Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Blow molding Recycling Extrusion Dks Ia U Sieghgd Sofel Waste

Condition: good (used), Year of construction: 2000, Functionality: fully functional, overall weight: 18,000 kg, power: 250 kW (339.91 HP), Single-shaft shredder with electro-hydraulic drive Rotor width 2500 mm Dj Isq I Rkdsa U Sifjkl Rotor diameter approx. 500 mm Hydraulic motor 250 kw

Year of construction: 2012, Condition: excellent (used), Weima sieve for 4 wave chopper ZM 30 Sieve size: : 20/25 mm Dkj Ia U Sjhh Dpkoifol Location: Ex stock 54634 Bitburg - immediately available -

Condition: repair required (used), - Shredder Lindner Komet 1750 Dko Iaewbib Ho U Sifjl - one motor with 160 kW - Without electrical cabinet and hydraulics. - With all manuals. Electric and hydraulic diagrams.

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Dks Ia U Siswbhrdefsl Rotor diameter: approx. 560 mm

Condition: used, Year of construction: 2015, operating hours: 4,079 h, Type of fuel: Diesel Year of manufacture: 2015 Colour: Orange Field of application: Agriculture Drive: Wheel GVW: 19.000 kg CE mark: yes Price: On request Doppstadt AK 510 Bio-Power. Year: 2015. Hours: 4079. Max weight: 19.000 kg. CE machine. 9 tons SAF axles. Moover. Radio Remote Control. Convenyor. Tyres: 385/65R22,5 70%. ID NR: 361. De Ia U Sswdd E Ejifskl The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. Dke Ia U Sieghgd Isfsl These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: good (used), overall weight: 4,000 kg, Low-speed rotor with rotor width 1350 mm Dks Iaet Rr H Ue U Sifjl Motor 22 kw or can also be installed larger hydraulic pusher hopper size 135 x 145 x 1000 cm

Year of construction: 2024, Condition: new, +++++ We manufacture the original +++++ Machine parts for pre-shredders VZ 120 , VZ 110, VZ 90, VZ55 rotor shafts wear parts Copper cable recycling machines Made by Koch Dortmund - Dorstfeld Germany Our non-binding offer - labyrinth rings De Ia U Sijfgiuzefjkl - Dirt deflector - spacer rings - rotor shafts AGB on our homepage Our effort -to help you

Condition: excellent (used), Year of construction: 2018, Weima WLK 800/37 kW shredder with conveyor belt - Top condition - Technical specifications: Funnel size: 800 x 1,450 mm Cutting chamber dimensions: 720 x 700 mm Funnel capacity: approx. 0.8 m3 Rotor working width: 800 mm Rotor diameter: 260 mm Slide travel with segmented bottom: 700 mm Drive power: 37 kW Rotor speed: 100 rpm Number of knives (2 rows): 42 Type and size of knives: concave / 40 x 40 mm, reversible cutting crowns Screen perforation: 40 mm with secondary crusher bars Paint finish: Weima Standard RAL 2002 / 7016 Power supply: 400 V +/- 5% / 50 Hz Includes: V-rotor with milled knife pockets Two rows of knives on the V-rotor Curved knife carriers and screwed knives with countersunk knife screws Super Cut (adjustable counter knife) for regulating the cutting gap Reversible counter knife K-bearings, offset, enclosed, low-maintenance self-aligning ball bearings Fast hydraulics for reversing the slide with various adjustment options Shock valve sits directly on the slide cylinder Unpainted slide chamber Control cabinet (Rittal) with 5 m cable PLC control / Siemens Gimbal-mounted Slide cylinder with load-dependent drawer control Machine frame on rubber vibration mounts Segmented floor on two sides Safety package with gear limit switch and reversing counter Electromechanical drive with Weima WAP gearbox Manually pivoting screen basket Quick access to screen (door) Gear oil cooling prepared Hydraulics quick pre Heavy-duty feed hopper Hydraulic oil preheating Hydraulic oil cooling Ds Ia Uewav Hao Sifskl Connector for conveyor belt + electrical connection Conveyor belt cutout 600 mm Imro Maschinenbau Used discharge conveyor with 1.1 kW Type: 500 x 1200 / 4900 Year of manufacture 2015 Machine number: 510-2770 Location: from stock 54634 Bitburg - available immediately -

Condition: used, Double-shaft shredder Ds Iswbhqtoa U Sifekl Drive 37.50 KW

Condition: excellent (used), Year of construction: 2008, operating hours: 6,882 h, Functionality: fully functional, power: 36 kW (48.95 HP), SHREDDER DESCRIPTION The shredder is equipped with a heavy-duty hopper made of reinforced sheet steel. The hopper is gravity-fed, ensuring a continuous supply of the material to be shredded without manual assistance. The material can be fed using forklift tipping containers, a conveyor belt, or by hand. The hopper is acoustically encapsulated and lined and can be equipped with additional sections depending on the user's individual requirements (e.g., extending the height or adding a hopper extension with wings, and installing a manually or hydraulically operated hinged or sliding lid with a safety lock). The hydraulically controlled ram automatically feeds the material into the rotor in a load-dependent manner. The intelligent ram system is controlled load-dependently via a key switch on the control cabinet. The internal ram guides are made of extremely abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted on universal joints to prevent lateral forces on the piston cups. The patented V: rotor is made of solid steel and has a diameter of 368 mm. It operates at speeds of 60-100 rpm. The robust, concave, quadruple-rotating knives are mounted on special holders housed in small pockets. This unique system allows for a reduced cutting gap between the counter knife and the rotor, ensuring maximum throughput and lower power consumption. Dj Ia U Set Rqx Noifskl The screen mounted below the rotor determines the desired fraction size. Power is transmitted from the electric motors by belts via a high-performance gearbox located at the shaft end on one side of the rotor.

Condition: new, General: The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Applications: Ds Iajghgd Do U Sifjkl Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator.

Condition: good (used), Year of construction: 2014, overall weight: 6,000 kg, power: 55 kW (74.78 HP), Single-shaft chipper with hydraulic feed Dko Ia Uowbhp Ao Sifel 55 kW motor

Condition: excellent (used), Year of construction: 2008, operating hours: 6,882 h, Functionality: fully functional, power: 36 kW (48.95 HP), DESCRIPTION OF THE SHREDDER The shredder is equipped with a heavy-duty feed hopper made of reinforced sheet steel. The hopper is gravity fed, which ensures a continuous supply of material to be shredded without manual assistance. The material can be fed by forklift tipping containers, conveyor belt or by hand. The feed hopper is acoustically enclosed and lined and can be fitted with additional sections depending on the user's individual requirements (e.g. extending the height or fitting a hopper extension with wings and installing a manually or hydraulically operated hinged or sliding lid with safety interlock). The hydraulically controlled ram automatically feeds the material into the rotor depending on the load. The intelligent ram system is controlled load-dependently via a key switch on the control cabinet. The internal ram guides are made of extremely abrasion-resistant plastic (polyamide) and can be readjusted. The hydraulic cylinders are mounted on cardan joints to avoid lateral forces on the piston cups. The patented V: rotor is made of solid steel and has a diameter of 368 mm. It operates at speeds of 60-100 rpm. The robust concave, quadruple rotating blades are mounted on special holders housed in small pockets. This unique system enables a reduced cutting gap between the counter blade and rotor, ensuring maximum throughput and lower power consumption. The screen mounted under the rotor determines the size of the desired fraction. Power is transmitted from the electric motors by belts via a high-dimensioned gearbox located at the shaft end on one side of the rotor. Description Wet classification First pass 2000 KG in 8 hours The second pass is much faster, approx. 1/2 time. this results in 142kg/h Dj Iswc Ethea U Sifskl During the second pass, the screen on the shredder is changed and the opening becomes smaller. Advantages of the system Very robust and simple technology, which has a positive effect on maintenance costs and downtimes. Very high degree of purity of the granulate Very low energy costs thanks to the closed water circuit (water is collected in a 1000 l tank and fed back in), as no compressed air or blower is required Processing of greased cables is no problem Low noise level The system consists of the following assemblies Weima WL 6s 37 shredder with control cabinet Two magnetic separators (conveyor belt) two conveyor belts One wet separation table for cable granulation systems (two additional wet separation tables can be purchased) water pump

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Dks Ieghgdyja U Sifol Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled.

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. De Ia U Sioghgdvsfekl APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. De Iaeghgdns U Sifekl Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes.

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Ds Ia Ujghgdks Sifskl Technical details: Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Construction and demolition wood Ds Ia U Sijghgdgofekl Veneers, MDF and chipboard

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a supplement to the ZWS series. The series was designed as a cost-effective solution specifically for shredding wood residues in small and medium-sized wood processing companies. AT A GLANCE: Compact design Stable welded steel construction Large-volume hopper for material feeding Rotor made of solid steel with screwed knife holders PLC control for fully automatic operation Technical data SMART 600: Inlet 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 - 120 13 rotor knives Technical data SMART 600 S: Dke Ijghgdcoa U Sifjl Inlet 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 - 120 26 rotor knives

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Ds Ia U Sewbwyqjifskl Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 12997, Rotor diameter: 368 mm Rotor width: 1000 mm Rotor blade: 52 Dj Ia U Siewbwyksfekl Stator knife: 1 Inlet cross-section approx. 1000 x 1200 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13187, Rotor diameter: 400 mm Dks Iowbwvlea U Sifel Rotor width: 1100 mm Rotor blades: 54 Stator blade rows: 1 Inlet cross-section approx. 1100 x 1500 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm De Ia U Sowbwuheifjkl Rotor blade: 66 Stator knives: 1 row Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW