Used 3D Printers for sale (151)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, total length: 1,950 mm, total height: 1,790 mm, total width: 2,430 mm, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, power: 5.8 kW (7.89 HP), For sale is a BigRep-PRO, which unfortunately doesn't receive the attention and use it deserves and has become too large for our purposes. We purchased the device directly from the manufacturer, and everything has been serviced and maintained by specialists from BigRep GmbH, who took care of the machine so that we can hand it over with peace of mind. The only issue, as you can see in the pictures, is the pane on the left door, which we had to replace because the old one broke accidentally. However, it doesn't affect its functionality or anything else, just a cosmetic flaw. However, the entire device is still packaged in the manufacturer's film, which, as you can clearly see, is practically factory-made. Depending on our agreement, we can also include some filament (which is large for approximately 15 rolls). The device can be viewed and inspected on-site - appointments can be arranged. If you have any further questions, please contact us directly. Itsdpfx Asv In Hcoktsg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1904P201, Year of construction: 2019, No minimum price - guaranteed sale to the highest bidder! Maintenance regularly performed by BigRep GmbH technical staff TECHNICAL DETAILS Nozzle size: 0.6 mm Layer height range (for 0.6 mm nozzle): 0.1 mm – 0.4 mm max. output (with 0.6 mm nozzle): 16 mm/s Extruder: Two MXT extruders with 0.6 mm and 1 mm nozzles Printing area Build volume (X × Y × Z): 1,005 × 1,005 × 1,005 mm Layer height resolution: 0.1 mm – 0.8 mm Acceleration: up to 10 m/s² Printing technology: FFF – Fused Filament Fabrication (material extrusion) Printing materials: ASA, PA66 (other materials in development) Support materials: soluble plastics Max. print bed temperature: 99°C MACHINE DETAILS Printer (L × W × H): 1,950 × 2,430 × 1,790 mm Printer weight: 1,500 kg Installation requirements Floor: even and flat Safety distance: 2 m around the machine (when doors are closed) Required floor load: 500 kg/m² Operator: operator must be trained Operating temperature: 18°C to 25°C Relative humidity: 30 to 70% (non-condensing) Exhaust diameter: 100 mm Electricity Connection configuration: 3 × AC 400 V, 50/60 Hz Iodpfx Akewpqm Hetjtg Connections: CEE socket (400 V, 16 A), LAN network (RJ45) Input current: 16.0 A Power consumption: 5,800 W Safety certifications: CE certified EQUIPMENT - 15 rolls of large filament - Packaging: original manufacturer’s foil

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 300 h, Price is for the machine from the demo center, including additional barrel and second build platform. - Construction space 250*250*250 - Scan speeds up to 12 m / s - Layer thicknesses from 0.05 mm - Accuracy of +/- 0.1% over part length - Granite return frame - Control of key operating parameters - Pump fed replenishment capability - High performance vacuum overcoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB and Panasonic. The machine has an open material platform - consumables from all manufacturers can be sourced and processed directly. Iedpfehvim Eex Aktstg Transport; commissioning and consumables are not included in the price. The local UnionTech partner takes over setup, training and service!

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F370CR, Year of construction: 2023, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, Ex-display, like new. Available Now - Excellent Price! Composite-ready industrial FDM 3D printer with large build volume and soluble supports. Ex-display unit from 2023 in pristine, fully tested condition. Immediately available in Ostrava, Czech Republic. The prices includes consumables (NYLON-CF10, ABS-M30 IVR). What can the Stratasys F370CR do for you? ✅ Unmatched Precision & Repeatability Enjoy print accuracy up to ±0.2 mm. Built-in automation ensures stable printing with minimal waste. Itodpfjv Uv Eysx Aktsg ✅ Strong, Durable Parts Print high-performance parts reinforced with carbon fiber materials like ABS-CF10 and FDM Nylon-CF10 – ideal for replacing metal components. ✅ Complex Geometry Advanced soluble support materials allow for the seamless creation of intricate structures that would be difficult or expensive using traditional methods. ✅ Streamlined Workflow & Easy Integration GrabCAD Print™ makes print preparation simple and works directly with your CAD models. Upgrade to GrabCAD Print Pro™ or Insight™ for advanced optimization features.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: C362922, Year of construction: 2023, overall weight: 550 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, laser source model: Solid State BlueEdge, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Working area Working area (X): 300 mm Working area (Y): 300 mm Working area (Z): 500 mm Layer thickness: 10–100 µm MACHINE DETAILS Technology: Laser Stereolithography (SLA) Laser source: Solid State BlueEdge Scanning method: Galvanometer Isdpfxexu E H Nj Aktstg Input file formats: .stl, .slc, .nauta, .fictor, .mkr, .3dm, .3ds, .ply, .obj, .lwo, .x Operating conditions Operating temperature: 20–25 °C Humidity: 60 % Electrical data Power supply: AC 230 V / 50 Hz Power consumption: 500 W Dimensions & Weight Machine dimensions: 704 × 1,446 × 2,420 mm Weight: 550 kg EQUIPMENT Software Ports: USB / Ethernet Compatible with: wide range of DWS resins (transparent, technical, elastic, functional) Intuitive control and user interface

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Iodpoxu Ewzefx Aktetg Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 10100074, Year of construction: 2023, overall weight: 550 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 500 mm, laser source manufacturer: Solid State, Hardly used exhibition piece – used exclusively for short demonstration purposes! TECHNICAL DETAILS Technology: SLA laser stereolithography Working area: 300 mm x 300 mm x 500 mm Laser source: Solid State BlueEdge Layer thickness: 10–100 µm Scanning method: galvanometer MACHINE DETAILS Dimensions & Weight Dimensions: 704 mm x 1,446 mm x 2,420 mm Weight: 550 kg Operating temperature and humidity: 20 °C–25 °C / 60 % Power supply: AC 230 V / 50 Hz Power consumption: 500 W EQUIPMENT Itsdpjw I Da Ajfx Aktsg Software included Intuitive control and user interface Connections: USB / Ethernet

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Itjdpjxwpvgofx Aktjg Furthermore, a variety of materials is available for the machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, total length: 1,590 mm, total height: 2,130 mm, total width: 1,610 mm, type of input current: AC, input voltage: 230 V, input current: 30 A, travel speed (max.): 6,000 mm/min, space requirement length: 2,000 mm, space requirement height: 2,500 mm, space requirement width: 3,800 mm, Array – Your Solution for Industrial 3D Printing Production Array is a scalable platform for additive manufacturing, designed for the production of end-use polymer parts directly on your shop floor. Featuring integrated robotics, intelligent software, and high-performance FFF printing, Array reduces labor costs, increases productivity, and delivers series-quality components—on-site and exactly when you need them. Your benefits: Efficient & Cost-saving: Automated processes reduce personnel costs Fast & Flexible: High throughput for your production Industrial Quality: End products in series quality, available immediately Itedpjxl Ry Aefx Aktsg Act now: Discover our pre-owned Array systems—inspected, reliable, and offered at attractive prices. ✅ Request your quote now ✅ Immediately available—fast delivery

Year of construction: 2019, condition: as good as new (ex-display), ex demo HP 3D hardly used plus accessories located near London Itedpfxslgwb So Akteg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,200 h, High-end 3D printer for processing precious metals! TECHNICAL DETAILS Technology: DMLS (Direct Metal Laser Sintering) Build Volume Diameter: 80 mm Build Volume Height: 95 mm Layer Thickness: 20 µm Laser Type: Yb fiber laser 100 W Scanner: High-speed scanner, F-Theta lens Scan Speed: up to 7 m/s Beam Diameter: Laser focus >30 µm MACHINE DETAILS Dimensions & Weight Dimensions: 800 x 950 x 2,250 mm Weight: 580 kg Power Supply: 200-240 V Network Connection: Ethernet Machine operating hours: approx. 1,200 EQUIPMENT Software: EOS RP Tools, EOSPRINT Software license for silver powder Micrometer for height measurement 3 new steel build plates At least 4 used steel build plates, still usable USB key for software programs Iodpfsxfz Hgjx Aktotg Note: It is recommended to have the machine serviced before commissioning. The manufacturer offers this service for approx. €5,000 including possible spare parts.

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on EQUIPMENT Itsdpfx Akox I Rfaotjg Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: used, functionality: fully functional, machine/vehicle number: 370110, Year of construction: 2017, operating hours: 4,641 h, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 342 mm, table length: 342 mm, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, STRATASYS OBJECT 350 CONNEX 3 3D printer. Isdpfxjwnquuo Aktetg Note: sold without computer with corresponding software. Software: GrabCAD Materials: Rigid Opaque: VeroPureWhite™, VeroWhitePlus™, VeroBlackPlus™, VeroGray™, VeroBlue™, VeroCyan™, VeroMagenta™, VeroYellow™ Rubber-like: Agilus30™, TangoPlus™, TangoBlackPlus™, TangoBlack™, TangoGray™ Transparent: VeroClear™ and RGD720 Simulated Polypropylene: Rigur™ and Durus™ High Temperature Bio-compatible. Digital Materials: Digital ABS Plus™ and Digital ABS2 Plus™ in ivory and green Hundreds of vibrant, repeatable colors in opaque and translucent Rubber-like blends in a range of Shore A values and color Simulated polypropylene materials with improved heat resistance

Condition: refurbished (used), For Sale: EOS P395 – Guaranteed Working Condition This EOS P395 is fully inspected and revised by Inframotion 3D (IM3D) to ensure top performance. Equipped with a reliable Synrad CO2 laser, this machine is ideal for efficient SLS production. Included in the package: • 2 build frames • Water cooler Materials Highlight We offer a range of plug-and-play materials that are fully tested and optimized for use with EOS systems. Our Inframotion PA12 provides exceptional performance and offers significant cost savings compared to OEM powders. By switching to our materials, you can lower production costs without sacrificing quality or reliability. Services Included: • Transport & Installation: We ensure safe delivery in the original EOS packaging and provide professional installation. • Warranty & Maintenance Plans: Flexible options are available to meet your needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines and provide comprehensive support. As the only provider offering a complete solution for used EOS equipment, we deliver unmatched expertise and reliability. What we offer: • Expert service: Installation, maintenance, repairs, and upgrades by skilled ex-EOS technicians. • Exclusive materials: High-quality consumables like our plug-and-play PA12, tested and optimized for EOS systems, offering significant cost savings. Ijdpfx Akjq E I A Detetg • Complete support: From transport to tailored maintenance plans, we handle everything. Trust IM3D for dependable machines, premium materials, and the expertise to optimize your SLS production. Contact us today for more information or specific inquiries!

Condition: used, Designation: 3D Printer Selective Laser Melting Machine Manufacturer: SLM Solutions AG Model: SLM 280 HL Build Volume: 280 x 280 x 365 mm (minus substrate plate height) Machine Configuration: Single Optic, 1x 400W Materials Used: (1.4404, 1.2709, L40, AlSi10Mg) Itodjwpkcnopfx Aktog Laser Operating Hours: 1500 h Build Rate up to 88 cm³/h: depending on material and part geometry Variable Layer Thickness: 20 μm - 90 μm Minimum Feature Size: 150 μm Focus Diameter: 80 - 115 μm Max. Scan Speed: 10 m/s Average Shielding Gas Consumption during Build Process: 3.0 l/min (argon) Average Shielding Gas Consumption during Flooding Process: 200 l/min (argon) Electrical Connection / Power Consumption: 400 Volt 3NPE, 63 A, 50/60 Hz, 3.5 - 5.5 kW Compressed Air Requirement / Consumption: 60 l/min at 6 bar Machine Dimensions: 2600 mm x 1200 mm x 2700 mm Condition: Used item as shown in the pictures. Please contact us if you have any questions. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please request shipping costs outside Germany). Sale to commercial customers only, without warranty or guarantee. Technical data may vary and errors in the description may occur and are subject to change.

Condition: used, TECHNICAL DETAILS - Max. print size : 490 x 390 x 200 [mm] - Max. print volume : 38.22 [L] - Min. print thickness : 0.02 [mm] - XY accuracy : 0.03 [mm] - Materials : Thermoplastic Iedpfx Akjuhcbpotstg - Power supply : 110-240 [VAC] 50/60 [Hz] 1.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 1,400 x 1,260 [mm] - Machine height : 1.100 [mm] - Machine weight : 429 [kg]

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, type of input current: three-phase, nozzle diameter: 1 mm, Best large scale 3d printer we have ever purchased and has run 4 years without missing a beat, Super reliable with zero failed prints. Itsdpfx Akovblu Doteg New nozzle and new print bed just installed, ready for new owner.

Condition: like new (used), functionality: fully functional, machine/vehicle number: BC120058, Year of construction: 2022, operating hours: 260 h, As-new 3D scanner, model VL500 from Keyence, available at a competitive price. The device is in perfect working condition and will be offered for sale at the end of March 2026. The ideal cost-effective solution for surface scanning of technical components. Resolution: 0.001 mm; repeatability: 0.002 mm; measurement accuracy: ±0.01 mm. Original purchase price was over €80,000. Iodpfjx Dy Iajx Aktotg

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 525389e4-9874-4408-810c-82126df2811f, Year of construction: 2020, operating hours: 7,508 h, overall weight: 75 kg, inner dimension height: 180 mm, inner dimension length: 300 mm, inner dimension width: 220 mm, Equipment: CE marking, Hardly used showroom complete system consisting of the following components: Markforged Metal X 3D printer Markforged Wash 1 debinding station Markforged Sinter 2 industrial sintering furnace & additional accessories Markforged Metal X TECHNICAL DETAILS Build volume: 300 x 220 x 180 mm Printing process: Atomic Diffusion Additive Manufacturing (ADAM) Print chamber: Heated Build plate: Heated, vacuum-sealed, with automatic leveling Printing system: Dual extruders – metal material and release material Print materials: Stainless steel 17-4 PH, 316L, tool steel H13, A2, D2, Inconel 625, copper, titanium-6Al-4V Media supply: Filament feed, bound powder material Part Features Maximum part size: 250 x 183 x 150 mm Layer thickness: 50 microns and 125 microns MACHINE DETAILS Dimensions & weight Dimensions: 575 x 467 x 1,120 mm Weight: 75 kg Software: Eiger Cloud Printer power supply: 100–240 V / 50–60 Hz / 12.6 A Certifications: CE, FCC, UL, RCM, UKCA Safety features: Two-factor authentication, organizational admin access, single sign-on Itedpox I Rfgofx Aktsg EQUIPMENT Argon gas control with pressure reducers and quick couplings Original Markforged transport case with spare build plates Mobile castors Isolation transformer

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2022, total length: 129 mm, total height: 198 mm, total width: 90 mm, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, input frequency: 60 Hz, ambient temperature (max.): 29 °C, Bring the speed, agility and design freedom of advanced additive manufacturing to your business while gaining the latest advances in FDM® technology. The Fortus 450mc™ 3D printer builds high-requirement functional prototypes, rugged manufacturing tooling and custom production parts in its large 406 x 355 x 406 mm (16 x 14 x 16 in.) build envelope. Fourteen Stratasys Preferred Materials1, multiple Stratasys Validated Materials2 and soluble support address a wide variety of applications. Iedpewx H Edsfx Aktstg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Isdpfxsxu E Srj Aktotg Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: excellent (used), functionality: fully functional, machine/vehicle number: G3700003, Year of construction: 2019, operating hours: 1,022 h, Ladies and Gentlemen, We hereby sell our Stratasys Objet260 3D printer. It comes with everything needed for operation (including user maintenance), except printing material and support material. Included accessories: Demo set sample prints Poster color print demo set Demo set USB sticks Software 2x print head wiper 2x WiperBlade BuildTray sensor Various wear parts 2x UV lamp bracket UV reflector with lamp Vacuum hose Waste container Waste container small Wiper blade Tool set Nozzle ruler Accessories exhaust air connection Connection cable accessories Itedpfx Ajtu Uvzekteg Drip trays Print head calibration Print paper Overhead foil Calibration Sandpaper UV lamp cleaning KVM switch Transport lock + connection cable Accessories UV lamp calibration Scale for print head calibration I will be happy to send you pictures and/or article numbers from the manufacturer on request. If you have any questions, please do not hesitate to contact me.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: K00219, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submitting a bid obligates the bidder to collect the item by 14.01.2026! TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Volume cassettes for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Z accuracy: −0.000 / +layer height Ijdpfsx Hwgnjx Aktjtg MACHINE DETAILS System dimensions: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Network connection: 10/100 Base-T Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ Software Control Center™ Software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of four cassettes requires servicing.

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Ijdjrm Tdwepfx Aktjtg Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: FPR3016042306000126, Year of construction: 2023, overall weight: 530 kg, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Equipment: CE marking, 3D Printer for High-Performance Composite Materials! Hardly used showroom model – used exclusively for short demonstrations! TECHNICAL DETAILS Build volume: 525 x 400 x 400 mm Technology: FFF + CFF (Continuous Fiber Fabrication) Heated build chamber: up to 200°C Compatible materials: Onyx, Carbon Fiber, Glass Fiber, Kevlar, ULTEM 9085 Layer thickness: 50 μm to 250 μm Accuracy: +/- 0.0015 mm per mm Software: Eiger MACHINE DETAILS Itedew I Dmiopfx Aktog Dimensions & weight Dimensions: 1,325 x 900 x 1,925 mm Weight: 530 kg Certifications: CE, FCC, UKCA, ETL, CSA Compliance: UL 2011, NFPA 79, CSA C22.2#301 Safety certification: IEC/UL/CSA 62368-1, CE Marked Connectivity: Ethernet, Wi-Fi Power supply: Multi-voltage 200–415 V, 50/60 Hz, three-phase EQUIPMENT Original packaging Technical documentation Printing system: Direct drive with three nozzles (two for plastic, one for fiber)