Sharpening Machine

WEINIG Rondamat 960

Condition: like new (used), Year of construction: 2010, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Pgjdpfoxlk Nqsx Adnjw Specification: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for grinding straight knives and profiling using a template. Grinding straight knives in a knife block. Hand-held grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazon 10 mm Grinding wheel bore: 60 mm Turning circle min./max.: 100 mm / 300 mm Tool width max.: 360 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial: (back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Table travel 0 - 360 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Complete documentation.

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm Pgsdpfx Ajtynpxednjw - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Pgodpfx Adjxgrp Uonow Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: good (used), Weinig Rondamat R960 Pgodpjwzu N Asfx Adnow Year of manufacture: 2002

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Pgjdsh Ellzspfx Adnsw Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: good (used), Year of construction: 1977, Back off carbide saw grinder VOLLMER model NS120 Pgsdpfof Rlgnsx Adnsw

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Height of horizontal: - Conveyor belt width 600mm (extendable) Podpfji Igzfjx Adnogw Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm

Condition: ready for operation (used), Tilt destacking for layer separation Pgodpfxouzht Ts Adnjw Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: good (used), functionality: fully functional, Complete Weinig planing line consisting of: Package intake. Automatic de-stacking of packages. Batten separation. Cross conveyor with reject sorting. Feed to twin band saw. Singling out before the planing machine infeed. Through-feed crosscut saw. Infeed to the planing machine. Weinig 22 B planer with 8 spindles. Electronic feed with frequency converter up to 80 m/min. In 2023, the planer was equipped with a new frequency-controlled feed, new table, and new wear plates. Outfeed from the planer. Weinig stacking system with batten magazine. Also Almab stacking system. The planing line is fully mechanized. Podpfx Adjwvqvbsnjgw Specifications: Wood length from 2 to 6.10 m. Wood thickness from 10 to 120 mm. Wood width from 40 to 220 mm. Package size input: 1.20 x 1.30 m. Output: 1.20 x 1.20 m (W x H). Well-maintained system. Regular servicing.

Year of construction: 2023, condition: refurbished (used), SFV/800 Shrink Film Wrapping Machine Overhauled 2023 Pgsdjin Nnkspfx Adnjw Workpiece length min. 1000 mm Maximum workpiece length 6300 mm width maximum 290 mm Height maximum 180 mm Speed 15-60 m/min at maximum film thickness 40 μ Film width maximum 970 mm The position of the film from above Film thickness from 25 μ Heating elements - radiators Power 15-24 kW Weight 1900 kg Length of the shrink tunnel 3500 mm Electrical control - Siemens CPU S7-1500