Used Cantilever racks for sale (98)

Condition: used, Cantilever rack, bolted to one side Dkjbu Hfwewhnmustol Very good condition, see pictures Height 6.5 m Arm length 120 cm 500 kg load per cantilever Load capacity per upright per side 2000 kg Center distance 150 cm, RAL 5010 4 cantilevers per upright Offer consists of 4 uprights – 4.5 linear meters: + 4 uprights with base, 6.5 m high. + 16 cantilevers, arm length / cantilever 120 cm Diagonal bracing, stiffeners, and spacers are included. Negotiable price: €2,360 net; P10287 Item is in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information upon request. We always have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical specifications, information, and prices, as well as prior sale! See our terms and conditions; all prices exclude VAT, ex-works.)

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: Dsbu Howhm Nbofwtekl - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: good (used), carrying capacity per cantilever arm: 800 kg, shelf height: 5,500 mm, shelf length: 10,000 mm, overall weight: 3,300 kg, Cantilever Rack Length: approx. 10 meters Height: 5500 mm Load capacity per arm: 800 kg Upright spacing: approx. 1250 mm The cantilever rack consists of: 9 uprights with base made of 300 mm IPE profile, upright height approx. 5500 mm 27 cantilever arms, length approx. 1500 mm, IPE 120, load capacity per arm: 800 kg 21 cantilever bridges Dkobu Hfewhdwijwtsl Diagonal bracing, upright connectors, screws Total weight: approx. 3300 kg Price: €5000 net / 1 rack The rack is located in Rostok 18184. Delivery is possible for an additional charge.

Condition: new, Cantilever racking is ideal for storing long goods such as pipes, bars or plates. The uprights and profiles of our cantilever racks are made of particularly resilient, hot-formed IPE profiles. The racking rows are of any length and can be used on one or both sides. Cantilever racking is relatively easy to install and reconfigure. With the absence of actual shelving, adjusting the height and angle of the arms is simple and quick. This flexibility in shelving allows you to store a variety of loads. If you need shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories as well as accessories and are happy to support you in your planning. Further accessories like for example: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please enquire about freight costs, stating your postcode and location, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Djbu Hedmkv Hjfwtokl Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: excellent (used), total width: 4,000 mm, total height: 9,000 mm, clearance between the columns: 2,000 mm, shelf length: 900 mm, Equipment: double-sided, Consisting of 3 double-sided columns H 9000 mm 9 shelves with 750 mm arms Shelf capacity 900 kg Dsbu Hfjulufpswtokl Shelf capacity 2700 kg Capacity per column front 8100 kg Column spacing 2000 mm

Condition: excellent (used), Year of construction: 2009, carrying capacity per cantilever arm: 800 kg, load capacity per stand: 8,000 kg, number of shelf rows: 5, frame height: 7,500 mm, shelf length: 1,200 mm, Equipment: double-sided, OHRA Cantilever Racks Year of production 2009 - 5 rows of double-sided racks 120 pcs of columns Dkobu Hfwewfm Urstjl - Column height 7500 mm - Distance between columns 1250.mm -1600mm - Arm length 1200 mm - arm load capacity 800 kg - column load capacity per side 4000 kg - Number of levels 5 Current capacity approx. 280 pallet places approx. 400 packages of sawn timber up to 3m long Last inspection 06.2024 The racks are currently installed Dismantling on the buyer's side Net price given We can offer a Combilift C4000 LPG 7500mm Triplex trolley for the racks

Condition: good (used), Year of construction: 2000, Workshop press with approx. 500 mm long stroke, piston rod 50 mm diameter total height 270 cm Dkobueuq Nc Te Hfwtsl max. pressure I do not know Hydraulics not included

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. Dsbu Hfwswhm I Rstjkl - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) Djbu Hfwsh R Taqstjkl - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,500 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 200 cm 140 kg/arm META Multistrong Data : - H : approx. 200 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1300 kg load per upright Djbjwhm I Dou Hfwtskl - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 200 cm made of IPE120. - 12 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1269,00 € net 1510,11 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Djbsmhhf Sou Hfwtekl - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand Dobu Hewhm H Tofwtskl - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Dkobuod Tqale Hfwtel Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 426 cm - D: approx. 137 cm - L: approx. 403 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 900 kg load per arm - 2700 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: Dobu Hjwhm Htjfwtskl - 04 x stands, including base approx. 426 cm made of IPE180. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €3031.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: Dkobuewhm Hms Hfwtel €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,500 mm, load capacity per stand: 560 kg, approx. 3.15 running meters. Cantilever shelf H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). Dsbu Hfewhm Haewtokl - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1525,00 € net 1814,75 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total height: 2,500 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net Dkebowhm E Nou Hfwtjl 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. Dksbjwhm Eisu Hfwtjl - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? Dksbu Hfwewhm D Sjtol - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Cantilever racking to your desired dimensions! Ideal for storing your long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system that allows you to add elements as your requirements evolve. Perfect for offcuts or long goods in metal and wood businesses. Why BLT cantilever racking? - Certified German manufacturer DIN EN 1090 - Made in Germany- - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load! - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - We use the legally prescribed C4 load plates in accordance with DIN EN 15635 / BGR 234 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the upright profile. Transportation : On request, delivery is carried out by our partner forwarding company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Debswhm D Eeu Hfwtekl Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Debu Hfjwhm Drowtokl Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. Dkobu Hfwewhm Dfjtsl You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Cantilever shelf, double-sided, new goods Data: Dksbu Hfwjwhm A Istol - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,000 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,000 mm, load capacity per stand: 1,300 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 200 cm 140 kg/arm META Multistrong Data : - H : approx. 200 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1300 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 200 cm made of IPE120. - 12 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 09 x META shelf, approx. 100 x 60 cm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1449,00 € net 1724,31 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Dkobu Hfwewhm Auotol Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : Dksbu Hfwowhm Abotol - H : approx. 426 cm - D : approx. 137 cm - L : approx. 403 cm - Cantilever arms : approx. 120 cm - Axial dimension: 131 cm - NEW GOODS immediately from stock. - 675 kg load per arm - 2700 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 426 cm made of IPE180. - 16 x cantilever arms approx. 120 cm made of IPE 100 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 3213,00 € net + legally valid value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.