Used Heavy duty trailer for sale (107)

Condition: good (used), Year of construction: 2022, load capacity: 36,000 kg, machine/vehicle number: 2696, Seacom SEACOM SH36XT from Uniktruck Gsdpfx Asqxc Tvefijkc

Condition: new, functionality: fully functional, overall weight: 18,100 kg, empty load weight: 2,100 kg, maximum load weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, wheelbase: 5,000 mm, color: orange, Year of construction: 2025, machine/vehicle number: 0681, Equipment: center pivot plate, The TPW 16 VL - LK has a payload capacity of 16,000 kg on the loading platform at 6 km/h. The dimensions are 5,000 mm long, 2,000 mm wide, and approximately 640 mm high. It features a turntable steering system on the front axle and a rigid trailing axle. The drawbar is equipped with a drop safety device, and the forged towing eye has a 40 mm bore. Heavy-duty banded tires 425 x 150-305 are fitted as twin wheels on steel rims and sealed on both sides with tapered roller bearings using a Nilos ring. For safety, four welded-on lashing brackets are fitted to the longitudinal sides (for load securing), and a double-acting wheel chock is mounted on the frame. The paint finish is yellow-orange RAL 2000. The transport floor is made of 30 mm tongue-and-groove boards, countersunk and bolted. Gkjdpfxercfz To Afioc

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 228983 / 228982/1, Sale only within EU member states! Not a private sale. The MAE is available for inspection. Gsdpfxjwkrlme Afiekc We accept no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. We accept no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm Gedpfew I Hqwjx Afiekc - Tire dimensions approx. 425 x 260 mm

Condition: like new (used), Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. The trailer components are not designed for combined journeys with several trailers. Payload: 10 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Loading area: Size approx. 4000×2500 mm, loading height approx. 665 mm, loading area cover with softwood planks, all-round edge protection. Base frame: Sturdy welded construction made of sectional steel. Steering: Four-wheel Ackermann steering, drawbar can be raised, removed and repositioned from front to rear. Suspension height on towing vehicle approx. 350 - 600 mm (other suspension heights are only permitted after notification), towing eye in accordance with DIN 74054, dm 40 mm, drawbar safety device in accordance with UVV. Chassis: Both axles steered, super-elastic tires 21×8-9 approx. 517×186 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Gjdpfxeuf N R Ss Afiskc Paint finish: Top coat RAL 5002 ultramarine blue

Condition: new, 16000 kg length 6000 mm width 2500 mm loading area height 700 mm Heavy-duty trailer - industrial trailer - Made in Germany - Available immediately from stock Frame: - Frame made of stable profile steel - Platform made of impregnated softwood - Protected all around with a steel edge, statically designed - 6 lashing rings welded on Gjdpfx Aohrrp Rsfijkc Steering: - The steering takes place via 2 axles with Ackermann steering - the steering drawbar is removable and can be hooked in on both sides - Steering angle approx. 42° - all rotating parts are with maintenance-free slide bearings (lubricated for life) Equipped with ball bearings - Towing eye: 40 mm Ø with wear ring - Fork support height adjustment for better coupling to the towing vehicle Wheels - the trailer is equipped with 4 heavy-duty wheels with elastic rubber covering Ø425mm, total width 300mm and ball bearings.

Condition: good (used), operation weight: 6,200 kg, Year of construction: 2009, total length: 10,500 mm, total width: 1,970 mm, lifting height: 330 mm, load capacity: 40,000 kg, machine/vehicle number: 1539, Equipment: lighting, Liftec H40 from Uniktruck Gksdpfx Afew Nbmveisc

Condition: new, functionality: fully functional, overall weight: 22,000 kg, empty load weight: 2,000 kg, maximum load weight: 20,000 kg, axle configuration: 2 axles, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 640 mm, first registration: 08/2025, next inspection (TÜV): 08/2026, tire size: 450x300, Year of construction: 2025, Heavy-duty industrial transport trolley with a payload of 20,000 kg on the loading platform at 6 km/h Dimensions: 3000 x 2000 x 640 mm Tyres: Solid rubber 450 x 300 on steel rim with double-sided tapered roller bearing Steering: All-wheel steering with adjustable track and tie rods Gkedpjw Rlvkjfx Afioc Transport floor: 40 mm Douglas fir, countersunk and bolted Tow bar: 1600 mm with fall protection and 40 mm towing eye Paint finish: RAL 2000

Condition: used, Platform transport trailer, heavy-duty trailer Industrial trailer with 2-axle turntable steering Manufacturer: PLAN, type 11 Chassis no.: 31361-1 = year of construction 03/2015 Chassis no.: 31361-2 = year of construction 03/2015 Payload 20000 kg Unladen weight approx. 3760 kg Gross vehicle weight 23760 kg Platform height 850 mm Platform length 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width 2500 mm Tires Ø 559 x 300 mm (solid rubber tires 559/305-406.4) - 4 wheels with 2-axle turntable steering - track-running - Reversible drawbar, drawbar can be bolted to the front or rear - Drawbar with drawbar eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beam Height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checker plate - Tarpaulin body with steel base frame, can be loaded from the side Max. transport height 2300 mm under tarpaulin Length for transportation 610 cm (with drawbar folded up) Width for transportation 250 cm Height for transport 330 cm (with tarpaulin body) Gsdoiiumropfx Afiekc Weight per trailer approx. 3760 kg Good condition 2 pieces available Price per trailer

Condition: like new (used), Operating conditions: Godpfx Afsuf Rwysiekc The trailer is designed for use on level and paved roads in internal traffic. Towing vehicle with type designation: unknown Transported goods: unknown Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 40t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 5000 x 2400 mm, loading height 930 mm, loading area cover with wooden planks, all-round edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 670 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles (2 steered axle lines) to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 305mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: 2 lashing rods in each of the long sides For hire or sale EU-wide.

Condition: good (used), Year of construction: 2022, load capacity: 36,000 kg, machine/vehicle number: 2697, Seacom SEACOM SH36XT from Uniktruck Gedew Nbnyspfx Afiokc

Condition: new, functionality: fully functional, maximum load weight: 40,000 kg, loading space length: 4,000 mm, loading space width: 2,200 mm, loading space height: 780 mm, tire size: 405x260, Year of construction: 2025, machine/vehicle number: 0684, Transport Cart TPW 40 AL-PA-AW Type: TPW 40 AL-PA-AW Serial No.: 0684 Year of manufacture: 2025 Payload: 40,000 kg on 60% of the loading area at 6 km/h Dimensions: Loading area length: 4000 mm Width: 2200 mm Height: approx. 760 mm Steering: All-wheel steering with oscillating axle and axle rocker Tyres: 16 heavy-duty wheels 405-260 Towing drawbar: Drawbar length 1800 mm with safety latch and towing eye according to DIN for 40 mm pin Paint finish: RAL 2000 Gkodofxgxnopfx Afisc Transport floor: 50 mm Douglas fir/larch, countersunk and bolted into the frame #HeavyDutyTransport #In-plantTransportSystems #HeavyDutyTrailer6-100Ton #HeavyDutyTrailer3to100Ton #HeavyDutyTransportPlatformCart #PlatformHeavyDutyTrailer #AllWheelSteering #TransportCart

Condition: excellent (used), Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 32 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Loading area: Size approx. 10,000×2400 mm, loading height approx. 975 mm, loading area cover with softwood plank, all-round edge protection. Steering: Front turntable steering, drawbar can be raised and removed, attachment height on towing vehicle approx. 350-500 mm, towing eye in accordance with DIN 74054, dm 40 mm, drawbar safety catch in accordance with UVV. Chassis: 2 steered and 2 unsteered pendulum axles, wheels with elastic solid rubber tires approx. 450 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Gksdpfouf Smiex Afijc Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: 2 lashing rods made of round steel welded horizontally into the outer beams on both long sides.

Condition: good (used), operation weight: 2,700 kg, Year of construction: 2022, total length: 4,360 mm, total width: 1,670 mm, load capacity: 25,000 kg, machine/vehicle number: 2903, Seacom SEACOM GSH25 from Uniktruck Godpfxewmggqs Afiokc

Condition: excellent (used), OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Gkodpfx Afouf N Dfeioc Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. Payload: 6 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 4100 x 2100 mm, load height approx. 560 mm, with screen printing plates Deflectors on the front sides of the frame Steering: Four-wheel Ackermann steering, drawbar can be raised, cannot be repositioned or removed, Drawbar safety device according to UVV Chassis: Both axles steered, wheels with solid rubber tires approx. 425 x 150 mm, wheel hubs with tapered roller bearings and tapered roller bearings and permanent grease lubrication Paint finish: Top coat RAL 5002 ultramarine blue Miscellaneous: - Collision protection on the frame ends made of drop-shaped half shells. - All-round anti-slip protection approx. 25 mm high - Side underride guard at diagonal bar height - Pin coupling with captive pin, pin spring-loaded Dm 30, on the rear side - Double-acting wheel chock with chain - Two reflectors at the rear - prepared for roof mounting

Condition: good (used), operation weight: 12,600 kg, Year of construction: 2012, total length: 14,850 mm, total width: 2,230 mm, load capacity: 90,000 kg, machine/vehicle number: 3046, Liftec LTH90 from Uniktruck Gksdpeul Dr Sefx Afioc

Condition: excellent (used), OPTIONALLY ALSO AVAILABLE WITH ROOF STRUCTURE! Operating conditions: The trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 16 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Loading area: Size approx. 6000 x 2400 mm, loading height approx. 670 mm, loading area cover with softwood planks, all-round edge protection Steering: Four-wheel Ackermann steering, drawbar can be raised, removed and reversed from front to rear, suspension height on towing vehicle approx. 320 mm (other suspension heights are only permitted after notification), towing eye in accordance with DIN 74054, dm 40 mm, drawbar safety catch in accordance with UVV Chassis: Both axles steered, elastic solid rubber tires approx. 425 x 300 mm, wheel hubs with tapered roller bearings and permanent grease lubrication Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: Gkjdpfx Asuf N Evefijc - 2 lashing rods made of round steel welded vertically into the outer beams on both long sides - Double-acting wheel chock with bracket and chain

Condition: good (used), operation weight: 12,500 kg, Year of construction: 1999, total length: 14,700 mm, total width: 2,460 mm, load capacity: 90,000 kg, machine/vehicle number: 2839, Liftec LTH90 from Uniktruck Gkjdpfx Aeqxc T Iefijc

Condition: excellent (used), Operating conditions: The industrial trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: The industrial trailer can be used to move loads up to a maximum of 25 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: The base frame of the industrial trailer consists of a stable welded construction made of sectional steel. Loading area: The size is approx. 6000 x 2400 mm. The loading height is approx. 750 mm. The loading area is covered with softwood planks and edged with all-round edge protection. Steering: Four-wheel Ackermann steering, drawbar can be raised, removed and repositioned from front to rear, attachment height on towing vehicle approx. 285 - 775 mm (other attachment heights are only permitted after notification), towing eye in accordance with DIN 74054, dm 40 mm, drawbar safety catch in accordance with UVV Chassis: The two axles of the industrial trailer are steered. Elastic solid rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and permanent grease lubrication Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: 2 lashing rods made of round steel are welded vertically into the outer beams on each of the two long sides of the industrial trailer. Gkodpfx Afsuf Rt Ujijc For hire or sale throughout the EU.

Condition: good (used), operation weight: 2,700 kg, Year of construction: 2023, total length: 4,360 mm, total width: 1,670 mm, load capacity: 25,000 kg, machine/vehicle number: 2863, Seacom SEACOM GSH25 from Uniktruck Gedpfx Aewmgf Hefiokc

Condition: like new (used), Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Gsdpfjuf Rw Tsx Afiekc Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: good (used), operation weight: 2,500 kg, Year of construction: 2020, load capacity: 45,000 kg, machine/vehicle number: 2095, Seacom SEACOM SH45XT from Uniktruck Gjdpew Nbngjfx Afiokc

Condition: like new (used), Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 10000 x 3000 mm, loading height approx. 1105 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV. Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue For hire or sale EU-wide. Gsdpfouf Snyex Afijkc

Condition: good (used), Year of construction: 2017, total length: 12,000 mm, total width: 2,680 mm, load capacity: 120,000 kg, machine/vehicle number: 2435, Liftec 120R-12000 from Uniktruck Godpfjquwg Eox Afiskc

Condition: good (used), operation weight: 12,500 kg, Year of construction: 2007, total length: 14,700 mm, total width: 2,460 mm, load capacity: 90,000 kg, machine/vehicle number: 3514, Liftec LTH90 from Uniktruck Gjdpfxjxb Ehmj Afijkc