Used heavy-duty shelves for sale (235)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing Dedemhh Dhjpfx Ac Hsci - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Dcodpsmhh Dzefx Ac Hsi Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Djdjmhh Anspfx Ac Hsci Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) Dcsdpfxeguk A Hj Ac Hji - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg Dodpfx Acjguk Dks Hsci - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. Dedpfxomhhy No Ac Heci According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Djdomhh Dtspfx Ac Hsci When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system, hot-dip galvanized Scope of supply: 4 rack uprights, height 2,600 mm, with base section 1,000 mm 12 cantilever arms with a depth of 1,000 mm, standard Including longitudinal and diagonal bracing for a 1,300 mm center distance Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with a usable depth of 1,000 mm - Cantilever arms adjustable in height in a 100 mm grid Djdpfx Acoguk Dve Hsci - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for a 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with advance notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsoil must be made of concrete, level, and suitable for anchors, and it must be able to absorb the loads acting on it. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and any necessary official approvals. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the professional association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: used, Crossbars: 2700x120x50 mm, 63 pieces Frames: 5200x1000x95 mm, 17 pieces 4600x1000x90 mm, 4 pieces 2300x1000x95 mm, 2 pieces If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, deep shelf supports. Dcedpfxsh Izr Ue Ac Hoi Shipping: Please request the shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/disassembly, purchase/sale. Changes and errors in technical data, information, and prices, as well as sales subject to prior sale, are reserved!

Condition: used, Nedcon pallet rack approx. 3.1 linear meters, used 🧰 Product Features • Manufacturer: Nedcon • Color: Blue • Condition: Used, see photos • Frames: 2 units pre-assembled, 500 x 105 cm • Frame width: 10 cm • Beams: 8 units with 290 cm clear span • Safety pins: 16 galvanized safety pins • Anchoring: 8 Hilti concrete anchors Dcsdpfx Asy D Nybsc Hei • Load capacity: 2,000 kg per level • Bay load: 12,000 kg • Shelves included! 💰 Price: €440 net excl. VAT • Quantity discount: On request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: Possible at any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, We are offering used pallet racking for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box section: 120 x 50 mm Bay load: 2,400 kg Colour: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: 2 starter bays + 8 extension bays 12 frames 40 beams 160 safety pins Yellow bumper guards (upright protection) can be purchased for €5.00 per piece net. PRICES Net price: €1,115.68 Gross price: €1,327.66 (incl. VAT) Available quantity: 350 m pallet racking Location: 14656 Brieselang – transport can be organized on request YOUR CONTACT PERSONS Tanja Henkelmann Rainer Nürenberg Djdpfxey Dgcmj Ac Hoci Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. Extra costs depend on the destination and shipment volume and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the case of an order. The price stated is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US DLK in Nordhorn specializes in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used pallet racks for sale here. TECHNICAL DATA Frames: 3,000 x 1,100 mm x 70 mm Finish: galvanized Beams: 2,700 mm Box profile: 120 x 50 mm Bay load: 2,400 kg Dcjdpfx Aoy Dga Esc Hji Color: orange Manufacturer: Tegometall Condition: used Scope of delivery: 1 starter bay + 2 add-on bays consisting of: - 4 frames - 12 beams - 2 locking pins The yellow collision protectors (upright protection) can be purchased for €5.00 each (net). PRICES Price: €360.00 net Price: €428.40 incl. VAT Available quantity: 350 m of pallet racking Location: 14656 Brieselang – Transport can be arranged upon request YOUR CONTACTS AT OUR COMPANY Tanja Henkelmann Rainer Nürenberg Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist with transport and assembly of the goods. This item is available for pickup. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and shipment size and can be requested individually from us. PAYMENT TERMS Payment terms are to be arranged in the event of an order. The price stated is per unit/net price or as specified in the item description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products from the fields of intralogistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for commerce, industry, and trades. We continuously offer a range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks for success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), functionality: fully functional, load capacity per storage section: 9,000 kg, total height: 4,400 mm, total width: 2,700 mm, load capacity: 1,800 kg, frame height: 4,400 mm, frame width: 1,100 mm, For sale: a complete set of MGL HX pallet racking – a robust, proven system for standard pallet storage. The ideal solution for operational warehouses, e-commerce, and medium-duty logistics. Goods available immediately – fast delivery with no weeks of waiting. Specification: System: MGL HX Type: Pallet racking Frames: Quantity: 400 pcs Height: 4,400 mm Depth: 1,100 mm Beams: Quantity: 3,000 pcs Length: 2,700 mm Load capacity: 1,800 kg per level Why choose this solution: ✔ Universal height – perfect for most warehouses ✔ Excellent price-performance ratio ✔ Large quantity – suitable for complete facility fit-out ✔ Immediate availability – minimize your warehouse startup time Additionally, we offer: Dismantling and installation Transport across Europe Assistance with warehouse layout planning and optimization Location: Poland Availability: Immediate Dcedpfoywrrysx Ac Hoi Contact: Write or call – we will prepare a configuration tailored specifically to your warehouse.

Condition: excellent (used), Year of construction: 2022, total length: 1,850 mm, total height: 120 mm, load capacity: 3,000 kg, For sale: STOW cross beams in perfect condition, more than 5,000 units available -1850mm -120x50, 3000kg Dcedpfxexprfze Ac Hsi

Condition: ready for operation (used), 4 stands, Height: 4.50 m Width: 1.00 m 8 support beams: 3.90 m 2 support beams: 2.80 m 4 support beams: 2.00 m Dedpfxomgb Ade Ac Hjci

Condition: good (used), Frames: 8860x1050x80 mm, 34 pieces 3000*1050 mm, 7 pieces Crossbars: 1860*75*45 mm (2800 kg/shelf), 352 pieces Dodpfod Hbqnsx Ac Hoci 2760*115*40 mm (2400 kg/shelf), 26 pieces 2700*100*50 mm (2400 kg/shelf), 22 pieces Partial quantities can also be purchased. If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelves, as well as accessories, and we will be happy to assist you with your planning. A customized offer tailored to your specific needs is a matter of course for us. Shipping: Please inquire about the shipping costs, providing your postal code and location, as well as the desired quantity of items.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 162,000 mm, total height: 2,500 mm, shelf height: 2,500 mm, shelf length: 162,000 mm, frame height: 2,500 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 23, 11 double-row and 1 single-row shelving units, Sendzimir galvanized, each with a length of 7.03 m, 2.5 m high, 0.6 m deep, each featuring 7 sections with a clear width of 0.97 m, and 7 shelf levels per section, shelf load capacity of 160 kg. - 184 frames (FR25060), pre-assembled, 2500x600 - 1127 shelves (FB097604), 970x600x40 - 88 connectors for double rows (FBDV-Set) Dcjdpjyy I Enjfx Ac Hoi - 22 double cross bracings (VK2510) - 23 load capacity signs (BSMcP) Frames pre-assembled Shipping / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to site / assembly location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Delivery available throughout Germany mainland, except islands! Deliveries to EU countries upon individual agreement.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0729389557300, load capacity per storage section: 160 kg, total length: 192,000 mm, total height: 2,000 mm, shelf height: 2,000 mm, shelf length: 192,000 mm, frame height: 2,000 mm, load per truss pair (max.): 160 kg, frame width: 600 mm, number of shelf rows: 32, 16 double-row shelving units, Sendzimir-galvanized, each with 6.03 m length, 2 m height, 0.6 m depth, each with 6 sections, 0.97 m clear width per section, each section with 6 shelves, shelf load capacity 160 kg. - 224 frames (FR20060) pre-assembled, 2000x600 - 1152 shelves (FB097604) 970x600x40 - 96 connectors for double rows (FBDV-Set) - 32 double bracing units (VK2010) - 32 load capacity signs (BSMcP) Frames pre-assembled Freight / Delivery: - max. 20 business days after receipt of payment Dodpfx Ajyyvq Soc Hsci - Delivered free to construction/assembly site - Unloading from truck is to be arranged by the buyer with their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement.

Condition: used, 0 . kg dimensions . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Dodpoyycygefx Ac Hjci We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2018, functionality: fully functional, load capacity per storage section: 1,000 kg, total length: 37,030 mm, total height: 4,310 mm, total width: 4,590 mm, shelf height: 4,310 mm, We are offering a used, fully functional flow rack system with a two-level construction (ground floor and upper floor) for sale. This system is perfectly suited for storage and order picking according to the FIFO principle (First In – First Out) and is ideal for logistics, shipping, or manufacturing operations. The racking is optimized for cartons with dimensions of 600 x 400 x 250 mm, accommodating a total of up to 3,000 cartons. Dimensions: The entire system has a total length of approx. 37 m, divided into two sections: one continuous block (approx. 20 m), a staircase section (approx. 1.3 m), and a second block with a walk-through passage (approx. 15.6 m). The total depth is approx. 4.6 m and consists of two racking depths of 1.3 m each, as well as a central service aisle of approx. 2 m. The upright height is approx. 4.3 m; the bottom edge of the intermediate deck (upper floor) is at approx. 2 m, providing sufficient clearance for ergonomic work on the lower level. Configuration and equipment: Each bay is approx. 2.12 m wide (upright width approx. 0.1 m) and contains a total of 10 flow channels – 5 on the lower and 5 on the upper level. Shelf heights are variably adjustable via perforations in the uprights, allowing flexible adaptation to different article sizes. The shelves are equipped with roller conveyors that have a slight incline, ensuring goods and handling units automatically move to the picking side. Access to the upper floor is via an integrated staircase. A central aisle between the rack rows allows loading from the rear and picking from the front. Load capacities (with evenly distributed loads): - Shelf load: 100 kg - Bay load: 1,000 kg - Mezzanine floor: 250 kg/m² Summary of core data: - Total length: 37.03 m - Overall width / depth: 4.59 m - Upright height: 4.31 m - Headroom lower level: approx. 1.98 m - Bay width: 2.12 m - Shelves per bay: 10 (5 lower / 5 upper) - Roller conveyors: yes, inclined (FIFO) - Shelf load: 100 kg - Bay load: 1,000 kg Dedpfxsyxqhve Ac Heci - Mezzanine floor load: 250 kg/m² The system will be dismantled at its current location prior to collection. Inspection possible by appointment. Self-collection required.

Condition: good (used), Gemac shelving system, type Normafix, approximately 1000 meters available. Dimensions: 131 x 120 x 230 cm. Uprights: powder-coated, blue. Shelves: galvanized. Bay width: 1310 mm. Shelf depth: 1200 mm. Shelf height: 2300 mm. Dcsdpfxjgxpqpe Ac Hji 7 shelves per bay. Shelf load capacity: 200 kg. Bay load capacity: 1400 kg. Approximately 750 units available. The price refers to: 13.10 meters. 22 uprights. 70 shelves. Includes securing and fastening materials.

Condition: used, total length: 39,900 mm, total height: 3,000 mm, shelf height: 3,000 mm, support length: 2,700 mm, Included in this package: 15 uprights, each 3,000mm x 1,100mm (blue) 56 beams, each 2,700mm (yellow) 112 safety pins This results in a racking row with 14 bays, each with 2 levels plus floor pallet position = total of 126 pallet spaces (1,000kg per pallet) Approx. 800 uprights and 4,500 beams are available for this system. Please contact us for details. Manufacturer: Jungheinrich Type: MPB Condition: used, good condition Height: 3,000 mm Length: approx. 39.90 meters Rack depth: 1,100 mm Dcodeyvr U Ejpfx Ac Hji Bracing: bolted Beam length: 2,700 mm Compartment load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 126 Accessories such as: Floor fixings Connectors Load notices Impact protectors Guard rails Grating panels Rear mesh panels Support bars Safety barriers ...and much more. Simply ask us for your requirements! "Benefit from over 20 years of industry experience – we provide expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are net ex location. Express delivery with our own fleet possible by arrangement. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our unrestricted property until full payment is received (no processing or disposal before settlement). - Warranty: Exclusive sales to businesses (§14 German Civil Code). No liability for material defects with used and grade II goods. Manufacturer warranties apply to new goods.

Condition: used, Included in this package: Djdpfxoyvr Swo Ac Hsci 1 x upright 11,750 mm x 1,100 mm (galvanized) (The uprights can be cut to any height—just ask us) Available from Berlin or Neuwied For this system, 400 uprights and 2,800 beams are available. Please contact us for more information. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition Height: 11,750 mm Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Bay load: 11,750 kg with a buckling length of 235 cm Accessories such as: - Floor fixings - Connectors - Load warning signs - Impact protection guards - Safety barriers - Wire mesh shelves - Back mesh panels - Depth bars - Boundary railings And much more... Just ask! "Benefit from over 20 years of industry experience – we offer you expert and personal advice as your specialist dealer for new and used racking systems." Sales & Delivery Terms (B2B) - Prices & Logistics: All prices are net ex location. Express delivery using our own fleet possible by individual arrangement. - Offer status: All offers are subject to change without notice. Intermediate sale expressly reserved. - Retention of title: Goods remain our unrestricted property until full payment has been received (prohibition of disposal and processing). - Warranty: Exclusive sale to commercial customers (§ 14 German Civil Code). For used and surplus stock, liability for material defects is excluded. For new goods, manufacturer warranties apply.

Condition: used, Included in this package: 1 x pallet racking beam 1 x crossbeam, 2,700 mm (orange) 2 x locking pins Available from Berlin or Neuwied There are 400 frames and 3,000 beams available for this system. Feel free to contact us. Manufacturer: Meta Jungheinrich TYP S Condition: used, good condition, some with labels Beam length: 2,700 mm Bay load: 3,000 kg Accessories such as: - Floor fixings - Connectors - Load capacity warning notices - Impact guards - Guard rails - Wire mesh decks - Rear mesh panels - Depth support bars - Safety barriers and much more... Just ask us! "Benefit from over 20 years of industry experience – we provide you with expert and personal advice as your experienced specialist supplier for new and used racking systems." Sales & Delivery Conditions (B2B) Djdpfoyvr Hnsx Ac Hsci - Prices & Logistics: All prices are net ex location. Express delivery via our own fleet available upon request. - Offer status: All offers are non-binding. Subject to prior sale. - Retention of title: Goods remain our sole property until full payment has been received (prohibition of disposal and processing). - Warranty: Sale exclusively to business customers (§ 14 German Civil Code). For used and second-choice goods, liability for material defects is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, Included in this package: 50 uprights, each 11,750mm x 1,100mm (galvanized) (The uprights can be cut to any required height – simply inquire) 396 beams, each 2,700mm (orange) 792 safety pins Available ex Berlin or Neuwied This configuration results in a racking aisle with 49 bays, each with 4 levels plus storage on the floor, providing a total of 743 pallet spaces (900kg per pallet). Additional uprights and beams for this system are also available. Contact us for details. Manufacturer: Meta Jungheinrich Type S Condition: used, good condition, some with labels Height: 11,750 mm Length: approx. 137.30 running meters Rack depth: 1,100 mm Bracing: bolted Beam length: 2,700 mm Maximum shelf load: 2,700 kg Maximum bay load: 11,750 kg Pallet spaces: 743 Dcedpsyvr Edefx Ac Hoi Accessories such as: - Floor anchors - Connectors - Load warning signs - Impact protectors - Guard rails - Grating - Rear mesh panels - Depth bars - Partition railings and much more... Simply contact us for details! "Benefit from over 20 years' industry experience – we provide expert, personalized advice as your specialist dealer for new and used racking systems." Terms & Conditions of Sale and Delivery (B2B) - Prices & Logistics: All prices are net ex works. Express delivery via our own fleet available upon request. - Offer status: All offers are subject to change. Intermediate sale expressly reserved. - Retention of title: The goods remain our sole property until full payment has been received (prohibition of further disposition and processing). - Warranty: Sale is exclusively to commercial customers (§ 14 BGB). For used and IIa goods, liability for material defects is excluded. Manufacturer warranties apply to new goods.