Condition: used, ZG2-WDS22, OMRON, sensor head, L=2m Duobovrggvjvaiy Iot Model: ZG2-WDS22 Condition: Used Note on condition: Cable has been repaired (Hellermann insulation)

Condition: excellent (used), Functionality: fully functional, Marposs control electronic measuring device for grinding machines Dsbvaiewfm Ewjy Iout

Condition: as good as new (ex-display), Year of construction: 2024, consisting of: ᐳ Stop rail 2 m long ᐳ 2 pieces complete stops ᐳ 1 piece measuring scale right ᐳ left ᐳ 1 piece measuring scale left ᐳ right ᐳ Mounting screws Dobvaiyofrnpne Ieut - The delivery does not include the wooden base strip 50 x 45 mm, onto which the stop rail is screwed.

Condition: excellent (used), Zwick Roell Type: Z100 TEW Technical Data Item No.: 1004501 Duebowcqrpjvaiy Iet Test force Fmax: 100 kN Test Chamber Test chamber height: Total height: 1934 mm Height of lower test chamber, without fixtures: 1755 mm Height of upper test chamber, without fixtures (additional crosshead required): 1800 mm Test chamber width: 640 mm Load frame Load frame height: Height without support profiles: 2169 mm Height with support profiles: 2284 ... 3094 mm Load frame width: Width without support profiles: 960 mm Width with support profiles: 1136 mm Width with support profiles and machine electronics: 1329 mm Load frame depth: Depth: 140 mm Depth without Stand profiles, with drive base: 584 mm Depth with stand profiles: 781 mm Weight: with machine electronics without stand profiles, approx.: 470 kg optional stand profiles (one pair), approx.: 34 kg with typical fixtures, approx.: 570 kg Installation area: pure footprint: 0.01 m2 Load frame footprint: 0.867 m2 Specific floor load: based on typical fixtures: 559 kN/m2 with 50% safety: 839 kN/m2 Ceiling load: based on typical fixtures: 6 kN/m2 with 50% safety: 9 kN/m2 Paint finish: RAL 7021 and RAL 7038 Ambient temperature: +10 ... +35 °C Relative humidity (non-condensing): 20 ... 90% Average sound pressure level At vmax measured at a distance of 1 m from the front of the machine: 66 dB(A) Drive Crosshead speed vmin ... vmax 0.0001 ... 1500 mm/min Crosshead return speed, max.: 2500 mm/min Deviation from the set drive speed, max.: 0.05% of vact Drive travel resolution: 0.484471 nm Positioning repeatability (without direction reversal): ±2.0 μm Controller: adaptive Remote control testControl II Safety device Force transducer 100 kN Type: Xforce K Hydraulic power unit Height: 584 mm Width: 502 mm Depth: 817 mm Hydraulic specimen holder Max. test force (Fmax): 70 kN Max. clamping force (at 300 bar): 110 kN The hydraulic specimen grips are designed for tensile, compression, and alternating load tests (static, tensile, pulsating) and are suitable for the following applications: Application Area - Specimen Material: Ferrous and non-ferrous metals, structural sheets, sintered metal materials, hard metals, metal-ceramic composites, hard and reinforced plastics, composite materials, similar materials - Specimen Shape: Flat specimens, round specimens (strips and shoulder specimens), especially small specimens with short clamping lengths - Loading Type: Tensile, compression, alternating load MakroXtens Extensometer Drag Force: ≤ 0.05 N Clamping Force of the Sensor, Manually Adjustable: 0.1 ... 2 N Resolution in conjunction with: 300 mm lever arm length: 0.006 μm 450 mm lever arm length: 0.009 μm 600 mm lever arm length: 0.012 μm Maximum initial gauge length: up to 100 mm Maximum sample width: 60 mm Maximum sample thickness/diameter: 30 mm Dimensions: Height: 375 mm Width: 167 mm Depth: 375 mm Test software: testXpert 3 v1.2 Year of manufacture: 2018 Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, operating hours: 50 h, Functionality: fully functional, type of input current: AC, overall weight: 7 kg, outer dimension length: 223 mm, outer dimension width: 172 mm, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, The Datacolor® 200R delivers reliable and easy-to-use color measurements for paint and coating applications. The instrument is fully backward compatible with the existing Datacolor 110, making it a seamless complement or replacement. Duebvaiyowff S Nj Ijt Designed specifically for use in paint retail, it features a compact, modern design for plug-and-play operation. Calibration is required less frequently, allowing for longer uptime. Thanks to the new service indicator light, you can have even greater confidence in your measurements. Confidence in Measurements Laboratory-Accurate Measurements Prevent Errors and Save Time and Money The Datacolor 200R utilizes the patented SP2000 spectral analyzer to provide paint retailers with laboratory-accurate color measurements. This enables paint retailers to achieve the same high-quality color matches expected from a color laboratory in their stores, saving time and money on color corrections. Spherical geometry with automatic gloss trap With the sphere geometry of the Datacolor 200R, color measurements can be performed on both smooth and textured samples. Automatic gloss compensation thus guarantees perfect color matching. Significantly reduced calibration frequency ensures longer uptime When customers are waiting in the salesroom, there simply isn't time to calibrate the instrument. The calibration of the Datacolor 200R is retained for up to two weeks, maximizing your shop's productivity without any loss of accuracy.

Year of construction: 2017, Condition: good (used), - Standard deviations: 0.01 g/l - In good condition Dobvaiyowff A Ie Ieut

Condition: used, DUM4-11.4-24I.R4-76Q, Promess, servo motor Duebvaiour U T Tsy Iet Model: DUM4-11.4-24I.R4-76Q Condition: Used

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 30 h, Functionality: fully functional, Scanner it is in very good condition, it was used only occasionally.All the details is on attached brochure. Dusbvot Uc Aneaiy Ist Price is without VAT for company from EU except Romania and non EU company and private people where we add 19% on invoice.

Condition: excellent (used), Vötsch Type: VC 7034 Climatic Test Chamber with Humidity and Air-Cooled Touch Panel Powerful 32-bit Control, Monitoring, and Regulation System Technical Description: Characteristics for Temperature Tests: Temperature Range -70°C to +180°C Temperature Deviation in Steady State according to IEC 60068-3-5, depending on the test chamber temperature temporally ±0.1 to ±0.5 K spatially ±0.5 to ±2.0 K Temperature Rate of Change according to IEC 60068-3-5 Heating: approx. 3 K/min. Cooling: approx. 2 K/min. Heat compensation max. approx. 1000W Characteristics for climatic tests: Temperature range +10°C to +95°C Temperature deviation in steady state according to IEC 60068-3-5 depending on the test room temperature temporally ±0.1 to ±0.3 K spatially ±0.5 to ±1.0 K Distance between measuring points and wall: 100 mm Humidity range 10% to 98% RH Dew point range -3°C to +94°C Dobvowck Dljaiy Ieut Humidity deviation in steady state, depending on the climatic value temporally ±1.0% RH to ±3.0% RH Heat compensation 400W at 25°C to 90°C Humidity up to max. 90% RH F. is maintained Data for installation and operation: Test chamber: Width 580 mm, Depth 765 mm, Height 750 mm Housing (installation dimensions): Width 865 mm, Depth 1595 mm, Height 1780 mm Penetrations 1 50 mm diameter penetration installed on the left 1 125 mm diameter penetration installed on the right Test chamber volume: approx. 335 liters Refrigerant R-452a + R23 Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 5.9 kW Nominal current approx. 12.0 A (neutral conductor loaded) Fuse protection 16 A slow-blow, on-site Weight approx. 500 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: as good as new (ex-display), KT 638-3, adaptronic test technology, high voltage tester Model: 0KT 638-3 Duobjur R Hcsvaiy Ist Condition: As good as new

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent Dujbevb E Uqevaiy Iot The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, S/N: 6201330874, MN7464H, Anritsu Filter Unit4 Dusbvaiyjq S Sgcj Iet Model: MN7464H Condition: Used

Condition: used, VT 7012 S2, VÖTSCH temperature shock test chamber Model: VT 7012 S2 Condition: Used Duebopvi Eaevaiy Ijt

Condition: used, SPIRENT SR5058L Test Configuration Unit SR 5058L Model: SR5058L Debveq S Srvjaiy Isut Condition: Used

Condition: used, C20333308217 LP, SPD-10A, Shimadzu, UV-VIS detector Duobvoutclmoaiy Iot Model: C20333308217 LP Type: SPD-10A Condition: Used Note on condition: incomplete, connection screw for hose missing

Condition: new, VHX-S15CE, Keyence 3D Automatic Measurement Unit (Control Unit) - New Dusboq S Ti Tovaiy Ist Model: VHX-S15CE Type: VHX-S15CE Condition: New

Condition: new, 573346, SFAM-90-5000L-M-2SA-M12, Festo, flow sensor Model: 573346 Type: SFAM-90-5000L-M-2SA-M12 Dujbvaevrgtcsiy Iot Condition: New

Condition: used, 564938, SFAM-62-5000L-M-2SA-M12, Festo, flow sensor Dsbvsvrgq Ieaiy Iout Model: 564938 Type: SFAM-62-5000L-M-2SA-M12 Condition: Used

Condition: used, 610331, DIG 58B-2500-AB-I05-SC8-D78, Wolke, rotary encoder, left, Type B Model: 610331 Dobvaovrhnhjiy Iout Type: DIG 58B-2500-AB-I05-SC8-D78 Condition: Used

Condition: new, F201CV-2K0-PGD-88-V, Bronkhorst, Digital Mass Flow Controller, 2000 sccm H2 Model: F201CV-2K0-PGD-88-V Condition: New Debvajvrg Eloiy Ijut

Condition: used, EL-FLOW Select F-201CV, 100 sccm SiH4, Bronkhorst High-Tech BV, Digital Mass Flow Controller Duobvaoq S Ub Ssiy Iet Model: F-201CV Condition: Used

Condition: new, VHX-600E, Keyence Digital Microscope - New Duobvaijq S Ti Eey Iot Model: VHX-600E Type: VHX-600E Condition: New

Condition: new, 540-201, T-Guard2 sensor, INFICON, leak tester Dujbvaijutb N Dey Ist Model: 540-201 Type: T-Guard2 sensor Condition: New

Condition: used, C2410121, Vertex 320, Micro-Vu, CNC multi-sensor measuring system, with base Dusbot H I Umovaiy Ijt Model: C2410121 Type: Vertex 320 Condition: Used

Condition: used, E5515C, 8960 Series 10, Agilent Technologies Wireless Communications Test Set + Options S/N: GB47390265 Model: E5515C Dusbvaiyjq S Svkj Iot Condition: Used