CNC ROBOTIC COPING LINE

VOORTMAN V808

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head Lrsdolgvkiepfx Apvjl IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Ledpev U Ea Hjfx Apvorl VACAM CNC Control. Short piece removal.

Year of construction: 2004, condition: excellent (used), REEPACK REEFAST 100 ID.NO. 1866 Trough sealer Reepack mod Reefast 100 years mod 2004 associated gas mixer. Closes 3x troughs at the same time automatically. Dimensions trough 190 x 140 mm Lredpof Ddbnefx Apvol

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs. Lrsdpfjtp Dhpsx Apvsl  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, load capacity: 210 kg, arm reach: 2,696 mm, control cabinet width: 560 mm, control cabinet height: 1,060 mm, type of input current: DC, workpiece weight (max.): 1,111 kg, control cabinet length: 800 mm, throat depth: 2,696 mm, Product description: 24 pieces In stock Industrial KUKA KR 210 R2700 Prime KR C4 Manufacturer: Kuka Year of manufacture: 06:2014 Serial number:635949 Type: KRC4 Load capacity:210 kg Axles: 6 Reach: 2696 mm Repeatability: ± 0.06 mm Scope of delivery - Robot - control cabinet - cable - Teach box Prices are net plus VAT Can be viewed at any time under power. Robot is in very good used condition Delivery time subject to immediate prior sale Upon delivery you will receive an invoice with VAT shown Item condition "New" - partly without original packaging, traces of storage possible, delivery as pictured Item condition "Used" - items show signs of use, these are therefore not described further, Ljdpeqv D Tpofx Apvsrl

Condition: new, Year of construction: 2025, functionality: fully functional, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. Lodpfx Aperq D Nieverl The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Lrsdpfx Aorg Hh Nepvel Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Year of construction: 2007, condition: ready for operation (used), A CNC profile drilling machine Voortman with a movable drilling cabin is available. Working height range: 30mm-1050mm, positioning speed: 40m/min, table width: 300mm, max. working width: 1800mm, support depth: 1500mm, tool stations: 5, max. travel speed: 40m/min, tool holder: SK40, drilling diameter range: 5mm-40mm, thread cutting range: M6-M30, working length: 16200mm. Documentation available. On-site inspection possible. Ledpfxexp Rb Is Apvjrl

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 13-13, The BLOMAX 4 Blowmoulding machine is of the model 13-13. Lodpfjt Akgwsx Apverl The machine has no defects and operates in excellent condition with full functionality. Power : 400V/150A/60000W Year of construction : 2000

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 11383, type of input current: three-phase, working range: 3,000 mm, overall weight: 17,000 kg, input voltage: 400 V, cutting speed: 2,000 mm/min, total width: 4,500 mm, total height: 5,500 mm, total length: 22,400 mm, track width: 1,400 mm, repeat accuracy: 1 mm, workpiece weight (max.): 30,000 kg, warranty duration: 6 months, input frequency: 50 Hz, open-circuit voltage: 400 V, ambient temperature (max.): 45 °C, Secondhand SPC3000 - HGG Profiling Equipment B.V. Lrsderi Slmjpfx Apvol Are you ready to automate your workflow, but not ready for a heavy investment in pipe cutting machinery? We have an interesting opportunity for you. This 2014 SPC3000 (40 Ton) pipe cutting machine is highly versatile. The machine is capable of cutting pipes from 300mm - 3000mm diameter and is equipped with a lot of extra features: - 4x 10 Ton pipe trolleys (300-2500 mm OD) (1 of them is a driven pipe trolley) - 2x 20 Ton pipe support (2500-3000 mm OD) - Plasma marking system Kjellberg Finemarker - Punch marking system - Can handle 18 meter long pipes - Plasma cutting system Kjellberg FF450 - Oxyfuel cutting process - Additional touch screen remote control attached to main drive - 3 Point fume exhaust system The SPC3000 is used by our eXperience Center and maintained by our best engineers at our headquarters in The Netherlands. The machine has a proven record and is used to profile pipes for clients in several high demanding industries f.i offshore, piping, structural steel and the vessel industry. A lot of special projects have been profiled on this machine.