Twin screw extruder

Weber DS 7.22

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Ffodpexu U Trjfx Afnjt Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: new, Year of construction: 2025, This model SGR-1250 is characterized by removed upper and lower segments and also the bending beam is divided into segments. In addition, a foot lever is installed to open the upper bending beam. - Segments of an upper and lower clamping arm expand the application possibilities, Ffodpsc Swkhofx Afnst - Blocking with the help of a pedal, the hands are free and you can freely position a sheet, - bending bench for universal use in repair and bodywork workshops, - compactly built, modernly shaped, - manual bench for standard tasks, - Segments of an upper span increase the flexibility, Technical specifications: - Max. Working width; 1250mm - bending angle max. 160 degrees - Max. Sheet metal thickness (steel) 1.5mm - Weight 255 kg - segment jaws width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles -Gradscala Price: 5400 euros Wheels inkl. We are looking forward to your contact!

Year of construction: 2005, condition: refurbished (used), functionality: fully functional, Twin parallel screw extruder - Manufacturer: WEBER - Type: DS 8.5 - Year: 2005 - Double parallel screws ø85mm 17D - 5 heating zones on the cylinder + 2 cooling zones - 5 tool heating zones - Engine power: 56kW Fodpsuziyhsfx Afnsft - Up to 150kg/h profile - 230kg/h tubes Very good condition

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is in machine storage at Plastima Used Machinery. The machine is from 1999. Special note: the extruder lacks the gearbox. – Brand: Cincinnati – Model: Titan 45R-APC – Construction year: 1998 – Conical double screw extruder – Screw Ø: 45 mm Ffodpfxoq Tr T Rj Afnot – Working hours: 64.082

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, Fodpogzzwnsfx Afneft -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH Fjdpfx Aoqpft Ijfnoft - Model: WEBER DS 6.5 - Year of construction: 1991 - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line Application: Pharma dental sticks Year: 2023, never used, still in original packaging Ffedpfx Asxr Hgxofnst

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Ffodpjxlcfkofx Afnot Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.