder, Press, Roll Forming Machine, Fly Shear and Stacking Unit can be controlled from one point. The system is controlled by PLC system, set in the customer language.

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Prjdpfx Adeuddcaenjd Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Year of construction: 1988, condition: good (used), machine/vehicle number: D 206089, OFFER 15106 Technical data: - Total payload driven + travelling unit 60000 kg. - Payload per container device 30000 kg - workpiece diameter 500 - 4000 mm - Centre distance of the support rollers mot. adjustable - roller diameter 500 mm - roller width 470 mm - infinitely variable rotation speed 100 - 1500 mm/min - torque 5132 Nm - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on guide rails and can be manually - can be moved manually in parallel - Space requirement for attached unit approx. W 2800 x H 1200 x D 1600 mm - Space requirement with running unit approx. W 2800 x H 1200 x D 1200 mm - Weight attached unit approx. 4800 kg Psdpfx Aehcwzasdnord - Weight with running unit approx. 3800 kg