Mai Deals Maschinenhandel

Condition: ready for operation (used), A SIELEMANN rotary table, surface, internal, and external cylindrical grinding machine, TYPE R100 RETROFIT 2002, in good condition. The machine is very precise and extremely stable. Largest workpiece diameter: 1000 mm Largest workpiece height (without clamping device): 350 mm Surface grinding: Largest grinding width of a circular surface: 375 mm with a minimum bore diameter of 50 mm Internal cylindrical grinding: Drgyqr Largest bore diameter: 700 mm Smallest bore diameter: 70 mm Largest bore length: 300 mm External cylindrical grinding: Largest outer diameter to be ground: 800 mm Smallest outer diameter to be ground: 70 mm

Condition: refurbished (used), Year of construction: 2025, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: B23Zpmpizo The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: like new (used), We are selling a refurbished belt filter that can be fitted with rollers if required. The following work was carried out: - Cleaning - Painting - Replacing the pump - Replacing the motor Technical data: Tank capacity: 125 l Cleaning performance max.: 60 l / min Bpthgssfhq

Condition: excellent (used), Year of construction: 2006, We are selling a reliable ALZRAPID 32 in good condition. The machine is ready for demonstration under power and available at short notice. Please refer to the following description for the technical data: Technical data: Spindle speeds: 102/152/204/250/304/408/ 500/608/816 /1000/ 1216/2000 Short spindle: MK4 Drilling capacity steel E 335 (St 60) *1): 32 mm Drilling capacity cast iron EN-GJL-200 (GG 20): 32 mm Dq2Ygf Motor: 1500/3000 rpm Accessories: - Digital display with glass scales - Drill chuck (see picture) - Thread cutting - R 0 L - setting - Adjustable feet - Documentation and operating instructions

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, grinding length: 2,000 mm, grinding width: 1,000 mm, total height: 800 mm, warranty duration: 12 months, power: 29 kW (39.43 HP), space requirement height: 4,900 mm, space requirement length: 6,950 mm, space requirement width: 4,200 mm, The machine has been completely mechanically and partially overhauled electronically. The FAVRETTO ME200 is extremely stable and has enormous power for excellent and very good grinding results. The machine was originally built in 2008. The complete equipment, the various options and the delivery time are available in a quote on request. List of work carried out on the machine in 2024: Txdl9Ormo -Seal change table cylinder and cylinder test -Motor change from Technai to Siemens, spindle and bearing machining to adapt to the new control system -Z-axis: Motor change from Technai to Siemens with gearbox -Overhaul of the grinding spindle -Overhaul of the hydraulic unit -Overhaul of ball screws -Replacement of components in the control cabinet -Hand scraping of machine bed and machine table Technical data: Grinding motor power: 29 kW Grinding wheel dimensions: 610 x 304.8 x 100 mm Grinding wheel peripheral speed: 35 m/s Magnet dimensions: 900 x 2000 mm Total connected load: 50 kW Warranty: 12 months Transport + commissioning: On request

Condition: good (used), Year of construction: 2015, center height: 180 mm, grinding length: 650 mm, !SALE ON BEHALF OF A BROKER! The machine was completely cleaned and serviced in 2021 as part of the attachment of the loading unit, including readjustment of the geometry. Technical data: - Center height: 180 mm - Sanding length: 650 mm - Grinding wheel Ø: 500 mm - Grinding wheel width max: 120 mm - Speed: 50 m/s - Workpiece headstock MK4 - Tailstock MK4 Accessories: - Marposs P7 measuring system Cumxsxfli8 - Joint detection and crash monitoring - Belt filter - Suction unit - Handwheel - Hydraulic tailstock with foot switch - Automation NEW IN 2022 with adjustable chains for universal use - Dresser on tailstock - Glass scales in X- and Z-axis

Condition: excellent (used), Year of construction: 2008, operating hours: 26,710 h, Functionality: fully functional, turning length: 744 mm, turning diameter over cross slide: 500 mm, The machine is in very good condition and is being sold with lots of accessories and a large loading magazine: Technical data: Travel path X/Z - X2/Z2: 270/750 // 205/750 mm Travel path Y: 100 (+-50) mm Max. bar diameter: 65 mm Cug3Mouc0E Main spindle drive: 0 - 5000 rpm Counter spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Turret: 2 pcs. for driven. Tools (12 places each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs. Main and counter spindle with C-axis Accessories: - Bar loader Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle - Extraction - Chip conveyor - Pick-up device with discharge belt - KSS system Knoll SF 1000/Turbo-1 - HSP: Collet chuck - GSP: 3-jaw chuck - Jaw holder left/right 27 pcs. - Angle collet ER 25 7 pcs. - Angle adjustable driven 3 pcs. - Angle 45 degree driven 2 pcs. - Straight driven 6 pcs. - Angle Weldon 10 pcs. - Weldon angle recessed 15 pcs. - Weldon angle wide 4 pcs. - Driven angle 3 pcs. -Straight Weldon 5 pcs.

Condition: used, Year of construction: 2004, The machine is in good used condition and can be inspected under power. Technical data: Control Heidenhain iTNC 530 Travel X 3,000 mm Y 800 mm Z 800 mm Ckia0Gwz0M Spindle: Spindle speed 20 - 12,000 rpm Tool holder SK40 48-position tool changer NC rotary table: Table load max. 900 kg Face plate diameter 630 mm NC swivel head: Swivel range +/- 90 Other equipment and accessories included: -chip conveyor -Work area lighting 2-fold -Rinsing gun -IKZ 2 bar -Direct measuring system in X/Y/Z and NC rotary table

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Bei2V9U Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: new, Year of construction: 2024, Technical data: Grinding headstock: 35m/s Center height: 100 mm Center width: 430 mm Grinding length: 400 mm Travel: 180 mm/Ø Grinding wheel: 350 x 50 x 127 mm Machine equipment (standard): 1 FANUC 0I-TFP control unit with safety-integrated function 1 pc. Manual control unit with handwheel for manual axis positioning 1 pc. Workpiece headstock MK5 1 pc. Tailstock MK3 with fine adjustment 1 pc. interface (loading unit) 1 grinding wheel flange 1 pc. Full casing with door monitoring for sanding with emulsion 1 set of operating tools and technical documentation in German OPTIONAL: - ELASO balancing system with CRASH over-washing - ELASO diameter measuring system with electric lifting carriage Weight and space requirement of the machine: Ciyzjakp7G 4400 kg // 2180x4450x2400 mm

Condition: good (used), Year of construction: 2005, operating hours: 13,167 h, We are selling on behalf of a customer a used TRAUB TNK36 CNC short turning machine built in 2005 in good condition. The machine has only 13218 hours and was used for light machining. An inspection under power at the seller's premises is possible at any time by prior appointment. Equipment of the machine: - Driven tools, used - Filter system - Chip conveyor - Collets, second-hand - TX8i control unit Technical data: - Main and counter spindle - 1 turret with 12 stations, all driven - Clamping diameter: 36 mm - Spindle speed 6300 rpm - Front tool holder: 5 - Tool holder rear: 5 - Feed Y1 axis: 20 mm - Feed X-axis: 50 mm - Feed Z-axis: 100 mm Do3I8F - X3 axis - Z4 axis

Condition: new, Year of construction: 2024, Functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: Rqbcu09Nk - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: reconditioned (used), Year of construction: 1992, Functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Pkylrclvmj Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 2024, Condition: as good as new (ex-display), Manufacturer: TSCHUDIN Machine type: SL 105U Year of construction: 2024 Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Center width: 1000 mm Bdgiwj2Neq Grinding length: 1000 mm Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300

Condition: new, Year of construction: 2025, Functionality: unexamined, Data Machine type: TBF 650 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 650 mm Grinding length: 620 mm Grinding wheel: 500 x 80 x 203,2 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification. Painting Once the geometry of the machine has been restored, it is prepared for repainting. All enclosures, tables and the machine bed are stripped of old paint, cleaned and repainted. Controls The machine’s Marposs E14 control unit is replaced with a Siemens 840D SL control unit. The control unit is operated via a 15” display and can be customised to meet specific customer requirements Bcebgsjq

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Grinding wheel right: 250 x 25 x 127 mm Condition Uwt9Nrgmy The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: new, Year of construction: 2025, Functionality: fully functional, Data Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 380 mm Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Condition Uusklpxio The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.