Multiple combined machines

WINTER K5 320-1500

Condition: excellent (used), mandrel diameter: 30 mm, Equipment: motor brake, Table milling machine SCM type T130 with four roller feed unit, table size 1200x730mm, max. Speed 10.000/min, spindle D=30mm. Motor 5.5kW A spindle D=40mm can also be supplied at an extra charge. Fgsdpet Rfn Esfx Ab Tjk

Condition: new, machine/vehicle number: NEW-1, empty load weight: 585 kg, maximum load weight: 2,115 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, Year of construction: 2024, New series rear tipper! Tandem axle, braked rear tipper high loader, with aluminium drop sides that can be folded down and removed on all sides, wooden floor covered with steel sheeting, welded and hot-dip galvanized steel frame, automatic jockey wheel, 6 lashing rings on the sides in a V-groove, 13-pin electrical system with reversing light, hydraulic hand pump, low chassis. Plus freight to Gera and vehicle registration document: €200 Optional accessories available at extra cost: electric operation, mesh sides, tarpaulin and bows, 100 km/h equipment, etc. Fgedpfx Aoghpdieb Tsk Delivery available at extra cost! Financing / leasing possible Pictures for illustration purposes only!!

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Fsdpfxowrb U Ts Ab Togk

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Fedpfxotxh Nie Ab Togk

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: manual Saw blade angle display: Scala Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Fodpfx Aetnggyeb Tsgk Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: new, Year of construction: 2025, Combined saw-milling machine minimax st 3c F 16 Fgsdpfx Aohp Rdljb Tjk Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Fgedpfehfufgsx Ab Tjk -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400 x 760 mm Feed speed 7 m / min Working height 4 - 220 mm Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Fedpfxog S Nx Ds Ab Tsgk Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: as good as new (ex-display), Block band saw Hauslhof CTR800Hydraulic, Fgedpfx Ajvrvrnob Tek Demonstration machine, Block diameter up to 830 mm, Total length 5800 mm, width 2300 mm, with hydraulic system for tensioning, clamping, turning and lifting the block Total engine output at 100% ED 10 Kw Includes: CTR800H-Ver3 CTR800H-KSD CTR800H-STH CTR800H-STH-V CTR-SSP CTR-11 CTR-VOR CTR-AMP CTR-EGL CTR-LG Automat CTR-Pump-EA

Condition: excellent (used), Catalogue number 7211 TECHNICAL DATA JOINTER: - shaft width: 400 mm - 3-knife cutter block - table length: 2000 mm - fence Fgedpfx Ajqwy Dtjb Tok THICKNESSER: - max workpiece thickness: 140 mm - thicknesser shaft guard from above: – anti-kickback fingers – grooved feed roller – cutter block – smooth outfeed roller DRILLING MACHINE: - max tool diameter: 16 mm - max drilling depth: 170 mm - max drilling width: 200 mm - adjustable table (up/down, forward/backward, sideways) - table dimensions: 560 x 270 mm - material hold-down CIRCULAR SAW: - max blade diameter: 300 mm - max cutting height: 80 mm - blade arbor diameter: 30 mm - blade adjustable up/down - cutting width with fence: 120 mm - table dimensions: 1010 x 550 mm - with table-mounted sliding carriage - motor: 2.2 kW - dimensions (L/W/H): 2000 x 2340 x 1200 mm - weight: 895 kg ADVANTAGES – Made in Italy – Very good condition – Used multifunctional machine Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at 4.2 PLN/EUR (price is subject to change with significant exchange rate fluctuations)