Used heavy-duty shelves for sale (230)

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Fgedpjzdcwrofx Akvsf Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: like new (used), like-new, heavy-duty vertical racking system Length: 5.6 m (i.e., 2 x 3.8 m) / Height: 3.3 m with adjustable intermediate shelves. Fgsdpfx Akezcm A Asvsf

Condition: new, Year of construction: 2025, Pallet racking, 2 – 7 m high, crossbeams/traverses available in lengths of 1.80 m / 2.70 m / 3.60 m, 1,000 kg per pallet – Brand New – Fgsdpfou Spu Tex Akvsf Prices ex works / per unit (net)! Sale / Transport from Serbia is only practical if your order volume fills a full or nearly full truckload! Delivery times upon request. CE certification available Frame depth: 1.10 m Frame bracing: bolted Location: Serbia Frames: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Vertical frame 2000*1100 2.00 30.00 €46.50 2 Vertical frame 2500*1100 2.00 37.50 €58.00 3 Vertical frame 3000*1100 2.00 45.00 €70.30 4 Vertical frame 3500*1100 2.00 52.50 €82.70 5 Vertical frame 4000*1100 2.00 60.00 €93.00 6 Vertical frame 4500*1100 2.00 67.50 €105.40 7 Vertical frame 5000*1100 2.00 75.00 €117.75 8 Vertical frame 5500*1100 2.00 82.50 €128.20 9 Vertical frame 6000*1100 2.00 90.00 €140.50 10 Vertical frame 6500*1100 2.00 97.50 €152.90 11 Vertical frame 7000*1100 2.00 105.00 €164.30 Beams: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Beam 150*50*3600 2.50 29.60 €46.00 2 Beam 120*40*2700 2.00 15.50 €24.40 3 Beam 120*40*1850 2.00 11.10 €17.90

Condition: good (used), Hanging shelf system for pallet racking for retrofitting, 200 shelves - second-hand - : Price ex location: 2.950.- € (net)! Manufacturer: Speedcell Type: Picking Ragale Speedcell Storage Year of construction: unknown 2x 2,7m wide Fgjdpfx Ajurya Eekvof 2 units: per unit: 5 hanging racks per row - 4 rows in a row, total of 20 hanging racks with 5 shelves each = 100 shelves per rack. Increase storage density by up to 60 Reduce labor costs by up to 40% Condition: good Available: immediately Location: 45731 Waltrop

Condition: good (used), Year of construction: 2016, 134 units, side protection / frame protection / impact protection / guardrail for pallet racking, single or double rows, Nedcon - used - : Price ex location: €95 / unit (net), dismantled, packaged and loaded! Manufacturer: Nedcon Model: Set Flank protection sigma 135deg Year of manufacture: 2016 / 2019 Type 1 (for single row): 6 units available Side protection sigma 135° L=1100mm Set Flank protection sigma 135deg L=1100 Length: 120cm Height: 40cm Depth: approx. 22cm Weight: approx. 31kg Original price: approx. €205 (net) / unit Type 2 (for double rows): 124 units available Side protection sigma 135° L=2400mm Set Flank protection sigma 135deg L=2400 Length: 243cm Height: 40cm Depth: approx. 22cm Weight: approx. 41kg Original price: approx. €227 (net) / unit Fgedpoy Aixuofx Akvjf Condition: good – very good Available: immediately Location: Augsburg

Condition: excellent (used), Year of construction: 2024, 100 mesh shelves, 1 to. / pallet space, for pallet racking 1.20 m deep - New - : Price per piece from location: 20.- € (net)! Only complete purchase! Manufacturer: MantaMESH Type: MantaMESH Year of manufacture: 2024 Condition: very good Available: immediately Location: 58540 Meinerzhagen ANSI MH 26.2 - 2017 compliant Performance independent of the shelf beams Uniformly distributed load (UDL) (kg) 1000 Permissible deflection (mm) 7.3 Fgedpfx Aettv Tgskvef Load at structural failure (kg) 2000 Characteristics ANSI MH 26.2 - 2017 compliant Made in Germany Pre-galvanized, seamed beams SafeEDGE® on grilles and joists Grille has over 70% open area EU Design Registration No. 002435099-0003 Specifications Beam type Box 50 Box 50 Shelf depth (mm) 1200 Grid depth (mm) 1202 Grid width (mm) 879 Top wire spacing (mm) 25 Bottom wire spacing (mm) 100 Top wire Ø (mm) 4 Bottom wire Ø (mm) 5 Thickness of bottom beams (mm) 1.2 Number of beams 5 Pre-galvanized Pre-galvanized Weight (kg) 12.24 Front side Bending (mm) 30 Bending type External Bending direction downwards Rear side Bend (mm) 30 External bend type Bending direction downwards

Condition: good (used), Year of construction: 2019, Pallet Racking, Nedcon, Height 2.50 – 2.70m, Beam Lengths 3m and 4m, 500kg per pallet, max. 5,600 pallet positions, - used - : Price ex location: only €65,000 (net), dismantled, packed, and loaded, for full purchase including numerous short beams and both short and long end-of-aisle protectors / guard rails (for double and single runs)! Price for partial quantities: Frames: €45 each Beams: 2m: €14 each 3m: €18 each 4m: €22 each Manufacturer: Nedcon Type: Pallet Racking Year of manufacture: 2016 / 2019 Load capacity per pallet: 500kg Number of frames: approx. 900 units Most frames are equipped with upright protectors Fedsw D Ewvopfx Akvogf Frame height: 2.50m and 2.70m Frame depth: approx. 1.10m Beam lengths: 4m min. 624 units (beam height e.g. 12.5cm / support approx. 5cm) 3m min. 518 units (beam height e.g. 8.5cm / support approx. 4cm) Some 1m and 2m also available Condition: good Available: immediately Location: Rhine / Main region, later warehouse in Frankenberg / Saxony

Condition: new, High-quality grid decking with high load capacities, a cost-effective alternative to grid grating – new product – Prices available upon request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (so, for a 2.70m beam, 3 deckings are required = 2,655mm) 1335mm Frame depths: 1.05m 1.10m 1.20m Other depths available upon request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to the standard version): 1,000kg, i.e., also per pallet Grid spacing: 50 x 100 or 25x100mm When making an inquiry, please also specify the type of beam (crossbeam) you have! Fgjdpfeiuvxbjx Akvef I.e., whether it is a box profile (or IPE beam) 50 or 40mm, or whether you have crossbeams with a step. Advantages: no sharp edges 200% safety factor – independent of the shelving beams Tested for permissible deflection and structural failure Wide selection of standard sizes and load capacities MantaMESH is our market-leading wire mesh decking solution. MantaMESH provides assurance with more than 70% open area and a safety factor of 200%, exceeding the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR sprinklers. Compatible with ANSI MH 26.2 - 2007 Made in Germany Pre-welded, hemmed support channels Pre-galvanized finish Maximum deflection independent of the rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of the beam: 1100 mm deep: 2000 kg Mesh has more than 70% open area Example configuration – we would be happy to create a configuration for your application! Depth 1102mm Width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the beams Front: folds out 30mm Rear: folds down 30mm on the outside Item weight 9.43kg

Condition: used, total length: 10,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, frame width: 900 mm, This package includes: 4 x uprights, 4m high x 90cm deep 12 x crossbeams, 330cm each including accessories and grating Results in a single row with 3 bays and 2 levels per bay, total length approximately 10300cm 400m available immediately! Manufacturer: Galler Type: Wide-span shelving Condition: used, good Height: 4 m Length: approx. 1 x 10.30 running meters Frame depth: 0.90 m Construction: Plug-in system Shelf load: 1200 kg per shelf Accessories such as: Floor fixing Connectors Load warning signs Impact protection Guardrails Grated flooring Rear panel grating Depth stops Barrier railings Fgsdpfxozavi Hj Akvjf and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex warehouse. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and non-binding. Subject to prior sale. - Reservation of Ownership: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive sale to commercial enterprises (§ 14 BGB). No warranty for defects in used and IIa goods. The respective manufacturer's warranties apply to new goods.

Condition: used, load capacity per storage section: 4,000 kg, total length: 3,600 mm, This package includes: 1 x IPE120x60 beam, 3,600 mm Manufacturer: SSI Schäfer Type: PR 600 Condition: used, good condition Beam length: 3,600 mm Height: 120 mm Bearing width: 60 mm Color: blue Load capacity: 4,000 kg Accessories such as: Floor mounting Connectors Load warning signs Impact protection Guardrails Fgsdpjzavh Aofx Akvef Grating Rear wall grating Deep stringers Barrier railing and much more... Just ask us! Sales and Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible upon individual agreement. - Offer Status: All offers are subject to change and availability. We reserve the right to sell items prior to confirmation. - Retention of Title: Ownership of the goods remains with us until full payment has been received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, load capacity per storage section: 3,000 kg, total length: 2,700 mm, total height: 100 mm, 1 x Traverse IPE100x50, 2,700mm Condition: used, good condition Traverse length: 2,700mm Height: 100 mm Bearing width: 50 mm Color: green Rated load: 3,000kg Accessories such as: Fgjdpjzavg Eefx Akvsf Floor mounting Connectors Load warning signs Impact protection Guardrails Grating Rear panel grating Deep webs Barrier railings and much more... Just ask us! Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are quoted net ex works. Express delivery via our own fleet is possible after individual consultation. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment (no right of disposal or processing). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: good (used), Frame: 7800*1100*100 mm Cross beams: 3600*130 mm 3600*150 mm If you require shelving units or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used shelving systems and accessories and are happy to assist with your planning. Additional accessories, such as: Frame, corner, and impact protection, push-through protections, chipboard panels, mesh shelves, mesh rear panels, depth supports available. Shipping: Please enquire about freight costs, specifying your postal code, location, and the desired quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale. Fsdpfst N Itbjx Akvogf Subject to technical changes, errors and omissions, and prior sale!

Condition: used, Load capacity: 3200 kg/shelf Crossbars: 3600*140*50 mm 2700*125*50 mm 800 kg/pallet load capacity Frames: 8500*1100*100 mm 7900*1100*120 mm Fgedpfeg Tmvhox Akvef If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/dismantling, purchase/sale Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Condition: good (used), Just beams for sale: Meta 2700*100 mm 2400 kg/level 10 EUR/piece HLF 3300*140 mm 3200 kg/level 12 EUR/piece Hilo (new type) 3100*100 mm 2000 kg/level 11 EUR/piece Dexion P90 3600*100 mm 1400 kg/level Dexion P90 Silverline 2700*125 mm 2400 kg/level If you require racking or accessories in other configurations or designs, please do not hesitate to contact us. We offer a comprehensive range of new and used racking systems and accessories, and will gladly support you with your planning. Further accessories available, for example: Frames, corner and impact protection, load-through safety bars, chipboard panels, mesh shelves, rear mesh panels, depth bars. Shipping: Please enquire about shipping costs, specifying your postcode and location, as well as the desired quantity. Additional services: Planning, racking assembly/disassembly, purchasing/sales. Technical data, information, and prices are subject to change and errors. Intermediate sale reserved! Fedpfx Akeq Tpk Ijvogf

Condition: good (used), Pallet racking system with chipboard decking according to your needs. Frame height, frame depth, beam length is also according to your requirements. Fedpfod Duc Tox Akvogf Send your enquiry and we plan your system accordingly.

Condition: used, Lot of beams and frames for pallet racking 95 frames of 6 m (4 m + 2 m – welded) Frame spacing: 1.10 m Fodpoyg D Taefx Akvjgf Lot of 4 beams of 3 m Lot of 714 beams of 2.7 m Lot of wooden boards, 5 cm thick, suitable for holding paper pallets for printing industry use. To be dismantled on site – 4700 Eupen – Belgium

Condition: like new (used), shelf height: 7,800 mm, Used Meta frames for sale. Frame dimensions: - Length: 7800 mm - Depth: 1100 mm Fsdpfx Akjy Itvzevogf Price per unit: €170 plus VAT. Available: 150 units Racking Systems | Sales • Assembly • Dismantling • Repair | MM Lagertechnik We are happy to provide you with a non-binding offer tailored to your specific needs. Our services include: ✔ Sale of warehouse racking ✔ Assembly and disassembly ✔ Repair and maintenance ✔ Purchase of used racking systems ✔ Racking inspections according to regulations ✔ Training in warehouse technology We support you with the planning, delivery, and professional installation of your storage and operational equipment—reliably and efficiently. With our many years of experience in storage technology, we serve: - Small businesses - Medium-sized companies - Industrial enterprises from various sectors With us, you receive everything from a single source—from planning through to implementation. Note: This listing does not constitute a binding offer. After you contact us, you will receive an individual offer tailored to your requirements.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) Fjdpfxemhhype Akvsgf - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth Fodpfjmhh Dhex Akvogf 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Fgedpfomhh Dzox Akvsf Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever racking with roof support: Hot-dip galvanized bolted system Fgsdpfxsh R Taqe Akvof Scope of delivery: 9 Racking uprights, height 4,230 mm, with base, usable depth 1,200 mm 27 Cantilever arms with 1,200 mm usable depth, with stop 9 Roof supports with 1,500 mm overhang, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,500 mm upright spacing Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms adjustable in height in 100 mm increments - 3 bolt-on cantilever arms with a depth of 1,200 mm, with stop, per upright = 4 storage levels on top of each other - Including longitudinal and diagonal braces with 1,500 mm center distance - Racking length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subsoil must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the condition of the ground, its load-bearing capacity, and any necessary official permits. The racking uprights must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the racking uprights on the top storage level have a minimum overhang of 500 mm from the top edge of the upright.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Fgedpefdkb Tofx Akvjf - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Fjdpfxsmhh Ane Akvsgf Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. Fsdpfx Ajguk A Hskvjgf According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) Fgedpfx Aomhhy Nokvof - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.