Special bulk bin tipper GKE

voran GKE1250

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Bjdpjdt Rgvofx Amrodh VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Year of construction: 2020, condition: new, 1000l/h Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Bdjdscx Smbjpfx Amreh Max. Pressure : 6 bar incl . electronic control incl . booster pump

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Bjdpfov Srgusx Amrsdh Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. Bodpfeiidm Nex Amredh - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Bdedpfx Ajvtzzkjmroh Made of stainless steel Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: not inspected (used), Various chillers and condensers/liquefiers from bottling plant, dismantled, for sale, among others: 10 cooling plants, make Hafner + Muschler, complete on frames, each with 2 compressors, incl. electrical- and control cabinet, refrigerant R134a, power consumption: 150 kW / 198 kW / 238 kW, years of construction 2002 - 2008, dimensions each approx. 3,100mm x 1,600mm Bedpfx Aeh Nq E Ssmrodh 3 condensers/liquefiers, make Thermofin, each with 4 fans, years of construction 2006/2008/2016, dimensions each: 4,200mm x 2,300mm 4 condensers/liquefiers, make Güntner, each with 8 fans with 890 rpm, 246.7 lt volume, 32 bar, year 2002/2016, dimensions: 6,150mm x 2,300mm 2 condensers/liquefiers, make Güntner, each with 6 fans, 93 lt. content, 28 bar, year 2002, dimensions: 6,050mm x 2,400mm

Year of construction: 2020, operating hours: 1 h, condition: as good as new (ex-display), PTC CJ-1E high-pressure cleaner, similar to but not an Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, or Weidner model. Bjdogcbzcopfx Amrsdh - Operating pressure: 110 bar - Flow rate: 12 l/min - Motor: Electric, 4-pole, 230V, 2.2kW, 1400 rpm - Dimensions: 540 x 440 x 680 mm - Dry weight: approx. 40 kg - High-pressure pump: Comet three-piston pump with ceramic pistons - Robust plastic housing made of injection molding - Practical holder for the spray gun with lance - Self-priming pumps with EASY-START system - Handle with holders for the power cable and the high-pressure hose - Easy maintenance by simply removing the front cover - Large wheels (220 mm diameter) for easy movement on steps and over uneven terrain - Manometer - Built-in professional pressure relief valve - Delayed total stop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainless steel hose reel with 30 m HD hose, 1/4" - 2 pieces of 1/4" male thread pipe cleaning nozzles - Spray gun with washing lance and flat spray nozzle The CJ-1E is a mobile high-pressure cleaning unit, ideal for cleaning and removing blockages in pipes with diameters from 30 to 120 mm. Equipped with a 2.2 kW, 230V electric motor, it can be used in apartments, houses or commercial premises for cleaning sinks and toilets, as well as for gardens and general cleaning. The Comet LW-K pump with Easy-Start and pulsation function guarantees extreme reliability and high cleaning performance. The CJ-1E can be used in both vertical and horizontal positions. The total stop function ensures that the unit is switched off when not in use. The robust plastic housing and large wheels provide extreme strength and optimal maneuverability.

Condition: new, power 2,2 (3,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 735 mm Bjdpfx Amsb I Sx Esrodh width 1 466 mm height 1 290 mm insertion resp. discharge height 850 mm weight 350 kg material 1.4301 / AISI 304 lifting force up to 550 kg / bin rotation time 15 sec fruit discharge height 900 mm fruit discharge width 500 mm suitable for standard bulk bins 1 000 x 1 200 x 970 mm scope of delivery hydraulic power unit

Year of construction: 2008, condition: excellent (used), Screw pump Manufacturer: Busch Type: Cobra DS 600 E Condition: very good Delivery time: available from stock Bjdpfx Aod Rafbemredh

Condition: used, Year of construction: 2000, Gas-fired high-speed steam generator with feed water treatment and dosage module. Additional title: high-speed steam boiler Steam capacity: 120 kg/h Perm. working pressure: 10 bar Capacity: 96 Ltr Set pressure: 20 mbar Length: 1,6 m Width: 0,95 m Height: 2,2 m Bodpfxew Td Ece Amrodh Base construction: mounted on platform Features: feed water treatment and dosage module