Condition: as good as new (ex-display), Year of construction: 2022, 7.5 kW screw compressor Almig (10 bar) Type: BELT 8 XP Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 990 liters / min Installed motor power: 7.5 kW Protection class / insulation class drive motor: IP 55/ ISO F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 63 Compressed air connection: G 3/4 " Length: 800 mm Width: 670 mm Height: 1100 mm Dodpfjw Aanyjx Akvjwa Weight: 275 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2021, operating hours: 2,235 h, condition: used, used screwcompressor immediately available: variable RENNER RSF 250 D - (6 to 8 bar) frequency-controlled, direct-driven screw compressor with RENNERtronic control with REflex control - adjustable pressure range 6 to 8 bar Hours: 2235 h Pressure: 6 to 8 bar Nominal output: 250 kW Quantity delivered: at 6 bar: 12.13 to 49.30 m³ / min at 7 bar: 11.80 to 44.50 m³ / min Sound level: 84 dB (A) Compressed air outlet: DN 100 Dimensions length x width x height: 3663 x 2100 x 2338 mm Weight: 5530 kg Year: 2021 Dwodpfjh Rvpkjx Akvja Visit our shop. We always have a large selection of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2025, New speed controlled ALMIG LENTO 37 LK screwcompressor oilfree, compressor is on stock Immediately available. Controller: Air Control P Technical specifications Type: LENTO 37 LK Possible overpressures of the compressor: (infinitely adjustable): 5 to 12 bar Delivery quantity at minimum / maximum speed: at 5 bar min/max : 1,41 / 6,67 m³/min at 6 bar min/max : 1,40 / 6,41 m³/min at 7 bar min/max : 1,39 / 6,14 m³/min at 8 bar min/max : 1,38 to 5,86 m³/min at 9 bar min/max : 1,37 to 5,60 m³/min at 10 bar min/max : 1,35 to 5,34 m³/min at 11 bar min/max : 1,34 to 5,09 m³/min at 12 bar min/max : 1,33 to 4,48 m³/min elektric motor power: 37 kW Dwodpfx Akjh Unqasvja Operating voltage / frequency: 380 V / 41/148 Hz Residual oil content: 0 mg / m³ SPL: 50% load: 74 dB (A) 100% load: 77 dB (A) Length: 2300 mm Width: 1400 mm Height: 2265 mm Weight: 1650 kg Compressed air connection: G 1 1/2" inch

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0169, Exhibit in stock immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor The new compressor is in stock and available immediately Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 540 x 553 x 1014 mm Weight: 198 kg Operating hours: 0,5 Bh Djdpoity Ecofx Akvjwa Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors.

Year of construction: 2020, operating hours: 14,099 h, condition: excellent (used), machine/vehicle number: S0055742, used ALMIG Belt XP 22 - (8 bar) oil-injected screw compressor with integrated heat recovery with Aircontrol Premium controller Operating hours: 14099 Bh Pressure: 8 bar Rated power: 22 kW Delivery quantity: 3.70 m³ / min Sound level: 74 dB (A) Compressed air outlet: G 1 " Dimensions length x width x height: 1250 x 880 x 1515 mm Weight: 681 kg Dedpfx Asix Aiyskvowa Visit our store we have a lot of used and new compressors on stock.

Year of construction: 2006, condition: good (used), machine/vehicle number: 3437/07, used oilfree dental piston compressor medicom Cattani 3 cyl with soundproof hood with 75 liter compressed air tank with air filter Year: 2006 good condition Technical specifications: Motor power: 1.5 kW Dsdpfx Akolu D Spovowa Delivery rate 238 l / min (5 bar) Pressure max: 10 bar Sound pressure level: 65,3 dB (A) L x D x H: 780 mm x 740 mm x 1080 mm We always have a large selection of new and used compressors in stock! Immediately available.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Trade fair exhibition machine available immediately (Plug and Play): Frequency-controlled RENNER RSDKF-PRO 7.5 (10 bar) oil-injected screw compressor including RENNERtronic Plus Touch control including 2 x galvanized 90 liter compressed air tanks including refrigeration dryer with level-controlled condensate drain including CEE plug Operating hours: 1 Pressure: 10 bar Rated power: 7.5 kW Quantity delivered: Delivery quantity at 10 bar: min. 0.33 m³/min max.: 1.09 m³/min Djdpjrxu Ahofx Akvswa Compressed air connection: G 1/2" Sound level: 62 dB(A) Volume compressed air tank: 2 x 90 liters Dimensions L x W x H: 1120 x 755 x 1550 mm Weight: 369kg Freight possible for an additional charge. Visit our store. We always have a large selection of new and used compressors in stock!

Year of construction: 2016, operating hours: 6,210 h, condition: like new (used), machine/vehicle number: MA0084_S0040858, used ALMIG FLEX 7 variable screw compressor with dryer Year: 2016 Hours: 6210 h (new service by 6210 hours) The compressor is on stock, available immediately. type: FLEX 7 effective volume flow min/max (acc. to ISO 1217 / Annex C) 5 bar: 0,55 - 1,32 m³/min 6 bar: 0,54 - 1,25 m³/min 8 bar: 0,53 - 1,11 m³/min Djdjglz U Dopfx Akvowa 10 bar: 0,52 - 0,97 m³/min 13 bar: 0,52 - 0,76 m³/min compressed air outlet: G 3/4" dimensions ( l x w x h ) 870 x 590 x 990 mm weight: 165 kg Visit our store ! We have a lot of new and used compressors on stock !

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5,5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/42-230 V / Hz Compressed air connection: 3/4“ G Length: 643 mm Width: 790 mm Height: 961 mm Weight: 250 kg Dwedpfeyay Itsx Akvea Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor Dwsdpfx Akjvr Eicsvja incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: new, Year of construction: 2025, Exhibit available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated cold dryer Pressure: 10 bar Nominal power: 15 kW Delivery rate: 2.11m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 1240 x 1260 mm Dodpfxjzh Hwij Akvjwa Weight: 395 kg Operating hours: 0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 2020, - Power KW - Operating pressure bar - Dryer - Tank Lt. TECHNICAL DETAILS TO BE VERIFIED Dwedpsv Aagqofx Akvoa

Condition: used, Year of construction: 1990, Industrial stationary piston air compressor in sound-insulated steel cabinet. Dsdpfx Aksyl Nz Hsvjwa Manufacturer: Reflex Model: ZU 57/3 – Typ 180 D Air receiver: 180 liters Made in Germany Complete unit including: Piston compressor Electric motor 180L air tank Pressure switch Noise reduction enclosure Condition: Used – Not tested. Sold as seen, ex works. Suitable for refurbishment or spare parts.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 280 kg, total length: 1,400 mm, total width: 650 mm, total height: 1,200 mm, power: 7.5 kW (10.20 HP), operating pressure: 10 bar, pressure (min.): 6 bar, pressure (max.): 10 bar, noise level: 60 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Highly efficient screw compressor with 7.5 kW / 10 bar (also available as a 4 kW version) complete 4-in-1 unit frequency-controlled servomotor 270-liter pressure tank refrigerant dryer fine filter New machine, delivery time approximately 1 week We would be happy to demonstrate the machine to you at our facility. Dodozpfwwjpfx Akvewa Highly efficient, permanent magnet servomotor Frequency-controlled / load-dependent for clean and dry compressed air suitable for laser applications with animated color display single-stage screw unit air-cooled durable and low-maintenance Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria technical data (approx.): Length: 1.40 m, Height: 1.20 m, Width: 0.65 m Weight: approx. 280 kg Pressure: 10 bar Flow rate: approx. 0.9 m³/min at 10 bar Noise level: 60 ± 2 dB(A)

Condition: used, Year of construction: 2023, feed pressure 11 bar liter capacity 727 l/min total power requirement 4,4 kW Dodpfxezpbi Ne Akvewa weight of the machine ca. 170 kg

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance Dsdpfx Asy Ecuzekvewa VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: Impact 20Bar Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Dodpsy Ecu Uefx Akvowa Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2013, A screw compressor Atlas Copco with integrated refrigerant dryer is offered. Power: 11kW, motor speed: 7700rpm, operating pressure: 12.75bar, capacity: 32l/s, variable speed controlled, operating hours: 9035h, weight: 271kg. An on-site inspection is possible. Dwedpszq Ec Nefx Akvsa

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD Dwsdszq An Njpfx Akvoa S/N AIF072891 YEAR 2001 POWER (kW) 181 OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED

Condition: used, Year of construction: 2006, FIAC CRS20 Soundproof Screw Compressor – Year 2006 Complete with a 500-litre air receiver and FIAC DS20/AC refrigerated air dryer, ideal for ensuring a continuous supply of compressed air with low noise levels. Djdezq Amropfx Akvowa Technical Specifications Air delivery (F.A.D.): 1,860 l/min Maximum pressure: 10 bar Power consumption: 17.6 kW Motor power: 20 HP Air receiver capacity: 500 litres Weight: 461 kg Availability: Delivery scheduled for September 2026.

Condition: excellent (used), Year of construction: 2013, PROD. KAESER TYPE BSD83 S/N 1036 YEAR 2013 POWER (kW) 45 CAPACITY (m3/min) 8.16 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 41872/62783 FREQUENCY CONVERTER no Dodpfx Aozq Aluekvswa BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2' NEW/USED USED

Condition: excellent (used), Year of construction: 2001, PROD. ATLASCOPCO TYPE GA160 Dwsdpfxjzq Afuj Akvja S/N AIF072890 YEAR 2001 POWER (kW) 167 CAPACITY (m3/min) 21 PRESSURE (bar) 8.5 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 3 NEW/USED USED

Condition: excellent (used), Year of construction: 2017, operating hours: 10,846 h, functionality: fully functional, Screw compressor, Variable28 Inverter integrated. 28 kW Dodpfeznuf Uex Akvowa 13 bar 4.24 m3/min Year of manufacture: 2017 Operating hours: 41,635

Condition: used, Year of construction: 2023, overall weight: 205 kg, total length: 1,180 mm, total width: 600 mm, total height: 1,470 mm, pressure (max.): 10 bar, noise level: 67 dB, Air delivery (at 10 bar): 1000 l/min Dwjdpfjzqvwwjx Akvoa Rated power: 7.5 kW Air receiver tank: 270 L Noise level: 67 dB(A) Dimensions (L x W x H): 118 x 60 x 147 cm Weight: 205 kg

Condition: used, Year of construction: 2015, operating hours: 49,965 h, functionality: fully functional, Screw compressor Kaeser CSDX165SFC Dwodpfxoznmqcj Akvoa Inverter integrated 90 kW 8.50 bar 15.84 m3/min Year of manufacture: 2015 Operating hours: 49,965