Used building material fabrication for sale (63)

Year of construction: 2023, condition: new, 1.) Applications: Production of concrete blocks for: masonry, foundation, pillars, floor, belt, chimneys; gutters and gutter covers; 2.) Advantages: - High productivity - the active surface of the mold 1200 x 800mm (12 masonry blocks 400x200x200mm) - Hydraulic actuation - Teflon bushing of the sliding bearings on the guide columns - Reliable mechanical and hydraulic systems. - Operator seat - Concrete hopper – 700 liters - Drawer for concrete supply to the mold – hydraulically operated - 2 vibrators on the punch plate - 4 electric motovibrators - mold vibration - Automatic stop of vibration when unpacking - Polyurethane coated wheels + Hydraulically actuated wheel to change the direction of travel - Large variety of molds - Allows the installation of molds with a height of 370mm - can produce roadable ditches and open ditches Kjdpoiwxrgefx Ad Nowt 3.) Technical characteristics: - Maximum mold dimensions: 1200x800mm - Maximum finished product height: 370mm - Duration of a cycle: 60 seconds - Hopper capacity: 700 liters - Installed power: 15 kW - Supply voltage: 380V - Overall dimensions: 3.30 x 2.30 x 4.00m - Mass of the machine (with mold): 4000 kg - Vibration frequency: 3000rpm - Required amount of semi-dry concrete: 8 m3/hour - Recommended mixer: SAB6MC automated concrete station

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Kwsdpfx Aeirtdpod Njt This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) Kwodpfxofz U Tie Ad Nst For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Production Line for Concrete Blocks and Slabs – MASA (GERMANY) Year of Production: 2006 Technical Condition: Very Good Line Components: - MASA R9001XL single-feed vibropress - HAARUP B4500/1 mixer with skip - Stacking elevator Kwjdpfxev N Ru Ss Ad Njt - Multi-forklift - Conveyors for wet and dry line - Gripper for placing products on transport pallets - External pallet conveyor - Production pallet rack – 5200 spaces - 4000 wooden production pallets – plywood, dimensions 1200x1100x40 mm - Horizontal strapping machine

Year of construction: 1990, condition: good (used), Offered is a used row doser. Capacity approx. 20 m³. Manufacturer: Bertram. Weighing belt, 60 belt, length: 20.00 m. Dimensions substructure: H: 6,00 m, W: 2,30 m, H: 3,70m. Kwodpfxskq Dbto Ad Njt

Year of construction: 2024, condition: new, Dosing system Rad-Mobil Rowing device RD 1000 MOutput power up to 700 to / hDosing control up to 900 recipes1 x 4-fold rowing box 700 to hourly output at 4 chambers.Mixing plant for RC and aggregate for the production of mixed linessuch as antifreeze, gravel base course, factory mixed concrete aggregate, screed sand 2-8,Drainage filter layers, base courses for railway construction, recycling lines withAutomatic control for fast truck direct loading from the driver. Kwsdpfx Aedvm Agsd Not

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, We offer a used PENTA rumbling system for paving stones, Kwsdpfx Asrzt Nkod Nst year of construction 2002. Fully functional, very good condition.

Condition: good (used), Offered is a used screening plant Powerscreen Commander 1800. Kwjdonnz Tkepfx Ad Njt Screen deck, screen box, two piece conveyor belts, hood belt, 80 belt width, 4-cylinder Deutz engine, new hydraulic lines and connections, new electrical wiring. Fully functional.

Year of construction: 2018, condition: reconditioned (used), Conveyor belts Kwsdsu N Ndvopfx Ad Not Belt width 650 mm, 800 mm, 1000 mm, 1200 mm, 1400 mm. Length over 70 m Optional service aisles Rollers Motor

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Kwedpfx Aeuwrv Dsd Njt

Condition: excellent (used), A used Ratzinger impact mill D800 is being offered. 160 kW. Completely overhauled. Engine overhauled. Wear parts replaced. Steel construction included. Kedpfx Ajw H Savsd Nswt

Year of construction: 2003, condition: reconditioned (used), Overhauled machine Disassembled ready for transport in container (2) Anti-wear linings New bearings Ksdpfsizkxwsx Ad Nowt Passing capacity 160 Tm hour Motor from 50 kw to 150 Kw depending on needs. Current motor installed 75 kw

Year of construction: 2004, condition: excellent (used), Technical Specifications Fully automated wet blasting system Components to be processed Engine components, other components Rotary table size: Ø 1300 mm Rotary table speed: 1 – 30 rpm Rotary table load capacity: 500 kg Kwodpfx Aswi Hcwod Njt Max. component size: Ø 1500 mm and height: 1000 mm Number of blasting nozzles: 1 – 4 Blasting pressure: 0.5 – 6 bar (± 0.01) Cabin lighting Blasting media used: Al2O3 500 mesh as lapping media Blasting media feed system Feed pumps Maximum flow rate: 120 l/min at up to 35% concentration Aluminum oxide

Condition: good (used), MEA 160-2/3 drum mixer for asphalt plant Capacity: 160 tons per hour Kwjdpfxeybcc Aj Ad Nst

Condition: good (used), 6 hoppers / feeders with 40 m conveyor for asphalt plant Ksdpjyba Uvefx Ad Nswt

Condition: good (used), Asphalt mixer Ksdpjx U T T Tefx Ad Njwt Capacity: 400 tons/hour

Year of construction: 2013, condition: excellent (used), Dough mixer 4500/3000 Kodpsx Htb Uofx Ad Nswt

Condition: used, functionality: fully functional, Feeding chute with rubber-lined coating Mixing drum with paddles, diameter approx. 1,600 mm, length approx. 4,000 mm large production capacity simple and robust design Kedpfx Adexrn Ans Nswt on 2-axle trailer

Condition: used, functionality: fully functional, 2-shaft compulsory mixer Kwsdetrmvfspfx Ad Njt Working dimensions approx. 900 x 3,500 mm Electric drive with 132 kW motor and gearbox on a semi-mobile steel structure with new control panel

Year of construction: 2016, operating hours: 6,100 h, condition: ready for operation (used), functionality: fully functional, Terex Pegson Premiertrak 400 2016 year 6100 hours Inlet 1100x700 mmTerex Pegson Metrotrak 900x600 2016 year 6100 hours Inlet 1100x700 mm Engine Scania DC09 CSS range from 0-65 to 0-150 mm Capacity 150-250 tons per hour depend on material Kwodpfx Ajxvcdusd Nst Weight 45 tons Fitted with side conveyor Fitted with overband magnet Fitted with belt scale Machine in great working condition, ready for work like NEW

Year of construction: 2014, condition: like new (used), functionality: fully functional, Molds for machine producing concrete elements Kwodemmcfxepfx Ad Net - 30x30x5, 40x40x5, wave h=8, behaton h=6, block 20x20x6

Condition: excellent (used), Year of construction: 2007, Used Omag 1200x1100 block and paving stone production machine from 2007. Equipment includes: cement silo and auger, ACT/Wiggert 1875 L mixer, Eagle granulate coloring machine, Marcotte dosing system, Besser/Omag concrete transport system, Conv System concrete transport system, concrete feed hopper, Systeg block production machine (without face mix). Capacity of 2.8 to 3 cycles per minute. We produced products with heights ranging from 36 to 90 mm. Wet Omag conveyor (front), Omag material (slab) tipper, Omag elevator, Omag finger car, Omag lower conveyor, Omag gap closer, Omag dry stack conveyor, Omag cuber board feeder, Omag board and block conveyor, Omag Cuber, Omag board brush and flipper, Omag rear panel return line, Omag panel return line, Omag power supply panels, Omag hydraulic unit for wet side, Omag hydraulic unit for dry side, Siemens PLC controllers, steam generator. 1220 used plastic production boards, 1200x1100 mm (production area 1040x1040 mm). Kedpfxox Ty Sao Ad Newt

Year of construction: 1993, condition: ready for operation (used), A complete linked Hermetik slab press line Hanke with a Hermetik press is available. Product: concrete and building material slabs, pressing force: 600t, pressing process: dry, min. existing format: 400mm/400mm, max. existing format: 800mm/600mm, production capacity with 400mm/400mm slabs: approx. 96m²/h. Including conveying and circulation system, storage system, surface and post-treatment systems, blasting system for surface structuring, impregnation system, coating system, handling and automation technology, portal and gripper systems, direct washing, automatic stacking and transfer operations, packaging and further peripheral equipment. This is a complete 0-100 line. Documentation available. On-site inspection is possible. Kwedpfxex S Rbvo Ad Net

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation Kwjdpeu U Ad Rsfx Ad Nst 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3

Condition: new, Self-propelled concrete distributor. Hopper capacity: 2 m³, 3 m³, and 4 m³ (other sizes also available). Various options available, such as closed cabin, reversing camera, fully enclosed covers for the concrete auger, and slide valve. More information available on request. Kwodpfx Aox Ap Awjd Njt