DRIVE

Yaskawa

Condition: used, Year of construction: 2019, functionality: unexamined, overall weight: 3,500 kg, load capacity: 280 kg, controller model: DX200, teach pendant manufacturer: YASKAWA, Complete Yaskawa Motoman multi-robot system manufactured in 2018/2019. The system consists of two Yaskawa MH280 II heavy-duty robots, one Yaskawa MH50 II, and three original DX200 controllers, including robot cables, energy guidance systems, and mounted end-of-arm tooling. The system comes from an industrial automation application and is particularly suitable for handling, palletizing, loading and unloading, and material flow processes. All components are in well-maintained used condition. Dedpfx Aozkt Uaoahokp Scope of supply: * 2 × Yaskawa Motoman MH280 II * 1 × Yaskawa Motoman MH50 II * 3 × Yaskawa DX200 controllers * Robot cables * LEONI DressPack energy guidance system * Gripper/handling units * Documented assignment of controllers to robots Scope of supply: * 2 x Yaskawa Motoman MH280 II robots * 1 x Yaskawa Motoman MH50 II robot * 3 x Yaskawa DX200 controllers * LEONI energy guidance systems * Robot cables * Gripper and handling units * Mounted baseplates Robot 1 Manufacturer: Yaskawa Motoman Type: MH280 II Model: YR-MH00280-J00 Year of manufacture: 01/2019 Payload: 280 kg Axes: 6 Weight: approx. 1,280 kg Power supply: 400 V AC, 3-phase, 50/60 Hz Power consumption: approx. 6.0 kVA Shipping dimensions: 1,800 × 1,200 × 2,100 mm Shipping weight: approx. 1,200 kg Robot 2 Manufacturer: Yaskawa Motoman Type: MH280 II Model: YR-MH00280-J00 Year of manufacture: 01/2019 Payload: 280 kg Axes: 6 Weight: approx. 1,280 kg Power supply: 400 V AC, 3-phase, 50/60 Hz Power consumption: approx. 6.0 kVA Shipping dimensions: 1,800 × 1,200 × 2,100 mm Shipping weight: approx. 1,200 kg Robot 3 Manufacturer: Yaskawa Motoman Type: MH50 II Model: YR-MH00050-J00 Year of manufacture: 11/2018 Payload: 50 kg Axes: 6 Weight: 550 kg Power supply: 400 V AC, 3-phase, 50/60 Hz Power consumption: 4.0 kVA Shipping dimensions: 1,500 × 800 × 1,700 mm Shipping weight: approx. 500 kg Controller 1 Manufacturer: Yaskawa Type: DX200 Master Controller Year of manufacture: 04/2019 Power supply: 400 / 415 / 440 V, 50/60 Hz Power consumption: 5.0 kVA Shipping dimensions: 1,200 × 800 × 1,800 mm Shipping weight: approx. 200 kg Controller 2 Manufacturer: Yaskawa Type: DX200 Slave Controller Model: ERES-MH00050-E10 Year of manufacture: 04/2019 Associated with: MH50 II Power supply: 400 / 415 / 440 V, 50/60 Hz Shipping dimensions: Europallet Shipping weight: approx. 200 kg Controller 3 Manufacturer: Yaskawa Type: DX200 Slave Controller Model: ERES-MH00280-E12 Year of manufacture: 04/2019 Associated with: MH280 II Power supply: 400 / 415 / 440 V, 50/60 Hz Power consumption: 5.0 kVA Shipping dimensions: Europallet Shipping weight: approx. 200 kg Shipping data for the complete system Packages: 6 Total weight: approx. 3,500 kg Transport volume: approx. 18 m³ Loading method: Forklift loading possible.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,670 mm, travel distance Z-axis: 500 mm, number of axes: 4, This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Dsdpfx Aex D D Hmsahskp • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depends on clamping system) • Operating terminal on left side of machine • Hand terminal with axis speed control and emergency stop • Software: Woodflash (CNC board, tool database, program editor) • Positioning display for workpiece support and vacuum suction cups • Vacuum connection for template milling (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction power 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-station linear on left side of machine stand, incl. pickup space for aggregates; max tool diameter 250 mm; max tool length 240 mm • Drill head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling length 70 mm; shank Ø 10 mm • Groove saws: 2 (one X, one Y); max blade Ø 120 mm; max thickness 5 mm; continuously variable speed up to 7,500 rpm • Safety: front light barrier system

Year of construction: 2019, condition: good (used), Sturm Coating System Description: For sale is a used coating system manufactured by Sturm, formerly used at the Mercedes-Benz plant in Hamburg for processing rear axle carriers. Technical Data & Scope of Supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift (condition consistent with age) System components: Processing units, drying and cooling zones, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal after-treatment / exhaust air purification system (VeniaKab / RNV) Condition Notes: Control technology: According to plant maintenance, it is state-of-the-art Electrical & mechanical systems: Mostly in good condition consistent with age Cybersecurity data erasure: For security reasons, all hard drives from the robots and PC-based stations have been removed Dismantling from the Hamburg plant Dismantling and removal must be carried out entirely by the buyer "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Dksdpfszka Sfex Aahop You can find more items—new and used—in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: Serial No. 130594, load capacity: 100 kg, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Motoman, Equipment: documentation/manual, Complete Yaskawa ES165D-100 robotic palletizing cell with DX100 controller For sale is a complete, fully functional palletizing cell, which is currently still in use in our production and can be inspected under load by appointment. The system is used for the automatic palletizing of cartons (packages) containing snack products and is fed by two infeed lines. Scope of delivery: Yaskawa Motoman ES165D-100 (100 kg payload) Yaskawa DX100 controller Dkjdpozi Ay Aefx Aahjp complete control cabinet gripper system protective enclosure / safety fences two vertical conveyors two discharge conveyors complete palletizing cell Technical data Year of manufacture: 2013 Robot: Yaskawa Motoman ES165D-100 Controller: DX100 Payload: 100 kg System currently in production regular maintenance performed and documented Optional An end-of-line packaging machine from Meurer can also be offered. Dismantling and transport are to be organized by the buyer. An inspection of the operating system is possible by arrangement.

Condition: used, Year of construction: 2021, MEGA 300 TS Numerical Control Panel height 60 mm PVC/Abs mm 3 Feed speed up to 22 m/min Working height adjustable electronically by C.N. Motorized rubber belt with higher pressure Introduction system for small panels Panel support guide with electronic adjustment by C.N. Side roller conveyor with idle wheels for panel support Anti-adhesive group Dedpfx Ast Hal Dsahokp Rectifier unit with two motors electronically adjustable by C.N. Roll holder plate for delicate edges Edge magazine with 2 positions Gluing unit for EVA glue with glue tank and pre-melter Edge pressure group on straight profiles with pressure rollers electronically adjustable by C.N Non-stick group Trimming unit with 2 motors with automatic inclination adjustment Trimming unit with 2 superimposed motors Trimming / gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 motors Edge scraper unit electronically adjustable by C.N. Glue scraper unit Oscillating brush group Hairdryer group

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: ES165D NX100, overall weight: 1,100 kg, load capacity: 165 kg, arm reach: 2,651 mm, controller manufacturer: YASKAWA-Motoman, controller model: NX100, teach pendant manufacturer: Fanuc, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. Reliability as Standard 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: YASKAWA - Motoman Type: ES165D Controller: NX100 General purpose: Heavy payload, floor-mounted Payload: 165 kg Reach: 2651 mm Robot mass: 1100 kg Delivery time: To be agreed upon Dkjdpeyb Skvsfx Aahop IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL color. Includes Accuracy Status Measurements (repeatability, accuracy, backlash) About: Our daily business is the reliable delivery of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Established in 2002. We ship worldwide.

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Gear motor: from SUGA type STS-2 automatic lathe -Motor: Yaskawa type FELQ-7T -Power: 3.7 kW -Engine speed: 705/1340 rpm Dkodpfsfnln Djx Aahep -Gearbox: Suga type SGM-1 -Speed switchable gear 16 stages: 145 -1600 rpm -Shaft: Ø 30 x 80 mm -Dimensions: 945/360/H480 mm -Weight: 233 kg

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Year 1994 Dksdorm Rxwspfx Aahjp V 380/50

Condition: used, Torque assembly station, torque module, assembly device, torque wrench, torque wrench, torque wrench -Torque module: for mounting water meters or other screw connections -Frequency converter: from Yaskawa type VARISPEED 616G5 -Mounting device: for water clocks -Speed and torque: adjustable -various Recordings: for water clocks -Dimensions: 1500/650/H2060 mm Dksdpfjcm I T Tox Aahsp -Weight: 314 kg -The two geared motors each have a power: of 1.5 kW and a speed of 38 rpm -Dimensions: 880/600/H920 mm -Weight: 132 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Yaskawa, Servo rules -Type: VZAB0P2BAA -Frequency converter: Type: CIMR-VCBA0002BAA -Power: 0.37 / 0.25 kW -Input: 200-240 V 50/60 Hz 3.6 / 2.8 A -Output: AC 3PH 0-240 V 0-400 Hz 1.9 / 1.6 A Dksdehagpvopfx Aahop -Dimension box: 190/150 / H150 mm -Weight: 0.8 kg

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min Dedpfx Aoyq Szteahskp - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: defective spare-parts repository (used), Intended for use as a spare part. The drive mechanism is not functioning. Dsdpfxozibyue Aahskp

Condition: used, Year of construction: 2017, Used Yaskawa industrial robot, model MH-50-35, in good condition, with DX100 controller. Dedpszia Hgefx Aahokp

Condition: used, Year of construction: 2004, functionality: fully functional, number of slots in tool magazine: 7, spindle motor power: 6,600 W, 3 AXIS machine Vacuum pump 100 m3 Electrospindle 6,6 kW motor power Dodpfx Ajwhvwnjahekp Routing unit + Saw aggregate Drilling unit 10 +4 (10 vertical + 4 horizontal) ISO 30 router chuck Manual lubrication Monitor 15" XILOG PLUS Software Windows XP Machine is still working at Sellers, video of machine in working mode available on request

Condition: used, Year of construction: 2018, Used Yaskawa industrial robot, model MH-24, in good condition, with DX100 controller. Dsdpfjzia Ecjx Aahskp