Suction

WINTER DUSTMAX III

Condition: used, Year of construction: 1999, throat 290 mm bore stroke 160 mm total power requirement 1,9 kW Gjdpfxjw En D Uj Aa Eeiw Description to follow!

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey Price: On request - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes Giedpfx Aaeyll Sns Eew - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Giodpfxshpmaws Aa Esw Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Gisdsi Hn Srspfx Aa Ejw Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Giodpfjh Txmtox Aa Eow

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. Gedpfx Ajudaazja Ejiw They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Width stop display: Scala Cutting ruler display: Scala Saw blade diameter: 300mm Speeds: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Milling arbor height and tilt adjustment: handwheel Gedpfx Aastpivko Esiw Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 3000 mm Cutting depth: 125 mm Scoring cutter: yes Sawblade height and tilt adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: scale Giedpfxewhuuxe Aa Ejw Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 400 mm Speed: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Mill arbor pivoting: yes 0 - 45° Mill arbor height and tilt adjustment: handwheel Mill arbor height and tilt indicator: scale Mill arbor: 30 mm Mill arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. tool diameter: 180 mm Motor power / milling cutter: 4.4 kW Extraction connection: 100 mm, 100 mm, 80 mm Machine length: 2500 mm Machine width: 1500 mm Weight: 800 kg

Condition: like new (used), Year of construction: 2023, For sale is a used Felder A7-41 surface planer with a planing length of 2000 mm. The machine is in mint condition and has been refurbished and checked by our specialist staff. (Fully functional) - Silent Power spiral cutterblock - Planing width 410 mm - planing length 2000 mm - max. passage 230 mm - electric thickness adjustment PowerDrive - Extractable Ø 120 mm - motor power 4 kW / 5.4 HP - year of construction 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknessing machine, planing machine, planer, thicknessing Reference: R-A1486 Gijdpfst D Aiysx Aa Esw

Condition: new, Panel swivel cart new Gsdpfsw I U A Ijx Aa Esiw suitable for Fimal Concept 350 pressure beam panel saw complete including 4 swivel castors (2 lockable) 12 all-direction rollers and a foldable support table Availability: short-term Location: Hochheim