Dies for outer thread

1 Posten UNC

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) Iedpfewbil Sjx Akxjtf ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Control system brand: HACO - Control system type: BC59T Graphics - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 250 - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Crowning system: CNC-controlled - Punch holder: Quick-release - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Itedpfx Aksxrl Hdoxof Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos Itodpjtzf N Rjfx Akxef -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Itodpfx Aksmzbr Sexjf Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine Isdpfx Akjfg Rlcjxotf with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Itodpfsxgdlnjx Akxef Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: used, Technical details: turning diameter over bed: 320 mm turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm Itedpfx Asu Ixy Djkxsf -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: used, Dimensions (HxWxD) 1700x1020x800 mm Ijdpfxjwqg Sus Akxjtf

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Iodpeuigzpjfx Akxjtf Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, Itodpfofx Hv Hex Akxjf various accessories