Empresa Remihc Catalunya S.L.

Condition: repair required (used), functionality: not functional, CNC lathe Manufacturer: Okuma Machine Model: LB 25 II Control: OSP TECHNICAL DATA Travel paths: X-axis travel: 300 mm Dedpfjxliviox Aduoku Z-axis travel: 700 mm Spindle speed range: 2200 rpm Spindle motor power: 30/22 kW Tool holder: ASA 11 Number of axes: 2 Travel paths: X-axis travel: 300 mm Z-axis travel: 700 mm Equipment features: 12-position turret Tailstock Chip conveyor Oil mist extraction

Condition: ready for operation (used), Year of construction: 2008, Immediately available ex-stock: CNC Lathe Gildemeister Model CTX 410 Year of manufacture: 2008 CNC control: Heidenhain Plus Turning diameter: 320 mm Turning length: 600 mm Swing diameter: 505 mm Spindle bore: 87 mm Bar capacity: 65 mm Chuck diameter: 250 mm Turret: 10 positions VDI 30 Spindle speeds up to 5,000 rpm Dodpoxld Igsfx Adusku Drive: 21 kW Chip conveyor Coolant unit Documentation Tailstock Weight: 6 t Price: EUR 15,000 – plus VAT ex location.

Condition: ready for operation (used), Year of construction: 2009, Immediately available from site: CNC Lathe Westekemper Type West Turn 1740 NC Year of manufacture 2009 CNC control FAGOR 8055 CNC Swing over bed: 400 mm Swing over cross slide: 235 mm Centre distance: 1000 mm Spindle bore: 86 mm Spindle speeds: 10 – 2000 rpm Drive: 7.5 kW Tailstock: MK 5 Tailstock quill travel: 160 mm Lots of accessories Price: €5,500 plus VAT ex location Dkjdpexld Iaefx Aduju

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Graziano GT400 3-axis CNC lathe Y axis, year 2000 Fanuc CNC with 6 driven tools comes with tooling and documentation Djdpfx Aexhdyhsdueku

Condition: used, Year of construction: 2006, operating hours: 29,199 h, functionality: fully functional, machine/vehicle number: AK0272, Equipment: documentation/manual, - Year of manufacture: 2006 - Fully functional, powered on, ready for demonstration - With driven tools - With sub spindle - Siemens 840 D control - Incl. chip conveyor - Swing diameter over bed: 685 mm - Centre distance: 526 mm - Travel paths: X 240 mm / Z 640 mm / B 520 mm - Rapid traverses (X, Z, B): 18 / 24 / 24 m/min Dkodpfxexgryms Aduju Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 220 mm, turning length: 900 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, spindle motor power: 7,500 W, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, total height: 1,700 mm, total length: 2,495 mm, total width: 1,730 mm, feed length X-axis: 220 mm, feed length Z-axis: 900 mm, workpiece weight (max.): 80 kg, turning diameter over top slide: 220 mm, type of input current: three-phase, overall weight: 1,500 kg, chuck outer diameter: 200 mm, center height: 1,100 mm, mount diameter: 20 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 25 A, warranty duration: 24 months, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT E-200 MC for the manual or cycle-controlled machining of large workpieces The machine is intended for production-oriented users. High chip-cutting power, precision and universality are its characteristic features. The generous workspace allows large workpieces to be machined. The EMCOMAT E-200 MC´s circulating ball screws free of play allow precise axes positioning. The machine can be operated manually with hand wheels or feed keys or, with Sinumerik 828D as cycle-controlled lathe. Therefore, it‘s applicable for the production of single parts or small series. The ‘manual machine’ function on the user interface of the SINUMERIK 828D optimally implements the concept of a controlled conventional lathe. Whether during set-up, programming or machining – the skilled workers’ normal view of the work process is improved. EMCO‘s wide range of options covers everything you need to handle even the most complicated machining projects. - High cutting power - High quality casting with strong ribs for low-vibration machining operations - Fully automatic central lubrication of the X and Z slides and the recirculation ball spindles - Electronic handwheels are available for manual operation of X and Z axis - Made in the Heart of Europe Standard machine equipment:  Hardened linear guides in X and Z axis  Recirculating ball spindles for X and Z axis  Sinumerik 828D with „manual machine“ and and 10,4" LCD monitor  Coolant system  Central lubrication of guides and recirculating ball spindles  Electronic handwheels for X and Z control Dedpfx Adexgi R Njuoku  Machine lighting  Partly covered workspace with sliding chip-stop doors  Loading drawers  Operator tools  User guide and spare parts list  Documentation of the electrical systems  M easure tool  Traverse axes  Set zero offset (ZO)  Turn straight line / circle  D rill, such as centered drilling, centering, deep-hole drilling  Turn, such as stock removal, grooving, thread cutting  Turn contour

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Come with automatic line. Dkedpoxf Iamefx Adueu

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Country of Manufacture: CE - Germany Voltage: 400V/50Hz/3ph Net machine weight: approx. 4,500 kg Year: 2012 Y-axis on upper turret Turret with 16 stations Sub-spindle: 8,000 rpm LNS Express 332 S2 - Year 2012 TECHNICAL SPECIFICATIONS (standard) X1 axis travel: 180 mm X2 axis travel: 195 mm X3 axis travel: 170 mm Z1 axis travel: 340 mm Z2 axis travel: 440 mm Z3 axis travel: 180 mm Dsdjxf A H Iopfx Adusku Y-axis travel: +/-40 mm (option) Y2-axis travel: +40/-25 mm (option) Rapid traverse X/Z/Y: 30/45/15 m/min Accelerations X/Z/Y: 10/10/5 m/s² Measurement system X/Z/Y: Optical scale X, yes Z (option) Y (option) MAIN SPINDLE Spindle motor: Water-cooled Bar capacity: 32 mm (options: 16, 26 or 42 mm) Spindle speed: 6,000 rpm (option: up to 15,000 rpm) Drive power: 12 kW (S1) to 15.5 kW (S1) Spindle nose: DIN 55026 A4 (collet 26-42 mm) Benzinger-Norm (collet 16 mm) C-axis resolution: 0.001° (option) Workpiece clamping: Pneumatic (option: hydraulic) (option: sensitive clamping) SUB-SPINDLE Spindle motor: Water-cooled Bar capacity: 26 mm (option: 16 mm) Spindle speed: 6,000 rpm (option: up to 15,000 rpm) Drive power: 12 kW (S1) / 13 kW (S1) Spindle nose: DIN 55026 A4 (collet 26 mm) Benzinger-Norm (collet 16 mm) C-axis resolution: 0.001° (option) Workpiece clamping: Pneumatic (option: hydraulic) (option: sensitive clamping) TURRET Turret: VDI 25 DIN 69880 Stations: 12 (option: 16) Individual drive: 12 (option: 16 (6,000 rpm)) Coolant tank: 160 L Installed power: 35 KVA Unless otherwise stated, all technical information is provided without obligation or guarantee.

Condition: used, Year of construction: 2002, Max. diameter 430 mm Max. length 600 mm Max. spindle speeds 4000 rpm Max. spindle speed on live tools 4000 rpm X/Z travel - 310/605 mm 2 x 12 station turrets Dksdpfx Adoxfcbfeuju Control: Mazatrol PC Fusion 640 T Equipped with: Various toolholders

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16220C164110, MACHINE DETAILS Operating voltage: 400 V Power: 98 kVA Rated current: 198 A Three-phase current: 400 V Frequency: 50 Hz Dkedjxfaxbopfx Aduju

Condition: excellent (used), Year of construction: 2006, operating hours: 6,650 h, functionality: fully functional, Equipment: documentation/manual, The used HAAS SL 30 THE CNC lathe is a fast, medium-sized, slant-bed numerically controlled lathe equipped with a tailstock, C-axis spindle, and a 12-position powered turret with VDI 40 tooling interface. The configuration also includes a tool presetter, chip conveyor, programmable tailstock body, hydraulic 3-jaw chuck 250mm BB, and fixed toolholders. Dedpjxdvarsfx Adujku Main features: Maximum workpiece diameter: 350 mm Maximum workpiece length: 826 mm Maximum bar diameter: 76 mm Spindle speed: 3,400 rpm Spindle power: 30 HP Year of manufacture: 2006, with only 6,650 spindle hours, CE compliant machine.

Condition: ready for operation (used), spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Harrison M450 Centre Lathe Dkedpfxoxdt Uyj Adusu 60" Between Centres Spindle Speeds 40-2000rpm 12" 4 Jaw Chuck 10" 3 Jaw Chuck Fixed Steady Travelling Steady Coolant P{ump & System

Condition: used, Year of construction: 1994, Turning length 1020 mm Max. turning diameter 410 mm Max. spindle revolutions 3500 rpm X/Z movements 265/1035 mm Number of stations in turret 12 Spindle speeds on rotating tools 2500 rpm. Control: Mazatrol T32-3 Equipped with: Various tool holders Dkodpfx Adexdnn Uoueu

Condition: used, Year of construction: 2001, Turning length 470 mm Dksdoxdfi Nepfx Aduju Max. torning dia. 390 mm Spindle speeds 3500 rpm Movements X/Z - 235/520 mm No of stations in turret 12 pcs. Control: MSG 500 Accessories: Various tool holders

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Type: TNC 42/65 Year of construction: 2001 Dkedpsxc Tt Hofx Adusu Type of control: CNC Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Dedpoxc Trcefx Aduoku Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Number of tool stations: 12 pc

Condition: used, Year of construction: 2008, functionality: fully functional, DOOSAN PUMA 280 LM CHOICE OF TWO MACHINES FOR SALE 2007,2008 TURNING DIA 420 MM MAX TURNING LENGTH 706/1030 76 MM SPINDLE BORE Dkjdpexbgpfjfx Adusu MAX SPINDLE SPEED 3500 RPM 12 STATION TURRET SPINDLE INDEXING C AXIS 0.001 ROTARY TOOL SPEED 5,000 RPM QUILL TAPER 5 MT MAIN SPINDLE 18.5 KW OVER ALL DIMS OF MACHINE NOT INCLUDING BAR FEED 3838 MM LONG X 1670MM WIDE X 1735MM HEIGHT MACHINE WEIGHT 5.9 TON THIS MACHINE WILL COME WITH DRIVEN TOOLING AND A BARFEED

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, swing diameter over bed slide: 445 mm, Sinumerik 840D cnc control main spindle: 3-jaw chuck device sub spindle C-axis driven tools 16-fold revolver chip conveyor Technische Daten: / technical details max. Umlaufdurchmesser über Bett / max. rotary diameter over bed 445 mm X-Weg / X-travel 200 mm Z-Weg / Z-travel 345 mm Drehzahl Hauptspindel / spindle speed main spindle 50-6000 UpM / rpm Drehzahl Gegenspindel / spindle speed sub spindle 5000 UpM / rpm Anzahl der Revolverplätze / number of tool places 16 Eilgang X,Z / rapid feed X,Z 30,30 m/min max. Stangendurchmesser / max. bar diameter 42 mm Gewicht ca. / weight ca. 4050 kg Dkedpfx Adexbcfcsuou Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 84365-U, Well-maintained CNC lathe from screw manufacturing plant Turning length (max.): 510 mm Swing diameter (max.): 254 mm Turning diameter over bed: 440 mm Turning diameter over slide: 250 mm Distance between centers: 680 mm CNC control: Mazatrol CAM T-2 X axis: 180 mm Z axis: 510 mm Maximum workpiece weight: kg Spindle bore: 51 mm Number of turrets: 1 Number of tools: 8 Powered tool stations: Spindle speeds: 4500 rpm Spindle motor power: 15 kW Tailstock: No Dkedpfx Adjw Tt Ndsueu Bar feeder: No ----- Length x Width x Height: 254.0 × 2172.0 × 1790.0 mm Weight:

Condition: used, Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 570 mm, turning length: 600 mm, turning diameter: 470 mm, CTX 400 Dkodsw Tkvhspfx Adusu Heidenhain control

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840Dsl Turning diam. : 430 mm Turning length : 744 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):29 kW Dodpfjw Tg Adox Adujku Torque (max.):250 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop nova Kombi Axzug Gr. 65 Subspindle: Technology:Motorspindle Speed:7.000 rpm Power (max.):22 kW Torque (max.):130 Nm Workpiececlamping:3-Jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector:Pneumatic Movement in Z:750 mm Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Y/Z:270/100/750 mm Eilgang in X/Y/Z:24/10/30 m/min Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VDI30 Tooldrive:4.000 rpm, 6,7 kW, 25 Nm Movement in X/Z:205/750 mm Eilgang in X/Z:24/30 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pumps with High-pressure, 14 bar Rawmaterialfeed:Barloader, EMCO LM 1200 Finishedpartremoval:Workpiece unloading device (pneumatic) with conveyor belt Oilmistseparation:Mechanical extraction, Absolent Toolholder:Misc. static and driven toolholder Further Accessory:Spindlechiller

Condition: excellent (used), Year of construction: 2017, Max. turning length: 1,214 mm Max. turning diameter: 420 mm Chuck size: 305 mm Max. swing over bed: 700 mm Travel distances - X-axis: 280 mm - Y-axis: 120 mm - Z-axis: 1,390 mm Rapid traverse - Rapid traverse X/Y/Z: 20 / 10 / 24 m/min Spindle - Bar capacity: 89 mm - Max. speed: 2,500 rpm - Drive power: 22 / 18.5 kW - Torque: 1,050 / 883.8 Nm Turret - Tool stations: 12 - Driven tool stations: 12 - Tool holder: BMT-65 Accessories: • Box ways Dkodpfxjw Tcvmj Adueu • C-axis • Y-axis • Air blow gun • Steady rest base • Manual steady rest, manufacturer RICHTER • Chip conveyor • Automatic tailstock and quill • Work light • Coolant tank capacity: 240 liters Connected load: 55 kVA Weight: approx. 7,800 kg

Condition: ready for operation (used), Year of construction: 2012, Mori Seiki NLX2500MC Turning Centre (2012) Mori Seiki M370BM Control Manufactured & Installed in 2012 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm, Tailstock, 10” Chuck, Swarf Conveyor, Mist Extraction Machine Capacity: Max’ Swing over Bed 544mm Max’ Swing over Cross Slide 541mm Max’ Recommended Turning Dia’ 366mm Standard Turning Dia’ 271mm Max’ Turning Length 705mm Max’ Bar Work Dia’ 80mm X Axis Travel 260mm Z Axis Travel 795mm Spindle: Main Spindle Speeds 4000rpm 2 Spinde Ranges Spindle Nose A2-8 10” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 3380 x 1980mm Weight 5500kg For sale with Jet Machinery Ltd Jet Machinery Stock No: #78831 Dodpfx Adew Rrzaeujku Machine Serial Number: NL253120316 Ex works - £54,950.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Dkedpfx Adsw Rry Nouou Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1998, Heidenhain CNC-Pilot 3190 control Swing diameter 570 mm Turning diameter 420 mm Turning length 600 mm Dodpfx Aew Rc Hyjdusku Spindle speed 5,000 rpm 12-position turret Tailstock Chip conveyor Various tool holders