Condition: excellent (used), Dustomat 10 1.5 HP tested Deb Hcewgm E Ho Ailokl

Condition: used, Year of construction: 2008, Underfloor painting system with return air ceiling and heating coil. Exhaust air unit, air volume: 6,000/3,150 m³/h. Motor: 2.7/0.7 kW. Supply air unit, air volume: 7,300/3,650 m³/h. Motor: 0.46/2.2 kW. Heater: PWW 80/60°C / 84 kW. Dksb Hcovwaukj Ailel Storage location: Nattheim

Condition: used, volume capacity / length / mm Deb Hswgi S Aec Ailskl height / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: good (used), Year of construction: 2006, Industrial extraction system GESCHA, type: EURO-SET professional system, mobile, year of manufacture: 2006 Dkobsv Sc H So Hc Ailel

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. Dkjbewhpcqs Hc Ailsl The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: used, Year of construction: 1992, volume flow: 6,500 m³/h, filter area: 0.8 m², total length: 1,050 mm, total height: 850 mm, nominal power: 0.75 kW (1.02 HP), Motor 0.75 kW, Filter area 1000 x 800 mm Extraction connection 350 mm Dksbjwhnkaj Hc Ailol Chassis

Condition: good (used), Year of construction: 2012, Functionality: fully functional, filter area: 120 m², volume flow: 18,000 m³/h, Filter hose length 2000 mm Mechanical/pneumatic shaking Base assembly with agitator and screw discharge Gear motor 2.2 kW Connection for briquette press with air recirculation Dkeb Hc Aiowhlkwelel

Year of construction: 2001, operating hours: 123 h, Condition: ready for operation (used), machine/vehicle number: 123, Metal silo for storage of woodchips, etc. Technical description: silo DM: 5m Height: 8 m with outfeeding unit (screw conveyor connection to output) Cappacity: 42 m3 With outfeeding transport screw conveyor to the top of the silo building. Already dismountled, visit possible by appointment at our warehouse H-2013 Pomáz/Hungary. Debjftdv Us Hc Ailekl

Condition: excellent (used), Schuko 4kw sawdust extractor Number of filter bags 24 Diameter of filter bags fi220mm Length of filter bags 115mm Number of collection bags 4 Dob Hc Ajwf Np Ejiljkl Diameter of collection bags fi500mm Diameter of inlet nozzle 250mm Dimensions of extractor 352x97x284cm

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 8106275, The Vacomat 300 XP large dust extractor is the ideal dust extraction system for multi-machine extraction. Air volumes of up to 6,000 m³/h can be conveyed with this clean air extraction system, which also makes it interesting for CNC processing or wide-belt sanding machines. The Vacomat 300 XP is equipped with an automatic control system as standard to ensure that the powerful extraction system is not forgotten or left idle. When a connected machine is switched on, the dust extractor fan starts automatically so that extraction begins immediately. Our Vacomat 300 XP is manufactured according to the modular principle. As standard, the dust and chip mixture is discharged into four dust-tight chip collection garbage cans (4 x 120 l) with inserted, sturdy plastic bags. A vacuum channel holds the plastic bags securely in the collection container. Viewing windows make it easier to check their fill level. It can also be discharged via chip containers, ATEX rotary valves and screw conveyors for disposal in a briquetting press, BigBags, a container or chip bunker. The filter bags are cleaned automatically after all connected processing machines have been switched off. Our patented filter shaker cleans the filter bags pneumatically/mechanically. Dust and chips are gently knocked out via the compressed air connection using a type of "shaking". As an option, especially recommended for very high and particularly fine dust content, an efficient pressure surge cleaning system is available (ATTENTION: overall height then +100 mm and length +350 mm). Cleaning via the compressed air tank takes place offline, after extraction operation. Dsb Hjt Nfaloc Ailekl

Condition: used, Year of construction: 1998, Functionality: fully functional, total height: 3,000 mm, total width: 2,500 mm, filter area: 23 m², type of input current: three-phase, negative pressure: 3,550 Pa, volume flow: 3,450 m³/h, nominal flow rate: 3,450 m³/h, nominal power: 5.5 kW (7.48 HP), Equipment: rotational speed infinitely variable, Used dust extractor for 2-3 woodworking machines or similar. The unit can be easily installed outdoors. High-quality equipment with frequency converter and machine detection/slider control. Dkjbowhn T Is Hc Ailol The unit will be fully tested by us and fitted with new filters.

Condition: not inspected (used), M.-No. 105813, built in 1988, max. air flow 6500 m³/h, motor power 2kW, with heat exchanger, 1" water connection, LxWxH: 2150 x 820 x 820 mm, 2 return air ducts 2000x950x400mm, 1 return air duct 950x950x400mm, external wall connection 700x700mm, bird screen 660x590mm, heat exchanger outlet 400x400mm, WITHOUT connections to return air ducts Dksbowhncpj Hc Ailsl

Condition: good (used), Year of construction: 2002, Underframe with funnel and chain conveyor for material discharge Filter area designed as an inlet or filter chamber with externally loaded filter hoses stabilized by support baskets, pressure relief device in accordance with VDI 3673 Clean air area with purge air fan mounted on trolley, access to the clean air area through maintenance door via ladder with platform and back protection according to UVW Circuit to control the cleaning (depending on the differential pressure) and the material discharge First commissioning in 2002 including rotary valve type V7 (pressure-tight) 1 "dry" fire extinguishing system 1 transport fan (clean gas) 4 vibration dampers 2 Flexible connections 1 circular flow line to feed two on-site containers 2 toggle switches 3 galvanized electric shut-off valves for shutting off the ring running pipe u tue fresh air intake when loading the silo 1 return air duct with 180 degree deflection and simultaneous pressure relief 1 splitter silencer 1 electric switch cabinet ES up to 140 KW 1 complete level indicator for chip bunker 1 pressure measuring device for suction 1 frequency converter type Danfoss VLT 6000 for transport system Filter system Filter area 522 m² - filter hoses 152 pieces (renewed approx. 1.5 years ago) - 1. Extraction fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 2nd exhaust fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 3rd chip transport fan (to the silo) D = 315 mm, motor 18.5 KW, volume flow 6,200 m³ / h. / 2935 rpm. at 50 Hz - Intake socket D = 570 mm / D = 450 mm / D = 350 mm - Chain discharge 0.55 KW - Cleaning with a purge air fan 5.5 KW - Control cabinet with control and 3x Danfoss frequency converters Filter dimensions approx. Width = 2400 mm x length = 7500 mm x height = 9750 mm (discharge 2550 mm + 2400 + 2400 + 2400 mm = 9750 mm) Dimensions fan return air housing (2x) approx. Width = 1700 mm x length = 2000 mm x height = 4900 mm Total length of the system (filter + 2x fan return air housing) approx. 18.5 m New price of the system over € 200,000,-- More photos on our website Dob Hc Aehbv A Aeilekl

Condition: good (used), The stationary compact dust extractors of the MOBEX-P series are suitable for extracting dry and free-flowing dust. Extractors can be used in almost all industries for single and multi-part workstations, such as circular saws, grinding and milling machines, etc. Up to 4 suction points can be used at the same time. The devices are based on an innovative housing concept, with a patented drive system, optionally equipped with IFA-tested versions. Areas of application: - In case of exhausting one or more workstations - Sawing, cutting - Grinding, polishing - Machining, milling Powder types: - Metal powder - Metal shavings - Plastic powder Dkob Hcjpcgxwe Ailjl Advantages: - High suction power - Preselection system - Jet-Pulse filter cleaning

Condition: good (used), Year of construction: 2013, Functionality: fully functional, Europac filter system EP 704 DS Year of construction 2013 Deb Hc Aotp Su Neilskl S/n 1340 2 filter bags diameter 660mm Suction capacity approx. 5100m3 /h Filter density 1 micron Motor power 7.5kW, three-phase current 400 V 50 Hz Noise level: 70-90 dB(A) Main outlet diameter 250mm Chip bags approx. 1.65m3 Mobile platform ( rollers ) Protection class IP 54 Dimensions: 2.0mm x 1.65m height 3060mm Weight 300 kg Technical specifications subject to change

Condition: excellent (used), Year of construction: 2014, Traditional bag extraction sprays the finest, most harmful dust around the workshop. The Alko power unit 200 traps the finest dust in a sealed enclosure. Sawdust does not pass through the fan, but is trapped beforehand in the unit's special separator. The filters are cleaned automatically by reverse blows of compressed air, which activates the self-cleaning system to keep the exhaust performance at the same level. Changing sawdust bags is incredibly easy, just lift the cart levers and drive it out. - dimensions 2296 x 830 x 2050 mm -3KW motor -capacity 2261 m / h - filter area 13.8 m2 -capacity 2x250l Djb Hsmqkxboc Ailekl -weight 470kg -volume 72 decibels

Condition: used, Year of construction: 2022, in a sturdy galvanized sheet steel construction. Work surface with special folding cardboard filter, an additional post-filter and a filter cassette for extraction in the floor area. All filters can be changed quickly and easily. The internal radial fan, in explosion-proof design, is equipped with a blade wheel made of galvanized sheet steel. The explosion-proof drive motor (EEx nA II) is located outside the air flow and drives the fan directly. A 10 m long supply cable and a plug-circuit breaker combination with a built-in on/off switch are included in the scope of delivery. CAUTION! The switch is not explosion-proof and is only approved for use outside of potentially explosive areas. The fan pressure nozzle is located at the top. The air outlet is vertically upwards. Our paint mist extraction wall complies with the latest regulations of the Immission Control Act. The paint mist extraction wall is designed for installation in Zone 2 painting areas, where the average calculated concentration of flammable solvents is limited to < 25% of the lower explosion limit. Technical data: Max. volume flow: 3500 m3/h Exhaust air nozzle: 300 mm diameter. Work surface: 2000 x 1000 mm Space requirement: 2600 x 920 x 1420 mm high Motor: 1.50 kW, EEx nA II T3, IP 55 1500 min-1, B5, 400 V, 50 Hz ATEX marking Ex II 3 G Sound pressure level: 75 dB(A) Weight: 220 kg Fan: right Folding cardboard filter: 1000 x 2000 mm - 1 piece 2072090518 Filter cut-out for Paint-Star - 1 piece 2072091473 Cassette filter for Paintstar - 1 piece Floor tray PBA 20/24 1 piece Length A: 1984 mm, width B: 2378 mm Access ramp for PBA 20/24 1 piece Energy saving flap pn 300mm Each unit includes an air cylinder, 10 m air hose, and a lever valve with a bracket for hanging a spray gun. The energy-saving flap allows approximately 80% of heat energy and approximately 30% of electrical energy to be saved during setup time. Storage location: Garbsen Dkeb Hjvvizdec Ailol

Year of construction: 2018, Condition: excellent (used), Technical datas: - Max. volume flow: 4500 m3 / h - Motor power: 2.2 kW - Speed: 1/1410 rpm - Connection: d = 450 mm Dkeb Hcofl Uage Ailel

Condition: excellent (used), Year of construction: 2015, Year of manufacture: 2015 Air capacity: 8866 m3/h Engine power: 15 kW Voltage: 400 V Djb Hc Aijr Dbuqolokl Weight: 295 kg Static pressure: 2912 Pa Speed: 2940 U/min Frequency: 50 Hz Amperage: 26 A

Year of construction: 2022, Condition: good (used), Air capacity: 3334 m3/h Engine power: 7.5 kW Connection inner diameter: 200 mm Static pressure: 4083 Pa Frequency: 50 Hz Weight: 231 kg Fan: 3,300 euros + VAT Deb Hcokt S Avs Ailjkl Cellular dispenser: 2,400 euros + VAT

Year of construction: 2019, Condition: excellent (used), Year of manufacture: 2019 Air capacity: 8191 m3/h Engine power: 18.5 kW Connection diameter: 350 mm Static pressure: 3983 Pa Speed: 2955 U/min Voltage: 400 V Frequency: 50 Hz Dsb Hc Ajm H T Tveilskl Weight: 302 kg

Condition: good (used), Electric motor dimensions: Length with pulley 1.0 m Doboh A Rq Ho Hc Ailskl It is 0.55 m wide Height 0.55 m with junction box 0.67 m It weighs 510 kg Engine power 75 kW Touch protection IP 55 Speed ​​1480 rpm

Year of construction: 2011, Condition: excellent (used), Air power: Dkjb Hsd Nah Tjc Ailel ~ 4000 m3 / h ~ 2800 Pa Power: 11kW Stub diameter: 250 mm

Year of construction: 1990, Condition: excellent (used), Power: 11 kW Air capacity: ~ 10,000 m3 / h Dkjb Hjd S Afcoc Ailsl Stub diameter: 400 mm Year of production: 1990

Year of construction: 1992, Condition: good (used), Air capacity: 30,400 m3 / h Dob Hc Aijh A Rrrslekl Engine power: 33 kW Static pressure: 3100 Pa Speed: 1600 rpm