Moulder

Weinig Aufsteckvorschubgetriebe Weinig Aufsteckvorschubgetriebe Unimat P

Condition: used, Year of construction: 2010, functionality: fully functional, BOTTERO CUTTING LINE BOTTERO 545 VSXE-46 - Year 2010 Max dimensions: 4600 x 3210 mm Min dimensions: 150 x 125 mm Thickness: - Monolithic: 3-8 mm - Laminated (2 + 2) – (8 + 8) + BOTTERO 101 BLC-J – Year 2010 Jumbo Loading table Tilting function Ledpfx Abey E I A Rezeag

Condition: good (used), The Bystronic glass cutting line for split band dimensions (Maximum 3300 x 2550 mm) Service/spare parts are provided by Hegla, who purchased Bystronic. 1 Bystronic KTR tilting table, Serial No. E9801016-1, o Tilts with built-in hydraulics, roller drive for automatic glass transport to the cutting table • 1 fully automatic float glass cutting table o Type: XYT 972, Serial No. E980016-2 o Can also be used for shaping, waste optimization, and PC Terra o Maximum dimensions 3300 x 2550 mm o Glass thicknesses 2-15 mm o With belt conveyor Ledpfxot Et Ics Abzeag • 1 breaking table with breaker bars and air cushions o Serial No. E980016-4

Condition: excellent (used), Year of construction: 1998, I sell the window production set: 1pc. tenoning profiling centre Weinig Unitec 10 1pc. profiling automat centre Weinig Univar 10 Year 1998. Moulding heads OERTLI. Available immediately. Total price 17.000 euro. Condition very good ! Ljdofzzhyopfx Abzjag

Year of construction: 2012, condition: excellent (used), WEINIG window production line consists of: Ledpfxjh H Iyxo Abzoag Unirex 3000 machining center Univar 15 Unitex 15

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control panel was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Lajdpfexpi Dusx Abzsg 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: ready for operation (used), Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 40/50 mm Weinig Unicontrol 6 ----- Machine will be checked in our factory before delivery! Technical Data Summary (Please inquire about any additional accessories included) Item 1: Cut-off saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide light for identifying the saw cut CNC-controlled length stop ----- > Length: 3,600 mm > Electronic length stop including positioned cut-off saw Item 2: Tenoning spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (Stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 3000 rpm > Maximum tool swing diameter: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 360 mm > Motor power: 11 kW Item 3: 1. Profiling spindle (co-rotation and conventional) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 7.5 kW Item 4: 2. Profiling spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Pneumatic vertical spindle stroke: 240 mm for wood thicknesses 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Maximum tool swing diameter: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, Lajdpfextvgksx Abzeg for the production of narrow, short parts (e.g., glass-dividing muntins) Munch guide consisting of: Munch support strip from above in the area of ??the vertical right-han d profile milling unit and profiling spindle. Item 5: Horizontal top profile milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Spindle speed: 5,850 rpm > Maximum tool swing diameter: 130 mm > Axial travel: 52 mm, indexed in 2 positions > Radial travel: 125 mm, indexed in 2 positions Item 6: 3rd profiling spindle (fitting spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial travel: 90 mm, indexed in 3 positions > Radial travel: 100 mm, indexed in 2 positions > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Maximum tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Electric feed height adjustment including mechanical digital display and manual feed bar clamping > Rebating device for tear-out-free rebating > Double part package > Return conveyor for 1-person operation: swivel conveyor > Screen control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction nozzle diameter: ----- Crosscut saw 80 mm Tenoning spindle 140 mm Profile spindle 1 140 mm Profile spindle 2 140 mm Grooving device from above 80 mm Hardware spindle 120 mm -----...

Condition: used, For Split Strip Measurements • Automatic cutting table for float glass. • Shape cuts X, Y, C. Shape cutting possible • Waste optimization on the cutting table Laodpfeyrpumox Abzsg • 4 pneumatically operated tilting arms for glass loading • Year of manufacture: 2017 • Model: PUMA SL • Serial number: 2318 • Dimensions: L 4150 mm, with bridge 4500 mm, W 3500 mm • Price on request

Condition: excellent (used), For sale: Genini brand lathe in very good condition Laedpfxexf Nyuo Abzsg

Condition: good (used), Production line consisting of: Ljdpfxot Txfps Abzeag - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine - E-LAB programming system, automatic trajectories manager Main functions: - Mortising Lsdpfx Aboxw Ty Nozsag - Drilling - Milling - Cutting - Tenoning