Oscillating beam

YALE (2 stuks) 100 kg 12.250 x 6.500 mm

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm 0 8.0 m³/h tool adaptor Kranöse 80.0 mm voltage 400 V total power requirement 0.18 kW weight of the machine ca. 120 kg dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse Dsdpfoxak Ddsx Ailjcn - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Condition: ready for operation (used), Year of construction: 2025, A relatively new double-girder overhead crane Konecranes is available. Load capacity: 12t. Documentation available. An on-site inspection is possible. Dcodpfoy Anuhsx Ailsn

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Dsdpepwgr Hjfx Ailjcn Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Dcsdpfx Aijw Ekfujlsn Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Dcjdpfjt Hw Aysx Ailsn Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, ----- Dsdpfxeyl Ubfe Ailocn

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Dcedpfxjy D Ug Hs Ailon

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each Djdpfx Aisx Riccjlscn - Volt 400/50 - S/N AA0985 - Year 2001

Condition: new, Year of construction: 2026, Mast Pallet Stacker P513 – Manual Lifting Truck with 500 kg Capacity The P513 mast pallet stacker is a high-quality manual lifting device designed for precise lifting and transporting of heavy loads. Thanks to its robust steel construction and a load capacity of 500 kg, it is a reliable solution for warehouses, shops, and loading or unloading operations in delivery vehicles. With its innovative design, the truck combines functionality with safety, ensuring efficient and secure handling of various loads. Main Advantages of the P513 Mast Pallet Stacker Load capacity up to 500 kg – ideal for transporting medium-sized goods, including pallets and other loads in warehouses, shops, and during unloading operations. Lifting height of 1300 mm – allows easy lifting of loads to medium heights, making it easier to place goods on shelves or load delivery vehicles. Precise lifting thanks to a specialized foot pump – the truck is equipped with a mechanism enabling stepless fork lowering, providing full control over the lifting height. Adjustable fork width – adjustment range from 220 mm to 560 mm allows easy adaptation to different pallet sizes, increasing the versatility of the device. High-quality materials and construction – the steel frame ensures long service life and resistance to mechanical damage, allowing reliable operation in demanding working conditions. Polyurethane wheels and rollers – provide quiet and smooth operation, even on uneven surfaces, improving mobility in difficult environments. Overload protection valve – protects the device against damage caused by excessive loads, increasing operational safety. Ergonomic handle – ensures comfortable and safe maneuvering while reducing operator fatigue. Dsdpfjricqnsx Ailocn Construction and Technology of the P513 Mast Pallet Stacker The P513 truck is equipped with a strong steel construction that provides stability and durability during everyday operation. Thanks to the hydraulic lifting system with a foot pump, the truck allows precise lifting and lowering of loads, making it ideal for intensive warehouse applications. The adjustable fork width range of 220–560 mm enables adaptation to different pallet dimensions, while durable polyurethane rollers ensure smooth operation on various surfaces. Additionally, the truck is equipped with a parking foot brake, providing stability during work interruptions, and an overload protection valve that safeguards the device against damage. Standard Equipment of the P513 Mast Pallet Stacker Hydraulic lifting mechanism with foot pump for stepless fork lifting and lowering Adjustable fork width from 220 mm to 560 mm Steering wheels: 120 × 50 mm Polyurethane fork rollers: 70 × 30 mm Parking foot brake ensuring stability during operation Overload protection valve preventing equipment damage Ergonomic handle for easy maneuvering Technical Specifications Parameter Value Load capacity 500 kg Lifting height 1300 mm Fork dimensions (L × W) 850 × 110 mm External fork width 220–560 mm Height with lowered forks 1610 mm Height with raised forks 1610 mm Minimum fork height 85 mm Overall length 1380 mm Overall width 570 mm Turning radius 1100 mm Steering wheels 120 × 50 mm Fork rollers 70 × 30 mm Weight 105 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Automatic sawing center for PVC profiles, consisting of an infeed buffer, an outfeed buffer, and the main machine, model Thorwesten ASZ 4. Processing length 6,500 mm, max. profile width = 165 mm, max. profile height = 165 mm, Schüco system. Continuously variable cutting angles from 45° to 135°. Automatic optimization and processing of cut-offs. Saw blade diameter 500 mm. Includes dust extraction system and waste conveyor belt, as well as an elevating conveyor. Dcsdpfxsz Dk Ets Ailsn WINDOWS 10 operating system. Profile measuring device. Label printer. Two-bag dust collection system. Extended infeed and outfeed buffer depth.