Used Book binding machines for sale (496)

Condition: good (used), Renz ECL 700 electric wire comb closer Very good condition of the device, ready for production. Electric spiral crimper ECL 700: Electric crimping via foot pedal Binding up to 34 mm (340 sheets) in one cycle Djbswdrprj Hh H Tvokl Efficiency approx. 400 cycles/h depending on the type and format of the material Foot cycle start allows you to set the material with both hands Screws with a diameter of 3/16” – 1 1/2” regardless of the pitch Quick settings of different spiral diameters in a few seconds Quiet operation. The device does not require the use of a compressor Weight 70 kg Power supply 230 V Base included.

Condition: as good as new (ex-display), Bacciottini Group OXO MULTI SKILL, machine from showroom. OXO MULTISKILL is a compact creasing and folding machine with automatic non-stop loading feeder With few simple operations OXO MULTISKILL can switch from a normal creasing machine to a creasing/folding unit. Once in the folding machine mode after the fold type, sheet length and paper thickness have been selected, the machine adjusts automatically ready for production. Additional supplementary creases can be added along with ones necessary for the folding of a product. It allows a quick tool change over from the creasing to perforating just in a few seconds. TECHNICAL FEATURES: Minimum size in creasing: 8×10 cm | folding: 8×15 cm Maximum size in creasing and/or in folding 50×70 cm (with optional extension feeder 50×100 cm) – minimum and maximum size can change depending on the kind of fold Sheet weight in creasing: from 80 to 600 g.s.m. in folding: from 80 to 400 g.s.m.; from 0.08 mm to 0.4 mm of thickness – variable according to the quality of the paper Min. distance creasing 0.1 mm between creases | 0.1 mm from front edge | 0.1 mm from tail edge Production A4 in creasing: 9,000 sheets per hour (with 1 crease.) | in folding: 9,000 sheets per hour (with a single fold) Dob Hhov Rbkme H Tvokl Maximum number of creases 40 – possibility of doing a greater number of creases than those necessary to fold the sheet Power supply 400 Volt three phase + Neutral 50 Hz 4 Kw This machine from showroom is equipped by a standard V-shape creasing kit. All other optional tools are available and can be added to its equipment: -digital creation kit -standard perforating kit 2/1, 3/1, or 4/1 -micro perforating kit -extension feeder 100 cm

Condition: reconditioned (used), Year of construction: 2002, Casemaker Dkeb Hhswgaaks H Tvsl - board centre strip magazine - chopper for the center strip waste - device for automatic pasting and changing of endless spine strip with the machine running

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. Offline set consists of a machine for gluing cardboard books - 8 stations. Glue application from rollers. Separate press, machine for wrapping the cover. It is possible to buy a Wholenberg three-knife set with a set for rounding corners I will sell to the company that offers the highest price. Dob Hhjwf Rnvs H Tvokl

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 300, Bundler Dksb Hh Hewf D Hrs Tvol

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, The Kolbus DA-36 cover making machine is designed for the production of book covers. Main technical characteristics of KOLBUS DA 36: maximum mechanical speed, c/min - 36 format of the book cover, mm: maximum - 405×560 minimum - 110×155 width of the spine of the book block, mm: minimum - 8 maximum - 80 thickness of cardboard pieces, mm: minimum - 1 maximum - 4 thickness of flexible backing material, mm: Dsb Hhev Tk Ime H Tvokl minimum - 0.3 maximum - 0.5 thickness of rigid backing material, mm: minimum - 1 maximum - 3 Location: Ukraine. Year of manufacture: 1986

Condition: good (used), Screw bookbinding press Mahez 50×40 Manufacturer Mahez, Amsterdam, Netherlands. The device is fully functional, ready to work. Format 500×400 mm Pressure 2t Dkeb Hhewdrplo H Tvjl Weight 150kg

Condition: good (used), Year of construction: 2011, Unit for unwinding and feeding pre-products Year 2011 Dob Hh H Tjv Sddfsvskl

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, Wire-O Binding automatic paper punching machine for A4 & A5 sheets. Maximum Sheet Size 360mm x 330mm Minimum Sheet Size 138mm x 138mm Paper Stocks 50gsm up to 350gsm Punching Up to 30,000 – 40,000 sheets per hour Sheet Lift Adjustable from .5mm to 1mm Debjtx Ux Re Hh H Tvekl Power Requirements 230v single phase 50 Hz Other styles available: ie Coil Binding - Comb Binding - File Punching - Spiral Binding. (POA)

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, High speed creaser with SmartScreen touch screen technology Key product features: Dkjb Hh Howftble Tvol • 7" SmartScreen touch screen • 700mm x 500mm sheet size • Intuitive and easy to use • Fully automatic • Up to 16 creases per sheet • Takes stock up to 0.4mm (approx 400 gsm)* • Rule and matrix guaranteed for life • 6000 sheets per hour • Unlimited alpha numeric memory • Adjustable crease depth & square • Crease without cracking

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, year of last overhaul: 2024, Equipment: documentation/manual, Original Japanese line for the production of cardboard books. 16 gluing stations, presses, transfers, cover attachment, three-knife, corner rounding. Capacity up to 5,000 cardboard books per hour Special cardboard folding machines included Dkjb Hswfr Udoh H Tvel

Condition: used, CAM4KCL, Fairchild Imaging Inspection Camera Dkob Hh Hjq S Tgus Tvsl Model: CAM4KCL Condition: Used

Condition: good (used), Cyklos CCR 40 Corner cutter Production Czech Republic. Dkob Hh Howdrnzo Tvjl Very good condition. This is a professional device for rounding corners. Solid construction, strong pressure ensure precision of operation. Interchangeable knives. Adjustable margins. Large input. Installed knife with a radius of 6 mm.

Condition: excellent (used), Karl Krause iron bookbinding shears 140cm Dksb Hh H Tsudpfasvel Production Germany. Shears in very good condition, ready for production. All-iron construction ensures rigidity and repeatability of cutting. Cutting length of about 140cm Ideal for bookbinding cardboard, corrugated cardboard, leather and canvas. Front cutting stop with millimeter graduation. Material pressure by foot. Table margin HSS knives, very high.

Condition: used, Year of construction: 2005, KOLBUS High Capacity Three Knife Trimmer HD 150.B year 2005 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Standard equipment: - right hand infeed - standard cutting tables (no. 7 - 18) - knife setting gauge - cut counter Special equipment: - 2 sets of knife holders - 2 sets of knives Dkob Hovga E Ioh H Tvol Technical specifications: mechanical speed: up to 6.000 cuts/h feeding speed: up to 12.000 single products/h, thicker than 5 mm size range untrimmed max.: 310 x 400 x 80 mm size range trimmed max.: 300 x 388 x 80 mm size range trimmed min.: 100 x 120 x 2 mm stack height max.: 80 mm

Condition: good (used), Schmedt PraForm HHS 2100 Book Press with joint forming Book press with groove burner. Machine in perfect condition, purchased from the national library. Practically unused. Produced by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air. Deb Hh Hewdrmds Tvekl

Condition: good (used), Bookbinding press for gluing blocks MURO 5000 A4 TM Dkob Hhjwdrl He H Tvol Machine in perfect condition, practically new. Large gluing format, fast work. This is an original product, the highest quality. Production Muro, Germany.

Condition: good (used), Large screw bookbinding press 50x56cm The device is fully functional, ready to work. Manufactured by Hugo Peege, Leipzig, Germany. Dksb Hhowdrkce H Tvol The press has a tapping block that increases the pressing force. Pressure 5t Plate dimensions 500x560mm

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Dkeb Hh H Towdpdgevsl Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Weight 1500kg

Condition: good (used), Semi-automatic spiral binding machine Renz Autobind 700 III Machine in very good condition, ready to work. Efficient semi-automatic for the production of calendars, notebooks and other products bound in metal spirals. Fast operation Supports spiral diameters in the range of 3/16”-1 1/8” Working width up to 700 mm Crimping thickness approx. 23 mm Efficiency up to 1200 cycles/h Dkjb Hh Hswdpdas Tvsl The semi-automatic unwinds the spiral from the spool, counts the stitches, cuts the spiral to the specified number of stitches and transfers the spiral section to the crimping zone. The operator places a calendar with previously made perforation on the table The calendar is automatically transferred to the crimping zone after pressing the pedal. Power supply 230V + compressed air Weight 615 kg + cabinet with tools 300 kg.

Condition: good (used), Karl Tranklein ZP 39 two-station hydraulic bookbinding press The device is ready to work. The machine is like new. The press has a built-in hydraulic unit. Dkeb Hhewdpc Ao H Tvjl Two independent stations, single piston surface: 325x440mm Irreplaceable in the bookbinding shop when producing books, blocks, etc.

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Dobjwdpbrj Hh H Tvjkl Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator Device in very good condition. Includes perforation tool 3:1, square 4x4mm. Manufacturer’s description: Perforation device with a working width of up to 360 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf pater noster feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 2.4mm in one cycle Quick and easy replacement of perforation strips Possibility of using strips with / without a recess for the hanger. Quick format change by switching off selected needles without having to remove the strip Dkob Hewdpa Ush H Tvsl There is a shaker on the delivery. Power supply 230V Weight 720kg

Condition: good (used), Semi-automatic spiral binding machine Renz Mobi 500 Djbjwdpazs Hh H Tvekl Very good condition of the device. Semi-automatic device for crimping closed spirals by the German company RENZ: • Device controlled by a touch screen • The fastest change of settings for different work formats in this class of devices via the electronic panel, which is particularly important for small, frequently changing print runs • Setting the spiral diameter in the range of 1/4”-1 1/4” (6.9 -32.0 mm) using a knob • Hanger feeder • Quiet operation. The device does not require the use of a compressor. • Working width 105-500mm • Mobile devices, easy to move • Receiving conveyor included • Does not require special operator training 230V power supply Weight: 550kg

Condition: good (used), Curt Beier B500 bookbinding press for backing Manufactured in Germany. Djb Hhewdpaho H Tvjkl Perfect condition. Solid cast iron construction, strong pressure ensure precise operation. Jaw width 44cm Weight 40kg