Exhausting system

WINTER CLEANER ECO-6500

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fully automatic electronic control with program selector switch RINSE-GLUE-GLUE/DRIVE - Dowel feed via electronic vibrating conveyor with potentiometer for stepless adjustment of the dowel feed rate - Closed glue system with 6 bar glue pressure via glue nozzle - GLUE/WATER selector switch for rinsing/cleaning the glue system with EasyClean function button (automatic cleaning program for glue hose and glue nozzle via spray funnel and dirty water collection container) Hodpfx Ahjv Aubpj Nefb - 1 stainless steel container for 7.5 kg glue, as well as 1 stainless steel container for 7.5 l water for rinsing/cleaning incl. 1 gun for dowels Ø 8 mm Dowel length 25 - 40 mm Glue/dowel driving tool completely overhauled and no longer used

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 223A011643003, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-12 mm Year: 2016 Machine-No.: 223A011643003 Condition: Refurbished Features: ⦁ ASLF Anti-Strap-Loss-Function Permanent strap control ⦁ Automatic strap feed ⦁ Strap width 5 - 12 mm, optional ⦁ DAT Direct-Access-Technology Torque-controlled retraction force, adjustable ⦁ Adjustable transport speed ⦁ Machine mobile Hodpfoukvgrox Ah Nsfb ⦁ Table height continuously adjustable ⦁ Package flow monitoring Special features: • Right machine (viewed in the direction of conveyance) • EMERGENCY STOP button in the Easy Control control unit • Signal exchange: 2 x mating connector with tool • Additional light barrier for attachment to the front or rear conveyor • Signal exchange: Do not strap the package. To the front-running machine • External button: Do not strap the package • Strap tension dependent on the package height (laser sensor) • Pneumatic package press (600x600) • Double press beam 600 • Feed protection on the table top, inlet side

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Hodpfx Ahjhpmawj Nefb Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: new, Year of construction: 2025, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Hsdpfx Aod Dczzoh Njfb Please don't hesitate to contact us.

Condition: new, Year of construction: 2020, Machine type K2 2.0, new machine, as new, the machine bears the CE label, automatic, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 150/1250 mm, working height 3/50 mm, working length 270/5000 mm, feed speed 25 m. per minute, motor size 5 kW, with 4 tool holders, tool mountings: ISO30, blade diameter 100 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm.. Hjdpfx Ahsh I Nd So Nsfb +Machine is also bought with software for TPA codes +Licens for programming on external PC

Condition: used, SCM Tech 99L Machining center Transport dimensions: Hfjdjtxdqcjpfx Ah Njb mm 4,800x 230 h. 260 weight 2800 kg

Condition: new, Year of construction: 2021, Machine type K2 2.0, new machine, the machine bears the CE label, automatic, with CNC control, the machine has 4 axes, flow processing machine, with air pressure cylinder for holding item, works beneath the item, working width 1250 mm, working height 50 mm, working length 6000 mm, motor size 5 kW, the machine's motors are rated at 400 volts, motor rpm 1200/2400 per min., with 4 tool holders, tool mountings: ISO30, feed speed 25 m. per minute, tool diameter max. 35 mm., tolerance precision +/- 0.15 mm, number of drill spindles 20, maximum bit length 43 mm., air consumption: min. 7 atmospheric pressure, complete with some accessories. Hsdpfx Ajh Izk Ush Njfb

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Hedpfoum H Ekjx Ah Nefb Total number of tool changer positions: 13

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 223A011235001, warranty duration: 12 months, frame height: 600 mm, frame width: 600 mm, Equipment: documentation/manual, Arch Size: 600 x 600 mm Strap width: 5-9 mm Year: 2012 Machine-No.: 223A011235001 Condition: Refurbished Our latest project was the refurbishment of this fully automatic strapping machine SMB CUBE 600x600c from 2012. You might be able to see from the outside and from the price that this CUBE is a second-hand machine, but when you look at the list of spare parts and labour hours used, it becomes clear: this machine has been extensively refurbished to its original condition and is now as good as new; perhaps even a little better. As good as new with the CUPASO refurbishment With our reconditioned used machines, you get as-new technology at used machine prices. We make sure that we only refurbish technology that still meets today's requirements. This also applies to the SMB CUBE 600x600c offered here. We also offer you our comprehensive service for this refurbished device. In addition to our 12-month guarantee, this includes the long-term supply of consumables, spare parts and technical service. Prepared for integration into automated packaging lines Even as a stand-alone machine, this CUBE can be customised to your requirements. The machine detects incoming parcels or product stacks and straps them once or several times according to the previously defined parameters. With the help of the pneumatic package press and the package height-dependent strap tension, packages of different sizes and characteristics can be processed unsorted and individually. By adding a machine of the same design, which is also available from us, it is even possible to realise cross or multiple strapping at high speeds. This is what we promise Our guarantee commitment of a full 12 months of course also applies to our SMB CUBE 600x600c. This means you are on the safe side. If something should break during this period, we will replace the defective component and install it at our expense (excluding wear and tear and travel). And if you decide quickly, you will receive our exclusive pre-sale discount of 10%. Do you have any questions? We look forward to your call or e-mail and will be happy to show you our current projects and new equipment in our showroom. Why don't you come and visit us? Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Simplest handling • Minimal space requirement • Best cost/benefit ratio Hfsdpfxet Uzv To Ah Njb • Max. 35 parcels/min; depending on back-tensioning path and frame size, without package pressing • Mobile machine (2 fixed/ 2 steerable rollers with brake) • Table height 770 -1000mm • Driven conveyor belts • Machine colour: Frame RAL 7004 / Frame RAL 7016 Special features: • Signal exchange: 2 x counter plug with tool • Additional light sensor for mounting on leading or following machine • Signal exchange: Do not strap package • External button: Do not strap package • Package height-dependent belt tension (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Draw-in protection on table top, infeed side

Condition: new, Year of construction: 2024, lifter boy for loading sheet metal on laser machines easy operation ( vacuum pump are in the control unit) no cable by loading laser machine vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal. Hfodpfx Ahjlcd Sdo Njb