Condition: good (used), EA Elektro Automatik Type: EA-EL 9080-200 EA Elektro-Automatik Electronic Load (2.4kW) 0-80V 0-200A Technical Data: Mains Input: Mains voltage switchable 115V/230V Mains frequency 50/60Hz Fpodpfjzhkcijx Ad Isi Mains fuse T2.5A DC Input: Input voltage U nominal 0…80V Input power P nominal 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C ambient Input current I nominal 0…200A Overvoltage protection limit 1.1 * U nominal Maximum permissible input voltage 100V Voltage regulation: Setting range 0…80V Display resolution 100mV Accuracy

Condition: excellent (used), Optical Emission Spectrometer Ultima 2 benchtop unit, sequential spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order, 160-800 nm without image Rapid overview analysis Fpodpfxezhkcce Ad Iji IMAGE: Rapid overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the RF coil of the Ultima 2 Argon humidifier – for the analysis of solutions with high salt content. ULTIMA 2 ICP-OES – Optical Emission Spectrometer Reliable, highly efficient 40.68 MHz semiconductor generator Complete and precise wavelength scan from 160 to 800 nm as standard Highest practical resolution

Condition: new, Year of construction: 2005, functionality: unexamined, machine/vehicle number: 2780552, Hello, selling a new Mettler Toledo weighing bridge Type: MB60S in original packaging. Fpedpfxovl Ir Tj Ad Iei Weighing cover 500x400mm All data for this model can be viewed under Mettler Toledo. Model is no longer produced. Shipping possible - Please enquire about shipping costs.

Condition: ready for operation (used), functionality: fully functional, The unit comes with rotor and accessories !!! ⚙️ Thermo Scientific Cytospin 4 — technical specs 🧪 Performance Speed range: 200 – 2000 rpm Max RCF: ~850 × g Capacity: up to 12 specimens per run Timer: 1 – 99 minutes Program memory: up to 23 stored routines 📏 Physical & electrical Dimensions (H × W × D): ~9.5 × 16 × 24.5 in (≈ 24 × 40.5 × 62 cm) Weight: ~12 kg (26.5 lb) Power supply: 100–240 V, 50/60 Hz Power consumption: ~150 VA max 🧠 Control & programming Digital keypad with programmable protocols Acceleration control (multiple ramp settings) Speed and time display windows Standby mode for power saving Fpjdpfx Adszivxlo Iei 🔒 Safety & design Auto-locking lid (won’t run unless locked) Imbalance / overspeed / lid alarms Sealed rotor head with viewing window Spill-resistant internal design Complies with IEC 61010 safety standard 🧬 Functional features Produces thin-layer cell deposition on slides Compatible with Cytospin 1–3 protocols Supports disposable or reusable sample chambers Designed for low-cellularity samples (e.g., CSF, urine) Good working condition. Please check out our other listings as well.

Condition: used, Industrial High-Vacuum Extraction Fan / Dust Collector, TEKA TK-LMD 508, Used machine Manufacturer: TEKA Absaug- und Entsorgungstechnologien GmbH (Velen, Germany) – Premium extraction and environmental technology manufacturer Type: TK-LMD 508 Serial number (Masch.-Nr.): 00113963 Year of manufacture (Bauj.): 1999 Reference number (AB): 8798 Protection class (Schutzart): IP 54 (Protected against dust and splashing water) Overall dimensions: 370 x 380 x 740 mm Volume flow rate (Volumenstrom): 320 m³/h Max. static pressure (max. stat. Pressung): 21,000 Pa (Extreme suction power even through thin hoses) Motor power (Motorleistung): 1.2 kW Rated current (Nennstrom): 5.2 A Supply voltage (Anschlussspannung): 230 V Control voltage (Steuerspannung): 230 V Frequency (Frequenz): 50 Hz Type of current (Stromart): 1Ph+N+PE (Single-phase design, operates from a standard wall outlet) Fpodpszg Uw Uefx Ad Iei Suitable Application Areas: This unit is a specialized, high-vacuum extraction fan designed for extreme suction pressure rather than high air volume. It is perfectly suited for the following fields: Welding fume extraction: Direct torch-integrated (next to the nozzle) point-source extraction in welding shops. Laser engraving and cutting: Extraction of fine, toxic smoke and gases generated during laser cutting or marking processes. Electronics manufacturing: Point-source extraction of soldering fumes across multiple workbenches or automated soldering lines. Dental and medical laboratories: Precision extraction of fine dust, grinding, and drilling debris. Printing and fine mechanics: Continuous extraction of fine dust, toner particles, or cutting debris through narrow diameter hose networks.

Condition: used, Manufacturer:SANYO Type: MDFU-442 Volumen: 426 Ltrs Sizes of the cooled room: 800x900x1800 mm Refigerant: R-134a Weight: 240 kg Fsdpoy Udc Ejfx Ad Ispi

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Fpedpfxoy Udfms Ad Isi Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Year of construction: 2002, condition: good (used), Manufacturer: HAPA Type: 421 Year: 2002 Power: max.300 vials per minute. Label size: min: 15x 28mm max: 60x 76mm Vial diameter: 8-30 mm Pharmacy Fpsdpfjcq Tm Esx Ad Isi

Year of construction: 2018, condition: used, This listing is for the Hamilton Microlab STARlet M The unit is in full working condition and ready for immediate use. Software is included A precision liquid handling system designed for automated pipetting and sample preparation. Known for accuracy and repeatability, it supports efficient lab workflows in research and analytical environments. Compact and user-friendly design. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Fpjdpfx Adoy Ex Uqj Isi Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: like new (used), Year of construction: 2022, operating hours: 125 h, functionality: fully functional, machine/vehicle number: SN22000321, overall weight: 50 kg, The Fotona StarFormer® is a non-invasive, high-intensity magnetic stimulation device (HITS™) designed for painless muscle strengthening, toning, and body contouring. It uses magnetic pulses to induce deep muscle contractions for strengthening the glutes, abdomen, arms, and back (TightWave®), or pelvic floor muscles to treat incontinence (IntimaWave®). The StarFormer® PRO model is a comprehensive system offering both TightWave® and IntimaWave® applications, providing versatile treatment options for both women’s and men’s health clinics. This is a high-quality, more affordable alternative to the expensive BTL Emsella and Emsculpt devices. Fpsdpfxsy I Tiue Ad Isi

Condition: used, The item comes with a selection of spare parts, including: bellows segments, graphite sheets, capacitor transmitters, centering rings in various sizes, Pirani transmitters, inline valves, various cables, and more. Fpodpozgv R Nsfx Ad Ioi

Condition: used, 10 containers dedicated to hydrogen testing L 6058 x W 2438 x H 2896 mm Ready to be connected to cooling/electrical/H2-N2 systems Cooling capacity: 100 kW Fpjdpfxjzgv Rvj Ad Iji Electrical capacity: 40 kW (can be increased to 100 kW) Bench automation software provided (Horiba STARS) Durability testing Characterization testing EU declaration of conformity available

Year of construction: 2010, condition: excellent (used), functionality: fully functional, the laminar flow cabinet was located in a cleanroom. Model Parameters BBS-H1300 BBS-H1800 External dimensions (W*D*H) 1300*820*2040 mm 1800*820*2070 mm Power supply AC 220V±10% AC 110V±10% Frequency 50 Hz 60Hz Power consumption 400W 500 W Airflow velocity 0.3～0.5m/s Fjdpezia Idofx Ad Ispi UV lamp power consumption 30W*1 30W*1 Fluorescent lamp power consumption 12W (LED)*1 16W (LED)*2 HEPA filter 99.999% efficiency at 0.3 µm Noise ≤65dB

Condition: excellent (used), Atlas Type: CI3000+ Ci3000+ Weather-Ometer/Fade-Ometer Model: CI3000W Year of manufacture: 06/2022 Operating time: Device 816.5 hours Lamp operating time: Device 647.4 hours Total lamp operating time: 88.9 hours Atlas CI3000+ Xenon Weather-Ometer with calibration case The Ci3000+ Weather-Ometer and Fade-Ometer, with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering devices. The 3000 series has been approved by many OEMs in the textile, paint, and coating industries, as well as the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. The 3000 series has been certified according to CE, UL, CSA, ISO, and EN standards. The main features of this device are: a rotating sample rack to maximize the homogeneity of all samples; customizable nozzles for uniform front and back spraying of samples; ASTM black panel thermometer or ISO/DIN black standard thermometer for regulating and monitoring the temperature at the sample level to ensure the repeatability of the tests. 4500 W water-cooled xenon lamp Total exposure area 2188 cm2 (339 in2) Fpjdpezgr Nhjfx Ad Iji 12-inch TFT full-color touchscreen control panel - displays all test parameters Direct setting and control of black panel (BPT, non-insulated) or black standard (BST, insulated) temperature Direct setting and control of relative humidity Direct setting and control of the air temperature of the sample chamber Display of diagnostic messages 14 factory-preprogrammed test methods (Weather-Ometer); 6 factory-preprogrammed test methods (Fade-Ometer) Properties: Type: Climate Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Voltage: 340-415V 43A 50/60Hz 〜3/N/PE 8kW 410 kg Condition: used Scope of supply: (See image) (Subject to change and errors in the technical data, information provided!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min Pump type: Pressure pump, suction pump Temperature range: -25°C to +100°C Max. pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H): 48.3 x 27.3 x 71.1 cm Length: 48.3 cm Internal length: 18.4 cm Width: 27.3 cm Internal width: 17.3 cm Height: 71.1 cm Internal depth: 20.4 cm Weight: 36.1 kg Electrical requirements: 230 V 50 Hz Fpodpfx Adszgcgdo Iei Voltage: 230 V Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Julabo Type: FC 600 Technical specifications for FC 600 Dimensions (W x D x H): 36 x 54 x 49 cm Weight: 48 kg Temperature values: Operating temperature range: -20 ... +80°C Fpodezgcb Ispfx Ad Iei Temperature stability: ±0.2°C Supply voltage: 230V/50Hz, 7 A Performance values: Heating power: 1.2 kW Cooling capacity: 20°C: 0.6 kW, 0°C: 0.34 kW, -10°C: 0.21 kW Refrigerant: R134a Global warming potential: 1430 Filling weight: 290 g Pump performance: Flow rate: 20 l/min Pump performance: Delivery pressure: 0.5 bar Filling volume: 6 to 8 l Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Millipore water purification system, Elix 3. Fedpfszgcbzox Ad Ijpi Purifies 3 liters of water per hour. Condition: used. Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: good (used), Cole Parmer vacuum furnace Cole Parmer vacuum furnaces are designed for drying under carefully controlled conditions - normal atmosphere, vacuum up to 30" Hg or inert gas atmosphere. The furnace enables drying, vacuum embedding, electroplating and processing of electronic components. Non-corrosive, non-flammable gases such as nitrogen and carbon dioxide can be used in the furnace. All controls and connections (except the power supply) are located on the front in a vertical panel. Manufacturer: Cole Parmer Model: 5053-12 Power: 600 W Voltage: 240 V Dimensions: 510 x 420 x 1200 mm Fpsdpfx Adewxxgae Iei You can find more items - new and used - in our store! International shipping costs on request!

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Interface Connections Fodpfezf D Rnox Ad Iepi Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Condition: good (used), For sale: professional hospital transport stretcher / medical trolley by Stryker – Prime Series 1125 Zoom model. The device is used in hospitals and emergency departments for patient transport. This model features the Zoom Drive system, which provides electric drive assistance and greatly facilitates patient movement. Manufactured by Stryker Medical USA – one of the world’s leading producers of medical equipment. The stretcher comes with an adjustable backrest, foldable side rails, and integrated braking and steering systems. ⸻ Technical specifications: Fpodpfsyuqt Nsx Ad Isi • Manufacturer: Stryker Medical • Model: 1125 Prime Series Zoom • Year of manufacture: 2014 • Drive: Zoom Drive – electric assist • Maximum load capacity: 318 kg • Lying surface width: 66 cm • Adjustable backrest • Folding side rails • Central braking system • Transport castors for hospital use

Condition: excellent (used), Original Stryker Stair-Pro stair chair, model 6252, designed for the safe transport of patients up and down stairs. Equipped with a track system that significantly reduces the effort required by rescuers and increases control during descent. Robust aluminum construction, high load capacity (approx. 227 kg), complete set of safety belts, and foldable components for ease of transport and storage. The equipment is fully operational, complete, and in very good visual condition – ready for immediate use. Made in the USA. Ideal for EMS teams, fire departments, hospitals, ERs, and nursing homes. Key features: • Model: Stair-Pro 6252 • System: track system (safe stair descent) • Load capacity: up to approx. 227 kg • Construction: lightweight and durable aluminum frame • Safety: securing belts, stable handles • Condition: used, very good, fully functional Fpodpfxex N Idco Ad Iji • Manufacture: Made in USA

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Fpedpfox N Ic Eox Ad Iei

Year of construction: 2016, condition: excellent (used), I am selling a Leica RM2255 in very good condition, after inspection. Fpodpfsvygd Rex Ad Iei

Condition: good (used), For sale: professional transport ventilator Dräger Oxylog 3000 Plus – a device used in emergency medical services, ambulances, and healthcare facilities. Condition: The device powers on and works. The screen is clear, buttons and knobs are operational. Visually, it shows normal signs of use. The casing has minor cosmetic damage, which does not affect functionality or operation. Features: transport ventilation for adults and children; ventilation modes as per the Oxylog 3000 Plus model; adjustable breathing parameters; clear display with alarms. Included: Dräger Oxylog 3000 Plus ventilator, carrying bag, cables and connectors as shown in the photos. Additional information: used medical equipment; sold exactly as shown in the pictures; ideal as a backup transport ventilator for an ambulance, hospital, or technical unit. Fedpfx Ajx Tuyxod Ijpi

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. • Clear display with parameter overview • Safety alarms Technical condition: • Used device Fpjdpfx Aex N Icxsd Iji • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.