Tipper semitrailer

WIELTON Bulk Master 3-Achs-Kippsattelauflieger 47 cbm

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width: 10402 mm Bed length: 8585 mm Total width: 2550 mm Total height to upper frame: 3550 - 3600 mm Total height to tarpaulin peak: 3710 - 3760 mm Track width: 2040 mm Kingpin–2nd axle distance: 6120 mm Fifth wheel height: 1200 mm Axle spacing: 1310 mm Rear overhang: 1367 mm Floor height: 1400 - 1450 mm Max. height with tilted body: 9720 - 9770 mm Technical gross weight: 42000 kg Axle load: 8000 kg Technical axle load: 9000 kg Fifth wheel load: 12000 kg Technical fifth wheel load: 15000 kg Loading volume: 47.6 cbm Unladen weight: 6233 kg The weight is specified with an accuracy of +/-3% Axle spacing: 1310 mm Distance: Kingpin–2nd axle: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck, longitudinal beams with recessed fifth wheel area Welded construction, weight-optimised from high-strength S700 steel Side underrun protection made from aluminium profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm coupling height unladen Rigid axles 3rd lift axle 1st lift axle SAF disc axles 3x 9000 kg 22.5” INTRADISC CD 2-speed landing gears with full load (BPW Gen2 FL/SAF Hercules) Full PVC mudguards, 6 pcs Rubber splash guards with Wielton logo behind the third axle 6x steel rims 22.5-11.75 ET=120 Wheel nut protection caps Tyres 6x tyres 385/65/22.5 standard (Bridgestone/Hankook) Other chassis equipment Toolbox 44 L (mounted at front left of chassis) Water tank 30 L (mounted centrally left on the chassis) Holder for dust bag on chassis, 1 pc Dust bag, 2 pcs Shovel and broom on chassis, above mudguard Extendable rear ladder Interior height: 2100 mm Double-wing aluminium combo door, aluminium (1/2 ?) vertical with portal beam Side walls SL internal thickness 2.5 mm, fully welded Front wall inclined at 20 degrees Pallet width design 7 mm floor 2 grain discharge slides Tensioning locks below, 2 pcs Cross member spacing under the floor: 360 mm Body damping: Polyp Other superstructure features Tension chain between sidewalls Operator station on chassis frame, access at front left (driver’s side) PVC roll tarp 680 g/m² with quick release and aluminium winding tube, (with vertical rear closure with extension triangle front and rear, centre tube welded in the tarp) Brake system/Pneumatics Steel air reservoir Spring-pressure gauge Automatic lowering when tipping Wabco brake system 2S/2M Chassis paint Chassis painted RAL 7021 (black grey) Body paint Body painted RAL 7001 (silver grey) Tarpaulin colour RAL 9006 (white aluminium) Hydraulics HYVA hydraulic cylinder, eye mount on top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights, 2 pcs 2x 7-pin, 1x 15-pin with EBS connector, without connecting cables to tractor unit Partial LED Aspöck-EUROPOINT III lighting 2 LED work lights on landing legs Djdpfx Aewz Auyofzeku Auxiliary systems Tipping angle indicator Control line for lift axle from driver’s cab The system is designed for semi-trailers and trailers and monitors tyre pressure and tyre temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (pressure and temperature) mounted on the rims and a device connected to the EBS. Reflective warning plates Partial contour marking with Wielton logo Partial white contour marking on sides Partial red contour marking at rear Wielton warning stickers Warranty The manufacturer offers a 24-month warranty on the vehicle.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width 10,402 mm Floor length 8,585 mm Overall width 2,550 mm Overall height to upper frame 3,550 - 3,600 mm Overall height to tarpaulin tip 3,710 - 3,760 mm Track width 2,040 mm Distance from kingpin to 2nd axle 6,120 mm Fifth wheel height 1,200 mm Axle spacing 1,310 mm Rear overhang 1,367 mm Ground height 1,400 - 1,450 mm Max. height with tipped body 9,720 - 9,770 mm Technical gross weight 42,000 kg Axle load 8,000 kg Technical axle load 9,000 kg Fifth wheel load 12,000 kg Technical fifth wheel load 15,000 kg Load volume 47.6 cbm Unladen weight 6233 kg The weight is specified with an accuracy of -3%. Wheelbase 1310 Distance: 2nd axle kingpin: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck frame, longitudinal members with recessed fifth wheel plate area Welded construction, weight-optimized from high-strength S700 steel Side impact protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm fifth wheel height unloaded Rigid axles 3rd lifting axle 1st lifting axle SAF disc axles 3x 9000 kg 22.5 INTRADISC CD 2-speed transmission supports, full load (BPW Gen2 FL/SAF) Hercules) 6 solid PVC fenders Rubber mud flaps with Wielton logo behind the third axle Dkjdpfep Ncb Njx Afzeu 6 steel rims 22.5-11.75 ET=120 Wheel nut caps Tires 6 standard 385/65/22.5 tires (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted at the front of the chassis (left side)) 30 L water tank (mounted in the middle of the chassis (left side)) 1 dust bag holder on the chassis 2 dust bags Shovel and broom on the chassis, above the fender Rear extendable ladder Interior height 2100 mm Two-wing aluminum combination door, aluminum (1/2 ?) vertical with portal beam Side walls SL interior thickness 2.5 mm, fully welded Front wall tilted at 20 degrees Pallet width version 7 mm floor 2 grain pushers 2 lower tension locks Floor Cross member spacing below the floor: 360 mm Polyp body damper Other body equipment Tensioning chain between the side walls Operating station on the chassis frame, access in FR on the left (driver's side) 680 g/m² PVC roll-top tarpaulin with quick-release fastener and aluminum winding tube (with vertical rear end with triangle attachments at the front and rear, center tube welded into the tarpaulin) Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco braking system 2S/2M Chassis paint finish Chassis paint finish RAL 7021 (black gray) Body paint Body paint RAL 7001 (silver gray) Tarpaint color RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights (2 pcs.) 2x 7-pin, 1x 15-pin with EBS connection, without connecting cables to the tractor unit Lighting: Partial LED Aspöck EUROPOINT III 2 LED work lights on the support legs Additional systems Tilt angle indicator Control cable for the lift axle from the driver's cab This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and tire temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheel rims and a device connected to the EBS. Reflective warning signs Partial contour markings with Wielton logo Partial contour markings in white on the sides