Lithomecanica

Condition: good (used), Year of construction: 1996, functionality: fully functional, STC-Ref:G-022-7685 Heidelberg Pate Bender Multiplate, Year: 1996 equipped: Lsdpjyl I A Asfx Agzohc - Plate bender - model: MULTIPLATE - HDM --> available: 02/2026

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Ljdpfx Ajylyhdsgzehc Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6.Cooling Tower: Books are transported from the binder through the cooling tower to the three-knife trimmer. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)

Year of construction: 1995, condition: used, Year: 1995 (overhaul 2022) Condition: functional Scope of machine overhaul in 2022: - Complete replacement of compressed air distribution (hoses) including a large number of air pistons - Refurbishment of the oil lubrication of the machine Ledpfx Agsyllgxezehc - Loading head repair - Main engine overhaul - Rebuilding of loading sensors - Replacing all rubber rollers Technical specification: - 5 colors - Machine speed: 15.000 - Counter - 448,904,046 sheets - Alcohol humidification - Weko Duster - Drying Eltosch - Remote control of color books and RCI registers - Automatic washing of ink rollers - PIAB air supply

Year of construction: 2007, condition: used, Year: 2007 Condition: good, functional Kolbus DA 260 - Automatic Casemaker Technical specifications: - Maximum open case size - 670 × 390 mm - Minimum open case size - 205 × 140 mm - Spine width (joint width) - 4 – 15 mm - Distance between boards - 14 – 120 mm - Closed case width - 8 – 15 mm - Cover material width (paper/fabric) - 223 – 708 mm - Cover material height (paper/fabric) - 130 – 428 mm - Board thickness - 1 – 4 mm - Board width - 95 – 328 mm - Board height - 140 – 390 mm Ledpfsylk Rpsx Agzehc - Center strip thickness (cardboard) - 1 – 4 mm - Center strip width (board) - 6 – 90 mm - Strip thickness (roll) - 0.3 – 0.6 mm Applications: The Kolbus DA 260 is ideal for book production, premium case manufacturing, presentation boxes, and specialty packaging. Its reliability and precision ensure high-quality output with minimal material waste in continuous production.

Condition: good (used), Year of construction: 2021, We offer this good Intec ColorCut FB8000 Digital Die Cutter, year of construction 2021. Lhjdsylhipepfx Agzoc Manufacturer: intec Model: ColorCut FB8000 Year of manufacture: 2021 Condition: good Category ID: 672 Type ID: 1690 Type: Intec ColorCut FB8000 Digital Die Cutter If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, Year of construction: 2023, Doming System / Epoxy Resin Doming Machine for Magnet, Sticker & Label Production – Print Finishing & Promotional Item Manufacturing – Accessory Package Optional For sale is a manual doming system for the professional production and finishing of magnets, stickers, labels, signs, emblems, and other promotional items using 3D epoxy resin (liquid doming). Ideal for print shops, promotional item manufacturers, label producers, or small craft businesses looking to refine their print products with a premium finish and expand their product portfolio. The machine enables the creation of durable, scratch-resistant, and visually appealing 3D surfaces – perfect for magnet products, stickers, nameplates, logos, emblems, and custom-made items. The machine is currently in operation and will be available from March 2026. Original purchase price in October 2024: EUR 10,000. Invoice is available. Optional accessories (can be included upon request): - Victoria platen die cutter – motor defective, ideal for technically skilled hobbyists or for repair – free of charge - Laminating machine – price negotiable - 2 drying racks – price negotiable - Approx. 50 steel plates for production – price negotiable Ledeyi Ukuspfx Agzshc Of particular note: For questions or during ongoing operation, Neumann Company provides very reliable support via WhatsApp chat, voice, or video. I have always received prompt assistance. The support is quick, straightforward, and solution-oriented. If you have questions about the machine or accessories, I am also happy to help at any time. Viewing by appointment is possible.

Year of construction: 2017, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: Asso 600 by Chiossi & Cavazzuti Hot air dryer for DTG printing good condition. Double belt conveyor. Year 2017. Textile oven almost new, overhauled and cleaned. Sold new for just over €12,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti ASSO 600 drying tunnel: - MAX POWER: 9,5 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 600 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x600 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process. Lodpfx Agsyh Rgyszohc

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, machine/vehicle number: GN-300DF, GN-300DF Automatic Contour Hot Stamping Machine employs digital automatic contouring, designed for hot stamping on the peripheral surfaces of polygonal, elliptical, and irregularly shaped products. It is suitable for hot stamping or foil stamping on the peripheral surfaces of square, rectangular, elliptical, polygonal, irregularly shaped, and other products. This machine accommodates products of any shape and size. Simply replace the corresponding fixture when embossing products of different shapes and specifications. It offers excellent embossing results, safe and reliable operation, and high efficiency. Machine size :L1580xW1080xH1980mm Processing size: Ф350xL150mm Max.Opening: 350mm Total Power: 4.0KW Max.Pressure: 100~250Kg Efficiencyi: 100~200Pcs/h Machine weight: 350Kg Powersupply: AC220V/50HZ Lhjdpfx Aoyhuu Rjgzec

Year of construction: 2018, condition: used, functionality: fully functional, Pneumatic transfer press carousel with 8 work plates, each 500 x 400 mm, also including sleeve plates and children's plates. Lsdsyhmyfspfx Agzohc

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MX60252 and MX60400, We have 2 Datacard MX6000 machines for sale, including spare parts, foil, and additional accessories. The machines are used but in good condition. Serial numbers: MX60252 and MX60400 Configuration for MX60252: - Operating System: Microsoft Windows 7 Embedded Standard Ledeyfminspfx Agzehc - OS Version: 6.1.7601 Service Pack 1 Build 7601 - Year of manufacture: 2008 - Approximate card counts: - goodCards: 16,812,231 - pickedCards: 16,883,746 - Modules included: - System Module - Input Module - Cleaning Module - Magstripe Module - Thermo Front Module Gen 2 - Thermo Rear Module Gen 2 - Output Module Configuration for MX60400: - Operating System: Microsoft Windows 7 Embedded Standard - OS Version: 6.1.7601 Service Pack 1 Build 7601 - Year of manufacture: 2009 - Approximate card counts: - goodCards: 18,240,693 - pickedCards: 18,287,221 - Modules included: - System Module - Input Module - Cleaning Module - Magstripe Module - Thermo Front Module Gen 1 - Thermo Rear Module Gen 1 - Output Module - 2x Chip Module Rack (type: 11 stations Smartware), never used, only for transport. Note: The node board is missing from one of the modules. Additional test equipment for magnetic stripe: - 1 pc Barns MT3000E Verify (2018), s/n ME3455 The price applies to both machines together.

Condition: like new (used), Year of construction: 2015, 1 used Heidelberg InpressControl, removed from a 2015 Heidelberg XL 106-5+L(X2). Lhodpfx Ageyfgt Hszsc

Year of construction: 2015, condition: used, functionality: fully functional, machine/vehicle number: 352/2015, QUICKER U ultrasonic cleaning tank for raster/anilox rollers. The tank accommodates rollers up to 410 mm (and possibly a few mm more). It has capacity for ultrasonic cleaning of two rollers at the same time and one position for rinsing. The tank is equipped with a filtration system which extends the detergent solution's usability. The set includes a complete set of adapters for adjusting to small roller widths (double adapter for the washing section and a single adapter for the rinsing section). The washing section is equipped with heaters and the solution temperature can be adjusted as needed. Ultrasonic cleaning duration is set by a mechanical timer. Ljdpfx Asyda Nxsgzohc Basic specifications as shown in the table: Operating voltage 230V / 50Hz, ultrasonic power: 3000W.

Year of construction: 2013, condition: used, functionality: fully functional, compressed air connection: 8 bar, continuous operating pressure: 6 bar, machine/vehicle number: 375405, Hot stamping machine RS Druckmaschinen Type 75 with conical round printing unit and sliding table. Suitable for embossing thanks to the sliding table, but used for photorealistic decoration of reusable cups with image-decor foil using the conical round stamping process. Includes a teach box for setting the print area in round stamping and features electronic pressure monitoring. Ledpfeyc Ny Rsx Agzehc

Condition: ready for operation (used), A Canon large format plotter is available. Print resolution: 600dpi/1200dpi, min. line width: 0.06mm, print speed: 8xA1/min, roll capacity: 4, max. media capacity: 730m², paper weight: 60g-110g/m². Machine dimensions X/Y/Z: approx. 1550mm/850mm/1500mm, weight: approx. 250kg. Includes 5 tones. Documentation available. On-site inspection is possible. Lhjdpfx Agsycwrujzsc

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Magnesium etching machine STOMA 240L The front bearings of the machine need to be replaced. Lhsdpjyb R Rzefx Agzoc The machine is operating well. Chiller included; however, the chiller needs to be installed by a professional. Currently, the machine is being cooled by water.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Konica Minolta SD-506 WY3’ brochure finisher. Item for sale: 1 x Konica Minolta SD-506 with the following features: Product specification: WY3 Lhedpfx Aoyamx Eogzsc Not the right equipment? We have additional accessories and machines in stock. Feel free to contact us! Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functionality test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: ZSCT-II (Bj.2014) + ZSCT-III (Bj.2019), overall weight: 570 kg, Year of construction: 2014, power: 4.5 kW (6.12 HP), We are offering a fully refurbished Iversen graphic ZSCT-II powder coating machine, year of manufacture 2014, for a negotiable net price of €14,000. In addition, we have an Iversen graphic ZSCT-III powder coating machine, year of manufacture 2019, available for a negotiable net price of €7,900, not refurbished but in working condition. As a special bonus, you will also receive a complimentary Iversen graphic ZSCT-III powder coating machine, year of manufacture 2016, provided as a donor for spare parts. Dimensions can be seen in the attached image. Model number: ZSCT-II Voltage: 380 V Power: 2–4.5 kW Belt width: 1000 mm Belt length: 1000 mm Sheet thickness: 1–5 mm Overall dimensions: 2000 × 1800 × 1850 mm Net weight: 570 kg Model number: ZSCT-III - Year 2019 - 91/0150 Voltage: 380 V Power: 3.1 kW Lhedpfxox Uqbnj Agzoc Pressure: 8 bar Model number: ZSCT-III - Year 2016 - 51/0116 (for spare parts) Voltage: 380 V Power: 3.1 kW Pressure: 8 bar If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, Equipped with Robatech gluing system Lodsx Rc Ryspfx Agzshc

Condition: used, Format: 0x0 Equipment: Lsdpfx Agsx Rcw Tozshc Linotype-Setzmaschine

Condition: used, Year of construction: 2017, functionality: fully functional, Machine type: Laminating and coating Lhedpfx Agex N Ucxjzsc Processes: Suitable for WET and DRY lamination Cutting system: Blade cutting system for polyester Feeder: Mabeg feeder Minimum sheet size: 32 × 29 cm Maximum sheet size: 106 × 142 cm Maximum mechanical speed: 70 m/min Maximum production speed: 65 m/min

Condition: used, Format: Equipment: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Lhsdpfjx N Ng Eox Agzoc Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

Year of construction: 2010, condition: used, Year: 2010 Condition: good Configuration: Ljdjx H Su Topfx Agzshc - concept with one knife - automatic feeder - automatic vertical unloader - fully automatic adjustment - machine without tooling required - two knives Technical parameters: - max. size (before trimming) - 330 x 241 mm - max. size (after trimming) - 305 x 229 mm - min. size (after trimming) - 148 x 102 mm - max. thickness - 51 mm - min. trimming on all sides - 2.5 mm - number of working programs - 99 - adjustment time - approximately 10 s - max. speed - 200 bindings / h - weight - 680 kg - dimensions - 1520 x 1320 x 1450 mm - connection - 230 V, 50/60 Hz, 3-phase, 20 A or 380/415VAC, 50 Hz 3-phase

Condition: used, Year of construction: 1933, functionality: fully functional, overall weight: 5,000 kg, total length: 4,000 mm, total height: 2,000 mm, total width: 2,000 mm, Lithographic press 55 x 75 cm. The machine is in very good mechanical condition, but will definitely require new rollers for printing. All spindles are present and some are still usable. Ideal machine for art studios or lithography workshops to produce high-quality lithographs. Very rare machine. Lhjdpfsx D Tnaox Agzsc

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,150 mm, total width: 1,100 mm, total height: 2,000 mm, Lithographic press, also known as scraper press, for manual printing from lithographic stones. Used by artists/lithographers, in schools, art schools, and museums. The machine was most recently used in the atelier of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 70 x 100 cm. Also very interesting as a display piece in entrance halls, restaurants, etc. Lodpex A H I Defx Agzjhc

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 762 mm, resolution (max.): 600 dpi, machine/vehicle number: 63507120672, production capacity: 40,000 unit/h, Submission of a bid obliges the buyer to collect the item within the stipulated period, no later than 31/12/2025! TECHNICAL DETAILS Printing technology: Inkjet Number of print units: up to 4 Number of ink cartridges: 12 Print resolution: 600 dpi Print speed: 40,000 addresses/hour Print area: 762 × 152 mm Paper formats Min. paper size: 85 × 40 mm Max. paper size: 762 × 520 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 1,476 × 58 × (810 – 915) mm Weight: 131 kg EQUIPMENT Feeder for filled envelopes or finished brochures Ljdsxyf E Aspfx Agzohc Double tabber for sealing self-mailers or applying labels Vacuum transport belt Direct printing system with 6 print heads (IR possible) Belt delivery at a 90° angle