Used paternosters & storage lifts for sale (99)

Condition: reconditioned (used), Mechanically overhauled machine with new LTG-StoreControl L control system 2 identical machines available External dimensions: Height 5,450 mm Width 3,380 mm Hnedpsn D A N Hofx Ahvji Depth 2,920 mm 60 beams with a payload of 210 kg each with clear usable dimensions: W = 3,050 mm D = 813 mm H from 45 to 750 mm Total machine load capacity up to 2 x 33,650 kg Start of the service opening 900 mm above the top floor, then 800 mm high Color: GRAY/BLUE, beams sendzimier-galvanized, surfaces cleaned, signs of wear possible Performance values: Vertical drive 1 x 4 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG control system StoreControl L. Control system expansion available as an option. Currently 5 (formerly 6) identical machines available. External Dimensions: Total height: 5,900 mm Width: 1,580 mm Depth: 2,680 mm 30 carriers, each with a load capacity of 250 kg, in usable clear dimensions: Width = 1,250 mm Depth = 825 mm Height: 0 to 750 mm Total load capacity up to 20,000 kg Hedpfx Aheg Dckuevoni Operation opening starts at 860 mm above finished floor level, with a height of 1,000 mm Color scheme: grey / dark grey, carriers are sendzimir-galvanized Surface cleaned, signs of use and minor deformations possible Performance data: Vertical drive: 1 x x.0 kW / 400 Volt Horizontal drive: 1 x 0.xx kW / 400 Volt Additional features: Manually operated lifting door Subject to errors, technical modifications, and deviations in details/photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Hedod Spf Rjpfx Ahveni Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Hsdpfx Ajhfxkaehvjni Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), machine/vehicle number: 2022-015, Mechanically overhauled machine with new LTG-StoreControl L control system Control system upgrade available as an option External dimensions: Height 6,210 mm Width 2,780 mm Depth 2,908 mm 50 beams with a payload of 331 kg each with clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 35,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Color: GRAY/ORANGE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear and minor deformations possible Performance data: Hnsdsd Rh Dwspfx Ahvsi Vertical drive 1 x 5.2 kW / 400 volts Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 5860 mm Width 2940 mm Depth 1180 mm 25 carriers with a payload of 165 kg each with clear usable dimensions: Hedpfjdnzg Njx Ahvsni H = 380 mm W = 2500 mm D = 410 mm Chain pitch 412 mm Total payload up to 4110 kg Storage table at 1000 mm above the top floor with rubberized worktop Color: GRAY/BROWN, surface cleaned, signs of wear possible Drive motor power: 1 x 1.8 kW / 400 volts Base machine for this modernization: SYS 180 from Kardex Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany and Austria and several neighboring countries

Condition: new, The manufacturer Zambelli Metalltechnik GmbH & Co. KG is discontinuing support for all paternosters and storage lifts as of December 31, 2023. The company will no longer provide support or spare parts in the future. LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits and support for these devices. Hsdpfjiy Dw Hex Ahveni Please feel free to contact us at any time.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, total height: 5,000 mm, total width: 2,020 mm, total length: 2,780 mm, load capacity per storage section: 220 kg, construction height: 70 mm, empty load weight: 40,000 kg, warranty duration: 12 months, The unit comes from a lift system comprising 5 devices. Therefore, the lateral shaft claddings are of a simplified design, produced without an access door. The machine height is adjustable. Storage lift includes delivery, installation, DGUV acceptance, and warranty. Hsdpfxox Rp Ewj Ahvjni

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, total height: 6,000 mm, total width: 3,400 mm, total length: 2,780 mm, load capacity per storage section: 260 kg, construction height: 70 mm, empty load weight: 40,000 kg, warranty duration: 12 months, The unit comes from a lift system comprising 5 devices. Therefore, the lateral shaft claddings are of a simplified design, produced without an access door. The machine height is adjustable. Storage lift includes delivery, installation, DGUV acceptance, and warranty. Hnedpfex Rpyzex Ahvsi

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, load capacity per storage section: 500 kg, empty load weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The payment period is one week after purchase of the machine! Placing a bid obliges you to collect the machine on time between 17.11.2025 and 21.11.2025! Number of pallets: 55 included, space for 74. TECHNICAL DETAILS Load capacity per storage section: 500 kg Maximum container load: 500 kg Maximum total load: 40,000 kg Tray size: approx. 1860 x 825 mm MACHINE DETAILS Power: 6 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 7,500 mm Hnodpfxexm U U He Ahvji Weight: 5,000 kg

Condition: reconditioned (used), total length: 2,650 mm, total width: 2,760 mm, total height: 7,510 mm, Modernized machine with new LTG-StoreControl LL control system External dimensions: Height 7510 mm Width 2760 mm Depth 2650 mm 40 beams, each with a payload of 170 kg with clear usable dimensions: W = 2448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 9,000 kg Hnedpfx Ahodpd Scjvji Start of the service opening 900 mm above the top floor, then 750 mm high Color: GRAY/GRAY, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Mechanically overhauled machine with new LTG StoreControl L control system External dimensions: Height 8,760 mm Width 2,778 mm Depth 2,800 mm 2 identical machines available Hnsdpfxed Rh Dvs Ahvoi 48 beams, each with a payload of 340 kg with the following clear usable dimensions: W = 2,448 mm D = 816 mm H from 50 to 720 mm Total machine load capacity up to 2 x 20,000 kg Start of the access opening 900 mm above the top floor, then 750 mm high Color scheme: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur Performance values: Vertical drive 1 x 3.0 kW / 400 volts Horizontal drive 1 x 0.37 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system upgrade available 2 identical machines available External dimensions: Height 4730 mm Width 3270 mm Depth 1680 mm 29 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 160 kg per usable level. Hsdpsdnhz Uefx Ahvjni Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: Gray / Gray Surface cleaned, signs of wear may occur Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors and technical changes or deviations in details in the photos. Delivery & installation currently mainly in Germany, Austria, and other neighboring countries.

Condition: good (used), Year of construction: 1985, Megamat carousel Type: 130-225-42 Device no.: 4492 Year: 1985 Hjdpfjvc Hk Nsx Ahveni Rack height: approx. 5410 mm Unit width: approx. 2670 mm Unit depth: approx. 1300 mm + 300 mm table top Number of shelves: 42 Shelf width: approx. 2155 mm Shelf depth: approx. 410 mm Shelf height: approx. 200 mm Shelf load: 100 kg Total load: 4,200 kg Color: beige/green

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Hsdpfx Ahsxyygueveni Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow Hsdpfx Ajff Huwehvsni • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. Hedsxmgwajpfx Ahvoni We ask for your understanding

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Hnsdpoxr Ng Uefx Ahvsi Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06007153/001, total height: 6,050 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 210 kg, construction height: 6,050 mm, input voltage: 400 V, Automated Warehouse Optimization Storage System KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial Number: 06007153/001 Year of manufacture: 2006 Total load capacity: 2 x 33,550 kg Load per tray: Medium: 205 kg (evenly distributed) Tray dimensions: 3050 x 864 mm Number of trays: 36 units (more or heavier trays available upon request) Shuttle dimensions (W x D x H): 3380 x 3074 x 6050 mm (Height adjustable to available space) Power supply: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA This offer is valid as long as the system is unsold Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 36 trays, Medium: 210 kg each, evenly distributed; more or heavier trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions (W x D x H): 3380 x 3074 x 6050 mm - System footprint approx.: 10.39 m² - Storage capacity with 36 trays: approx. 95 m², each tray approx. 2.64 m² - Electronic volume measuring system with 25 mm grid on the display Hnjdpfx Ahjxq Tbtjvji - Access opening with sliding doors for protection of personnel and stored goods - C2000 Control System, with B/W OP2000 display - LED anti-glare lighting above access point - Toothed-belt drive for minimal noise - Toothed-belt drive for fastest order picking - Shelf spacing adjustable in 25 mm increments by configuring support profiles, ideal for high-density storage - Weight management system monitors the load per tray - Includes light pointer Price: On request only by e-mail Price: excluding VAT, including transport and installation Delivery time: from stock Machinehandel De Leeuw BV specializes in used paternoster systems from brands such as Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automated storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Storage paternoster, Kardex, approx. 5.96 m high, 250 kg / carrier – used - : Price ex-works: €14,950 (net), disassembled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer Kardex Model: IND-250-4010.5 Device number: 116/24464 Year of manufacture: unknown, prior to 2000 Device height: approx. 5.96 m Device width: approx. 3.01 m Device depth: approx. 1.24 m + 0.30 m for the worktop = total 1.54 m Number of carriers: 40 units Carrier dimensions: Width: approx. 2.48 m Height: approx. 23 cm Depth: approx. 41 cm Max. load per carrier: 250 kg Permissible total load: 10,000 kg Dead weight: 1,000 kg Carrier selection by carrier number no longer functional – device must be operated via up/down button. Condition: good Hodjwt Sflepfx Ahvjni Available: immediately Location: 45481 Mülheim a.d. Ruhr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total height: 4,950 mm, total width: 3,380 mm, total length: 3,075 mm, table height: 833 mm, Equipment: safety light barrier, We inform, that we currently only sell or deliver to the Hnjdpfow Emtnex Ahvoi D-A-CH and Be-Ne-Lux countries. We ask for your understanding

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, We inform, that we currently only sell or deliver to the D-A-CH and Be-Ne-Lux countries. Hedpouriwgjfx Ahveni We ask for your understanding

Condition: good (used), Year of construction: 2002, Storage Carousel, Megamat, approx. 3.04m high, 350kg per tray – used - : Ex-works price: €9,950 (net), for self-dismantling! Manufacturer: Megamat Model: 1568/267/16 Year of manufacture: 2002 Serial number: 16178 Equipment height: 304 cm Equipment width: 388 cm Hedpfx Aoxbhlnohvoni Equipment depth: 205 cm Number of trays: 16 Intermediate shelves: approx. 16 pcs - If yes: Quantity: 64 - Removable? Yes Tray dimensions: Height: approx. 20 cm (approx. 10 cm with intermediate shelves) Width: 325 cm Depth: 60 cm Total load capacity: 5,600 kg Load per tray: 350 kg Imbalance: 1,000 kg Operation: with Kardex Drive and SAP integration Power supply: 3/N/PE 230/400V, 9A, main fuse 16A Condition: good Available: immediately Location: Herrenberg

Condition: excellent (used), Year of construction: 2003, A Weland Compact Lift 2440 is now available for sale. The machine has been kept in a clean, well-maintained environment and receives annual servicing, making it reliable for many years to come. It has completed approximately 50,000 cycles so far. Typical usage is around 10,000 to 20,000 cycles per year, so this machine has seen light use. The lift is 6,000 mm high, but the height can be adjusted as needed. It is a Vertical Lift Module (VLM) that works well in warehouses with changing storage demands and can be shortened if required. The VLM is equipped with 25 trays, making it ideal for storing taller items. Additional trays are available from Relevator if needed. Hedpfx Aexpuyuehvoni Manufacturer: Weland Solutions Year of Manufacture: 2003 Model: Weland Compact Lift 2440 Height: 6,000 mm (adjustable) Width: 2,950 mm (lift) / 2,440 mm (tray) Depth: 2,950 mm (lift) / 820 mm (tray) Number of Trays: Approx. 25 per lift Maximum Load per Tray: 400 kg Electrical: 400V, 25A

Condition: excellent (used), Year of construction: 2019, We now have 13 SSI Schaefer SLL LogiMat Vertical Lift Modules from 2019 available for sale. These machines are in very good condition and have been serviced every year by the manufacturer since they were installed. Thanks to this regular maintenance and careful use, the machines are still very reliable. These Vertical Lift Modules are designed to provide maximum storage in a small space. Tray size: 4.025 mm wide × 815 mm deep Tray area: About 3.3 m² Number of trays per machine: Around 49 Hnjdpfxewi Iywj Ahvei Total storage area per machine: About 160 m² Floor space used per machine: Only 14.12 m² Each machine includes an optional light pointer, which shows exactly where to pick items. This helps make order picking faster and safer. To use the light pointer, the machine must be connected to an ERP or WMS system. The machines have only run about 30,000 to 60,000 cycles each – about 1 to 2 years of normal use. The height of the machines is 8,200 mm, but they can be adjusted to fit your warehouse ceiling during installation. Specifications – SSI Schaefer LogiMat SLL Vertical Lift Module Manufacturer: SSI Schaefer Model: LogiMat SLL 4025-815-8200/400 Year of Manufacture: 2019 Condition: Very good - serviced annually by the manufacturer Number of Units Available: 13 Height: 8,200 mm Width (Machine / Tray): 4.570 mm / 4.025 mm Depth (Machine / Tray): 3.092 mm / 815 mm Floor Space Used per Unit: 14.12 m² Number of Trays per Unit: Approx. 49