Used Heavy Duty Caster Wheels for sale (25,250)

Condition: good (used), Current stock: approx. 400 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Wicke Type: 01 material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 100 mm Rollers Ø: approx. 80 mm roller width: approx. 35 mm Tire material: PA6 Itjdpshmuylsfx Afien plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,556 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), heavy-duty castors, heavy-duty wheels, tires, forklift drive wheels -Manufacturer: Wicke- Topthane heavy-duty wheel -Wheel size: Ø 230 x 90 mm -Bolt circle: Ø 95/13 mm -Price: per piece -Quantity: 2 pieces Itsdpsf A Slusfx Afijn -Weight: 7.5 kg/piece

Condition: good (used), Current stock: approx. 370 pcs. Included in delivery: 01x fixed castor, used Manufacturer: Wicke material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 150 mm Rollers Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: polyamide plate dim.: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,745 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. Iedpfjhmux Ijx Afistn - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 53 pcs. Included in delivery: 01x fixed castor, used Manufacturer: Wicke type: 01 material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 100 mm Rollers Ø: approx. 80 mm roller width: approx. 35 mm Tire material: PA6 plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Itedpfxshmuxvs Afien Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,370 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 46 pcs. Included in delivery: 01x fixed castor, used Manufacturer: TENTE material color castor: grey material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Itjdpfx Aehmuydefion Roll width: approx. 32 mm Roll material: PP + TPE ← PA6 + PUR Plate dim.: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,57 kg

Condition: good (used), Current stock: approx. 350 pcs. Included in delivery: 01x fixed castor, used material color castor: black Iedjhmuyaspfx Afiotn Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: solid rubber Material rim: polypropylene plate dim.: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pc.: approx. 0,803 kg

Condition: good (used), Current stock: approx. 140 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Wicke Type: L03 Material color castor: cream white material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm Itsdpfx Aehmuytsfisn roller width: approx. 40 mm Tire material: PA6 plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 60 mm (center - center hole) Weight / pcs: approx. 0,837 kg Advantages to PA wheels: - PA wheels are very low wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Current stock: approx. 965 pcs. Included in delivery: 01x swivel castor, used Manufacturer: Kama Material color castor: red Material color frame: sendz. galvanized Technical data: Total height: approx. 155 mm Rollers Ø: approx. 125 mm roller width: approx. 34 mm Bearing: needle bearing Roller material: rubber plate dim.: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( oval ) Number of holes: 4 pcs. Screw hole distance: approx. 80 x 55 mm (center - center hole) Weight / pcs: approx. 0,970 kg General information about the article: Itedpjhmuyzjfx Afien This item is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Isdpfxsv D Uhfe Afijtn Highly automated ≤2m workpieces are unloaded through servo flaps

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Itjdpfjwhylvox Afien Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, axle configuration: 3 axles, first registration: 01/2009, color: other, Year of construction: 2009, Empty weight: 9.040 kg Ijdpfx Aew Rfb Hjfietn Axle 1: left 8 mm right 8 mm Axle 2: left 10 mm right 10mm Axle 3: left 10 mm right 10 mm

Condition: used, Price: On request - Drive system: Conventional - Power [kW]: 8.0 - Number of axes [pcs]: 3 - Documentation available: No Itodpfxewniypj Afion - Motor power: 8.0kW Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Allen Bradley 1333-MOD-KB4 Heavy Duty Dynamic Braking Unit , unused in original box, 100% functional Isdpfx Afsi D Tzajiotn

Condition: used, Diesel - forklift truck, compact forklift MORA type M80CS make no. 20087 year of construction 2006 Rated capacity 8 ton. Lifting height 3800 mm fork length 1800 mm fork carriage width 1460 mm overall height 3030 mm Total width 1460 mm Total length without forks 3350 mm Dead weight 12740 kg - Duplex mast with 1950 mm free stroke - 4 cylinder PERKINS diesel engine - completely closed cab with heating - electro-hydraulic tipping device for the driver's cab - hydraulic auxiliary steering - 2 pieces working lights in front, 1 piece working light in the rear - yellow warning-flashing light on the protective roof - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read off - UVV-TÜV acceptance new good condition Iodoitv Rdepfx Afijtn Renting on request

Condition: ready for operation (used), throat depth: 1,100 mm, Heavy duty double column bandsaw sawing cap: dia 1100 mm autofeed with stroke of 500 mm (with unlimited repositioning) enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: Iedpfxoxpggae Afietn - 6 meter in-feed rollerconveyor (outside) with 1 manual clamp for aligning workpiece - 3 meter in-feed rollerconveyor (inside) with 2 manual clamps for aligning workpiece - max workpiece width: 1100 mm - each roll is motorized - cap of one roll is 4 ton - 2 meter out-feed rollerconveyor - one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 1100 mm Length of band saw: 11400 x 67 x 1,6 mm

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition Itedpfxoxn Tz Ie Afijn

Condition: good (used), 19 heavy-duty conveyor rollers 238 mm Ø x 600 mm roller shell length with 40 mm Ø shaft and 2 pedestal bearings, with chain wheel 16 B1/Z= 17, 1 geared motor drive with fluid coupling, if required also 6 spiral rollers for right-hand discharge 238/266 mm Ø x 900 mm Iodpfx Aewb A Hvjfiotn

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Itodpfx Ajh U Rzgsfien SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 50, laser power: 20,000 W, pipe diameter (max.): 20 mm, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, power: 20 kW (27.19 HP), total length: 260,000 mm, warranty duration: 60 months, cutting height (max.): 360 mm, working range: 360 mm, HSG TX3R Professional heavy-duty tube laser cutting machine 6000W-20000W Model: TX3R Power: 6000W-20000W X/Y-axis Positioning Accuracy: ±0.05mm/m Iedpfxertiins Afistn Cutting Capacity of Round Tube: Φ20-Φ360mm Cutting Capacity of Square Tube: □20*20-□360*360mm Weight of Single Tube: 1200kg

Condition: new, power: 382 kW (519.37 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Isdewmh Hropfx Afistn Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) Itjdpfx Afsxpgggsien sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Weight: 8,5 ton (only machine)

Condition: used, The machine is built from thick steel, mounted on a sturdy stand, and fully mechanical — no power required. Perfect for workshops, garages, or metal fabrication environments. Details: Manual operation with long lever for easy cutting Stable steel frame and stand included Itedpfx Afexpmr Neion Industrial construction – built to last Suitable for cutting sheet metal, aluminum, or similar materials

Condition: used, mileage: 329,000 km, power: 368 kW (500.34 HP), first registration: 09/2018, fuel type: diesel, color: red, axle configuration: 3 axles, brakes: retarder, gearing type: mechanical, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, MAN 33.500 TG Number of axles: 3, Configuration: 6x4, Unladen weight: 10,200 kg, Total tank capacity: 390 liters, Cruise control, Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Red, Engine power: 368 kW (493 hp), Fuel: Diesel, Transmission type: Manual, ABS, ASR, Central locking, Itodpfx Afow U Il Nsion Retarder

Condition: good (used), Year of construction: 2006, Puma 700M 2006 Itsdpfx Aexpdrtofien Doosan Puma 700M CNC Lathe (2006) Controlled axes: 3, X: 470 (450+20)mm, Z: 1650mm, C: 360(0.001)gr Tools in revolver: 12 (BMT85) Spindle RPM: 3-1500, Rotating tools RPM: 30-3000 Automatic door Weight: 16,100 kg Note that this lot is located at Braås, Sweden

Condition: new, Year of construction: 2025, machine/vehicle number: 50, laser power: 12,000 W, cutting speed: 100 mm/min, workpiece weight (max.): 1,500 kg, total length: 120,500 mm, TX3R Ijdpeqk S H Ujfx Afietn Professional heavy-duty tube laser cutting machine 6000W-20000W Model: TX3R Power: 6000W-20000W X/Y-axis Positioning Accuracy: ±0.05mm/m Cutting Capacity of Round Tube: Φ20-Φ360mm Cutting Capacity of Square Tube: □20*20-□360*360mm Weight of Single Tube: 1200kg