Feeder

6293 - APPLICATOR Conveyor Applicator Feeder

Condition: used, Marvel Townsend StorkDMM50 meat bone separator to produce best quality low pressure deboned meat when used in conjunction with a Baader or SEPAmatic. This machine has come direct from a closed meat factory in Scotland. Almost impossible to find these machines on the used market. Kfsdpfx Afolkc I Rsfea

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. Kedpfofzb Niox Affjfa This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: new, No. 3187 Vacuum dryer / drying chamber ISVE ES 5 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1600 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 1100 mm Timber pile height: 990 mm Net wood volume: approx. 5 m3 Installed electrical power: 16,01 kW Average hourly power input: 8 kW/h Includes: - 12 electric heating plates (each 1100 x 5000 x 10 mm LWH / 57 kg / 1,25 kW) - 2 internal condensers (turbofan of 0,55 kW each 380 VCa with stainless steel pipes) - 1 one-way valve (clapet: one ¾” for vacuum circuit) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 5900 x 1620 x 2300 mm LWH Kedpfxevc Axpj Affjfa Weight approx. 2900 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Scanico Freezing Tunnel -Year of manufacture: 2017 -Freezing capacity: 50kW -External dimensions: 4100 x 3250 x 3200 mm -Belt width: 2 x 600 mm -Belt length: 4100 mm -Separate belt control possible -Refrigerant: R449A-freon -Maximum product height: 150 mm -Condition: Used in very good condition, ready to work -Technical documentation and manual available Refrigeration compressors system Bitzer -Type: S6F-30.2Y-40P (x4) -Volume: 101.4 m3/h (x4) -Cooling capacity for R404A: 165.6 kW at -25°C/40°C, 142.8 kW at -30°C/40°C, 101.2 kW at -40°C/40°C -Dimensions: 3150 x 1170 x 1920 mm -Condition: Used in very good condition, ready to work LUVE Condenser -Type: LMC6F 3542 V/H EC Ksdpfx Afoxfivcefefa -Cooling capacity: 247.2 kW -Number of fans: 4 x 630 mm -Dimensions: 5400 x 1110 x 1250 mm -Condition: In very good condition, fans tested, under nitrogen pressure

Condition: used, Year of construction: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Unit rated 9,3 kh/hour water evaporation capacity at 350°C maximum air inlet temperature. Drying tower has diameter approx. 1000 mm x 700 mm height of straight side x 1100 mm conical height. Includes (1) rotary atomiser CMT model AF07 driven by 0.7 kW IBAG motor, diameter of wheel 63 mm, speed range 10.000 - 60.000 rpm. Unit also includes 12 kW electrical air heater, cyclone, fan and main switchboard with integrated control panel. Kfodpfx Aeuk Ehxjffoa

Condition: like new (used), Vacuum filler Continuous vacuum filler for straight filling and portioning Filling mechanism: with rotary vane pump with 16 sliding rules, standard Hopper approx. 250 liters, with loading screw, dismantable, with limiter Built-in portioning computer PC Portion weight: 5 - 60.000 gr Filling speed: 0 - 100 % depending on type of the wrapper and portion size Steplessly adjustable filling speed VEMAG lifting device Built-in Kodpeu Ndlbefx Affofa Hydraulic leading Access also from backside Arm Nirosta for standard trolley according to DIN 9797, 200 liters volume Machine dimensions in cm: Width: 130,0 Length: 220,0 Height: 200,0 Installed power: 9,5 kW Voltage: 380 V, 50 Hz Weight: approx. 1 300 kg

Year of construction: 2016, condition: reconditioned (used), overhauled, delivery time by end of January 2026, 12-month warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Loading rails for charging the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric damper can be retrofitted upon request - Charging trolley available on request (see photo) - Documentation, CE declaration Kfsdpsvk Navefx Affja We are happy to offer installation and commissioning as an additional service. Inspection by appointment in our warehouse. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, tempering oven, pre-heating oven, tempering oven, drying cabinet, chamber kiln, curing oven, recirculating drying cabinet, recirculating oven

Condition: new, Year of construction: 2025, functionality: fully functional, Die von Peletto entwickelte Ölpresse WT-50 ist für die Herstellung von Öl im Kaltpressverfahren konzipiert. Die Maschine bietet eine Kapazität von ca. 6 Litern pro Stunde. Zu den Ausgangsstoffen zählen Leinsamen, Sesam, Schwarzkümmel, Sonnenblumenkerne, Sojabohnen und viele andere Ölpflanzen. Europäisches Produkt, Garantie, Ersatzteile verfügbar. Nettokaufpreis mit USt.Id.Nummer Selbstabholung oder Lieferung nach Vereinbarung. Es besteht die Möglichkeit, die Maschine vor dem Kauf zu besichtigen und zu testen. Ksdpowhw Nljfx Affefa Ich freue mich auf Ihre Anfragen.

Condition: reconditioned (used), Year of construction: 2013, Thermocontainer used; overhauled showing signs of wear Type designation: C-720ü Kfodsd Syhaopfx Affja Technical data Interior: 610 x 810 x 1440 mm Outside: 735 x 955 x 1770 mm Weight: approx. 90 kg Content in litres: approx. 720 With slide-in bars for grids Features Locking in the middle of the door 2 lateral pull handles 1 folding handle in the door recess Trolley with castors 108 mm, PA, cold store safe Door-stay Inner tray with slide-in strips Angular corner supports with bend PE - sheets (2 mm thickness), light blue Profiled deflector plates (3 sides) 2 rigid wheels, 2 mobile wheels, padlockable with padlock Loadable up to approx. 400 kg From company dissolution, REVISED Prices: net per piece plus the currently valid VAT. Fine cleaning is to be carried out by the buyer Auction consists of a container Colour sales depending on stock For time reasons, enquiries regarding this article can only be made to information of a telephone number can be answered. approx. 100 pcs. in stock Article is only offered for self collection. Do you wish a shipping, please contact us in advance by telephone

Condition: ready for operation (used), Technical characteristics tank 1000 mm tank length 4600 mm trays dimension 700 x 4000 mm height 700 mm max closed length 4700 mm Kfjdpfxst Hzvws Affea electric boiler programming example: wood thickness 45/60 mm initial humidity 35/45% plate temperature 45/60 C ° total time 90 H (manufacturer data cannot be committed) Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 4600 mm Width: 1000 mm Height: 1100 mm Weight: 1500 Kg