Condition: used, Year of construction: 2009, Functionality: fully functional, 3150 kVA cast resin transformer, 15-20 kV +- 2x2.5 % / 660 V, Dyn5, SGB, year of manufacture 2009, dimensional drawing, test report Djln H Ustr E Hxohnscg

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 65 mm -Insertion depth: 40 mm Dcolovvagkjn H Uhnsg -Dimensions: 565/154/H105 mm -Weight: 20.1 kg

Year of construction: 2004, Condition: used, Functionality: fully functional, machine/vehicle number: SN 2826, We have 4 Ultrasonic Flowmeters available wit a maximum capacity of 28.000 m3 / hour each. The units are checked and preserved (N2) Ultrasonic Flowmeter for Natural Gas 24” SN 2165 - 1998 Q SONIC-5 SN 2164 - 1998 Q SONIC-5 SN 2826 - 2004 Q SONIC-4 SN 3012 - 2003 Q SONIC 4 Dcoln H Ujvu T T Iohnjg INSTROMET ULTRASONICS Q MIN: 250m3 /h Q MAX : 28000m3 /h DESIGN PRESSURE 83 bar SKID 2.50 * 1.50 * 1.60 mtr ± 4500 kg EACH

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, power: 30 kW (40.79 HP), Top offer: CHP Spanner wood power plant 30 kW - efficient We are selling our barely used and well-maintained Spanner wood power plant type 30-5.7-V1.1 - CHP wood chip wood gas plant - the perfect solution for sustainable energy generation from wood! This high-quality system was delivered in April 2015, offers an electrical output of 30 kW and a thermal output of approx. 70 KW, it enables cost-efficient self-generation of electricity - ideal for agricultural businesses, forestry businesses or energy-self-sufficient farms. Why this system? ✅ Efficient energy generation from wood - environmentally friendly & sustainable ✅ Fully functional & well maintained - ready for use immediately Dcoln H Uev Acc Ijhnog ✅ Low operating costs & attractive feed-in tariff possible ✅ New price: €132,000 + €4,000 extras - now available at a top price! Technical data: • Manufacturer: Spanner RE² GmbH • Model: Type-30-5.7-V1.1 • Year of manufacture: April 2015 • Power: 30 kW

Condition: used, Year of construction: 2000, 3 Dolevu Hi Nsn H Uhnscg capacity in kVA 44 kVA serial number 34406060011 volt 400 Y V Number of working hours 04786 h

Year of construction: 2016, Condition: defective spare-parts repository (used), machine/vehicle number: 00050, Precision Temperature Control Unit (TCU) - BOFA THE DISPLAY CONTROLLER IS DEFECTIVE! Year of manufacture: November 2016, serial number 00050, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Dceln Hohgr Iho Uhnsg Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 1994, Weishaupt dual fuel burner Weishaupt RGL60/6600kw burner Djlnjm Hdyij H Uhnocg

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers, cable shears, cable cutter Dceln Hovvagdo Uhnog -cable cutters: Split wedge Separating wedge, hydraulic -Intermediate dimension: 95 mm -Wedge length: 100 mm -Number: 3x wedge tools available -Price: per piece -Dimensions: 550/100/H175 mm -Weight: 13.5 kg/piece

Condition: excellent (used), Remko AMT 80-E dehumidifier construction dryer No damp walls, musty smells and mold growth, quick and economical drying at the touch of a button. Where to use the appliances The appliances are used wherever dry rooms are important and economic consequential damage (e.g. due to mold growth) is to be avoided. The appliances are used, among other things, for drying out and dehumidifying: ■ New buildings, industrial buildings ■ Basement rooms, storage rooms ■ Archives, laboratories ■ Weekend homes, caravans ■ Bathing, washing and changing rooms, etc. The recirculation fan draws in the humid room air via the dust filter, evaporator and the condenser behind it. Heat is extracted from the room air at the cold evaporator and cooled to below the dew point. The water vapor contained in the room air is deposited as condensate or frost on the evaporator fins. To avoid moisture damage and cost-intensive work interruptions, the use of a dehumidifier is recommended. Remko AMT mobile dehumidifiers are easy to operate and guarantee trouble-free continuous operation around the clock. This can be avoided: Damp walls Musty odors Rust Condensation water Mold growth Can even be used for drying laundry REMKO dehumidifiers are ideal for economical room drying in cellars and drying cellars, hobby rooms, conservatories, bathrooms, workrooms, leisure rooms, archives, warehouses, etc. Dehumidification capacity max.: 80 l/day Operating temperature range: 3 - 32° Operating humidity range: 40 - 100 % r.h. Air output: 800 m³/hour Motor power: 1400 W Weight: 50 kg Operating hours: 2925 RRP: 2.400 € Deljq D Azusn H Uhnocg You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2016, Condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Dcslnjhgfnbj H Uhnjg Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Doleqww Icjn H Uhnscg

Condition: good (used), splitting wedge, separating wedge, pressing pliers, hydraulic crimping pliers Dcsln H Uevvafyjhnog -Separating wedge: Split wedge, hydraulic -Intermediate dimension: 67 mm -Insertion width: 70 mm -Number: 2x wedge tool available -Price: per piece -Dimensions: 410/130/H62 mm -Weight: 6.5 kg/piece

Condition: new, Areva Teleperm XS control technology cabinet Standard assembly technology For the installation of Teleperm XS systems, the following are usually used SC 9422 control cabinets (2200 x 900 x 400 mm deep), protection class IP30, are usually used. The cabinet is equipped with cable interception devices with shield rails. The enclosure is designed for seismic loads. Cable entry and power supply are generally from below. In the standard enclosure, the subracks are mounted in the middle area. To the left and right of this are areas for mounting enclosure connection elements and transceivers. Connection terminals are used to connect peripheral cables. Other connection technologies such as Maxi-Termi-Point are also possible. Field cables must be shielded with twisted-pair cores. Buses are implemented within an enclosure using conventional cables and outside the enclosure using fiber optic cables. Dolnotzaxms H Uhnecg Teleperm XS is suitable for systems with surface earthing and for systems with central earthing (CEP). Subrack Different configurations of subracks are used depending on the task. In the basic version, the module rack has a continuous backplane bus and offers 21 slots. If large quantities of signals need to be recorded, extension subracks can be connected. Variants are also supported, such as - Split subracks with two smaller, independent computers (10 slots each, each with its own fans and power supply) - Mixed configurations such as the compact combination of a computer with the associated signal processing modules SC 9422 control cabinet with cross-connection Double doors Enclosure indicator lamp Height × width × depth: 2200 × 900 × 400 mm Protection class: IP30 Power consumption: typically 550 W max 1280 W Weight: 300 kg Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. Dsln H Uhehg Rcxjnscg To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: good (used), Pressing pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand pressing pliers, cable cutters, cable shears, hydraulic cable cutters Djln Hevu Tv No Uhnscg -Manufacturer: VEB WMW, Hydraulic cable cutter with built-in hand pump -Type: PT 300 08 300 -Passage: 45 x 27 mm -Dimensions: 710/130/H115 mm -Weight: 9.7 kg

Condition: good (used), Siemens Simatic S5 power supply 6ES5 955-3LC42 Manufacturer: Siemens Type: 6ES5 955-3LC42 Simatic S5 power supply E Stand 1 More articles - new and used - can be found in our shop! Dslnsd I Hw Ij H Uhnecg International shipping costs on request!

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Djlnohgg Rro H Uhnecg We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo Dcolnovu Sqxo H Uhneg -Dimensions: Ø 120 x 330 mm -Weight: 11.4 kg

Condition: excellent (used), Schleich GLP2-E safety tester, insulation tester GLP2E tester Item condition: Used, in perfect condition Dcjln Hjivd I So Uhnog SHELF-B-PD(BOR) You can find more testers - new and used - in our store! International shipping costs on request!

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers Dolofnk I Ejn H Uhnocg -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm -Weight: 11.2 kg

Condition: refurbished (used), ABB SDS 100 servo drives SDS105-077A0-670V01-0070 3ADT211038R1200 SN 53.4kVA overhauled by the manufacturer EPROM Input 670V DC Output 0-400V AC Deln H Uod Iu Uwjhnocg Very large selection of ABB Servo Drive. Our devices were all overhauled. See pictures. Devices are shipped regardless of the date of the overhaul. Please note that the colors on your screen may differ slightly from the original colors.

Condition: good (used), Year of construction: 1991, transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer -Manufacturer: Rohde, transformer autotransformer type SPAR YNAO -Power: 300 kVA -Voltage: Pri. 440V/sec. 380V/60Hz -Technical data: see photo type plate Dcolneru Ra Ie H Uhnsg -Dimensions: 1000/570/H760 mm -Weight: 388 kg

Condition: excellent (used), KEB inverter EMC filter 180A, 0 ..... 528V UL. 480V 150A Dsln Hsd A Ndfo Uhnjcg Ambient 3K3, Mat. 23E4T60-1001 line International shipping on request!

Condition: excellent (used), KEB frequency converter 52 KVA, AC MOT 37KW 2 / 4P 50/60 HZ Art. No. 20F4F3R-4R01 frequency converter 0..10000 RPM Dceljd A Ndqon H Uhnog International shipping on request!

Condition: refurbished (used), ABB SDS 100 servo sürücüler SDS102-069A0-400V00-0000 3ADT211027R0001 46kW üretici tarafından elden geçirilmiş 670V DC çıkış Giriş 380-400V AC 39 kg Çok geniş ABB Servo Sürücü seçimi. Dcsln H Uhod Iu Uloneg Cihazlarımızın hepsi elden geçirildi. Resimlere bakınız. Cihazlar, elden geçirme tarihine bakılmaksızın gönderilir. Lütfen ekranınızdaki renklerin orijinal renklerden biraz farklı olabileceğini unutmayın.