Digital dipstick (28163)

Accu Rite 5umS/N04094577 PIN38461325213

Year of construction: 1996, condition: good (used), machine/vehicle number: xxxx, High-performance table-mounted threading drill machines with T-slot table Technical specifications: - Threading capacity approx. M3 - M16 - Speed range up to 500 rpm - Working area (swivel radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm - Machine vise with jaw width 200 mm - 3-jaw chuck 250 mm Redpsf Tcy Defx Aahjw - Pneumatic connection with pressure reducer - Mobile base - Space requirement approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Condition: excellent (used), Maximum machinable diameter above the bed: 575 mm Maximum machinable diameter above the slide: 525 mm Rjdpewlgdyjfx Aahew Maximum machinable diameter above the small cross slide: 300 mm Distance between centers: 2000 mm Spindle passage diameter: 51 mm Number of spindle speeds: 18 Spindle speed range: 32 to 2500 rpm Bed width: 400 mm Maximum cross slide travel: 305 mm Maximum upper slide travel: 140 mm Maximum tailstock travel: 150 mm Overall dimensions: 3405 x 1175 x 1345 mm Machine weight: 2200 kg

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch Redpfx Aaedzqb Eohjw - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Redpfx Ajga T Eijahsw Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, thread dia. M3 - M8 mm Rodpfx Aofg U Snsahow

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs for industrial applications Type DALEX 3427 D Nominal power at 50% duty cycle: 35 kVA Secondary short-circuit current: 20.5 kA Electrode force: 580 daN with double-acting cylinder - long stroke 62 mm - pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with universal joint suspension and suspension bracket 10 m connection cable and control cable Rsdpfxogibv Ee Aahjw Electrode arms 350 mm Arm spacing 170 mm with synchronous welding control 15036

Condition: excellent (used), machine/vehicle number: 4220.515, range of control: 20 - 180 A welding circuit at 100% ED: 135 A electrical connection: 380 V space needed: 650 x 550 x 850 mm Rsdpfx Ajd Hn Ufoahsw weight: 118 kg

Condition: new, thread dia. M10 - M33 mm 35/115 U/min. 320 Nm Redpfx Asfg U Sleahsw air pressure 6 - 8 bar working area 400 - 2000 mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Rsdoypud Uopfx Aahew

Year of construction: 2026, condition: new, The robust manual length stop MD 100 d enables you to efficiently increase the productivity and quality of your production. The operator can move the carriage to the desired position quickly and accurately. The specially developed clamping system gives the carriage a very high holding power. The length measurements are taken via an easy-to-read digital display on the carriage. Existing machines / roller conveyors can be retrofitted at any time. Product Details: • suitable for striking steel profiles and solid materials • Trolley with 3 ball bearings • smooth-running for quick and precise length positioning • Manual stop clamping via large adjustable hand knob • specially developed clamping system with very high holding power. • raise and lower manual arm • digital position display with a resolution of 0.1 mm • Standard measurement lengths: 1m to 6m, maximum up to 20m • Total length of the system = measuring length + 0.3 m Redoidmppspfx Aahsw • Left or right hand versions available • Mounting screws • Accesories: -Stop arm with spring damping -manual arm retraction via hand lever -Arm retraction with impact damping via pneumatic cylinder -various material roller conveyors