Used peripheral devices for sale (104)

Condition: good (used), Year of construction: 2018, MOTAN METRO G 1.5 I-HSS Stock no.: 503658 Machine type / Device type: Suction conveyor Manufacturer: MOTAN Nsdpfx Asxyi E Hjd Njcl Model: METRO G 1.5 I-HSS Year of manufacture: 2018 A total of 5 units in stock

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015) Ncsdpfx Adexx Tmrs Nol

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years Ncjdpexx Ti Tofx Ad Nsl STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Ncedpfx Adsx Dm Rzj Njl Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Year of construction: 1993, condition: good (used), BFM overhead cutter for PE-PS-PA pelletizing Ncodpoipyh Isfx Ad Nol

Condition: not inspected (used), EWIKON 68010.208 D Ncodpfx Adexcnkgj Nsl

Condition: not inspected (used), EWIKON 68010.204D Ncsdpoxcnk Hjfx Ad Nol

Condition: not inspected (used), EWIKON Nodpfx Aexcniied Nscl Type: 68010.204D

Year of construction: 2000, condition: used, Used filterless hopper loader Ncedpfxedlpyne Ad Nol

Year of construction: 2000, condition: good (used), Number: 0107058 Cooling capacity: 1,100 W at +6° C Cooling capacity: 1.270 kcal/h at +6° C Max. temperature: 44 °C Nedpfxehri Ahe Ad Nscl Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Weight: 80 kg

Condition: used, functionality: fully functional, The separator is for sale from the company trio-technik ; Filling via funnel with a plexiglass cover L: 900mm W: 700 mm H: 700-1200mm Inclination max. 20 degrees Speed const. Njdpfxjuhzvlo Ad Njcl Discs can be adjusted

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Ncjdpju Icgbefx Ad Njl Year 2007 Missing sensors Available catalog

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Nodpfsxqzkpjx Ad Njcl Manufacturer: MOVACOLOR Type: The Balance There are 3.0 pcs. dosing units available.

Condition: like new (used), operating hours: 6,500 h, overall weight: 350 kg, As-new cooling unit from the company PIOVAN. All important data can be found in the documents below! We have two units from a very, very clean production. Ncsdpfx Adoxf Tu No Nel

Condition: good (used), SATORIUS electronic balance, price: 1.150 Euro, contact: Mr. Rainer Eckerle Ncjdpfxedblbbo Ad Njl

Condition: used, hot runner control device Günther DPT 10 10x fach 230 Volt Nedpfx Ajh Uucfod Nocl price: 1.850 Euro contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2013, Motan MEtronet Vacuumpump 4,3 KW mit Vorabscheider year 2013 price: 5.750 € contact: Mr. Rainer Eckerle Nodpfx Ajt Sib Sjd Njcl

Condition: good (used), Year of construction: 2006, Motan BCB 75 Vacuumpump 7,5 KW +Vorabscheider year 2006 price: €4,550.00 Nodot Sic Ajpfx Ad Necl contact: Mr. Rainer Eckerle

Condition: good (used), central separator , price: 1.650 €, contact: Herr Rainer Eckerle Ncsdpfxsd Ewc Is Ad Nel

Condition: used, hot runner control device PSG NR 4 06 6 x fach 220 V Ncsdpeg Htcvjfx Ad Nol price: 1.450 Euro contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2006, Motan Metro HCG 10 2 – comp. Abscheider Nedjt Sibxspfx Ad Necl year 2006 price: 990 € contact: Mr. Rainer Eckerle

Condition: good (used), central separator , price: 1.450 €, contact: Herr Rainer Eckerle Ncedod Ewc Nepfx Ad Nol

Condition: good (used), Year of construction: 2007, Motan Centralconveying control Metronet Light für 8x Abscheider year: 2007 price: 3.750 € Ncjdpjrun Sdofx Ad Nsl contact: Mr. Rainer Eckerle

Condition: excellent (used), Year of construction: 2012, operating hours: 2 h, functionality: fully functional, overall weight: 25 kg, type of input current: DC, input voltage: 220 V, power: 220 kW (299.12 HP), volume flow: 4.6 m³/h, control voltage: 24 V, year of last overhaul: 2025, Volumetric feeder type DM30-38 with horizontal feed line Equipped with D.50 mm screw at 50 mm pitch Supplied without hopper 1/38 brushless geared motor - 220 W - 3000 rpm Power supply 220 V mono 50 Hz Weight : 25 kg Ncedpferl Rv Tjx Ad Njl

Condition: like new (used), Year of construction: 2019, functionality: fully functional, type of input current: DC, input voltage: 220 V, tank capacity: 20 l, volume flow: 1 m³/h, control voltage: 24 V, year of last overhaul: 2025, Equipment: type plate available, The MC Weight, part of our measurement solutions, was introduced to the market to provide accurate and real-time measurement of extrusion line throughput and main material consumption. Equipped with an advanced kg/h system and integrated load cells featuring a loss-in-weight function, the MC Weight delivers a real-time overview of extrusion line capacity and primary material consumption in kg/h. With the MC Weight, your main material measurement technology ensures that the optional gravimetric dosing units (MCS Continuous Feeder) automatically adjust the flow rate based on variations in bulk density and extruder output. The MC Weight is ideal for precise measurement of extrusion line capacity and material consumption. Thanks to its modular, scalable design and removable stainless steel hopper, the MC Weight saves you time and money by making hopper cleaning and material changes possible with minimal downtime. Nsdpfx Aderlm Slj Nscl Designed for extrusion manufacturers focused on control and efficiency, the MC Weight system stands out with its modular design and stainless steel hopper, ensuring reliable operation with free-flowing powders such as PVC dry blends, masterbatches, and regrinds up to 180°C. Additionally, it enables control of multiple co-extruders via a single interface, offering maximum user-friendliness and operator control. Standard equipment 20-litre stainless steel hopper – capacity up to 500 kg/h Two integrated 50 kg load cells 8” colour touchscreen Pneumatic guillotine valve, 40 mm outlet diameter Calibration weights The MC Weight is part of our modular dosing concept and can be tailored to your production process. Ready to enhance your dosing accuracy and efficiency?