Gantry crane system

Vetter Krantechnik P 400

Condition: used, Year of construction: 2019, Year: 2017 Control type: CC300 Number of hours: 20,000H Storage location: MECA PLASTIC Deadline: AVAILABLE Closing force: 160 T Opening stroke: 460 mm Between columns: 520 mm x 520 mm Plate dimensions: 760 mm x 760 mm Minimum/maximum mold: 250/600 mm Maximum spacing between plates: 1060 mm Screw diameter: 35 mm Screw length: 20T cm3: 154 Bars: 2000 Motor power: 21 kW Heating power: 9.2 kW Closing weight: 8.4 T Length dimensions: 5.90 m Rsdjv I Uw Iopfx Ahvsp Width dimensions: 1.70 m Height dimensions: 2.20 m Cores: NO Robot interface: YES Bi-metal: YES

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen Rjdpfew U N Ixsx Ahvjp - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: new, Vertical band saw machine Make: METALLKRAFT Model: VMBS 1610 Article no. 3951610 Condition: New machine cutting speed 20 - 1000 m/min Accessories: Redpfjhy Tcqsx Ahvsp - Belt welding machine with shear and grinding motor - machine light - 2-speed gearbox infinitely variable - chip blowing device - rip fence - instruction manual

Year of construction: 2015, condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Press bonding framework of internal and external doors " Companies Lignum-Evert Johanson --- pneumatic-hydraulic press Redpfx Ascczuqshvjp bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded hardware give one year warranty

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, roll diameter 400 mm throat 420 mm workpiece height ca. 220 mm table-size 600 x 600 mm cutting speed 12 - 375 m/min Rodpfx Ahew U Ehuovjp saw band length 3160 - 3260 mm saw band width min./max. 3 - 12 mm total power requirement 3,6 kW weight of the machine ca. 0,55 t dimensions of the machine ca. 0,6 x 1,0 m Overhaul year of construction 2023 400 V, 50 Hz, with CEE plug and cable Color: white/grey Accessories: * New castors * Emergency stop * Both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed On request, an LED light and a belt welding device can be installed for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Accessories: * Machine overhauled in 2023 * New castors * Emergency stop * both doors electrically locked * Swivel table * Circuit diagram has been redrawn * Electrical acceptance certificate is enclosed An LED light can be installed on request for an additional charge Operating instructions, circuit diagram immediately available under chip ready for demonstration ! Operating instructions, circuit diagram immediately available under chip ready for demonstration !

Condition: new, In stock Projection: 610 mm Rsdpfx Ahoilk Nyovep installation height: 340 mm working height: 1015 mm table size: 600 x 500 mm table size additional table: 220 x 500 mm saw band length: 3970 mm cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min saw band width: 3 - 16 mm table inclinable, 4 directions: 15 Power main motor: 1,5 kW connected load band welder: 2,4 kVA weight, approx.: 700 kg Equipment: - Stepless cutting speed - Band welding device - Saw band in adjustable precision guides - All-round inclinable working table (not applicable for machines with table feed) - Band shear - Grinding unit - Chip brush - Eyebolt for moving the machine - Machine light . LED speed indicator - Blow out device - CE

Year of construction: 2009, condition: excellent (used), machine/vehicle number: WPTres6, Steel Steel construction Bridge crane Gantry crane Crane canopy Crane runway Crane Indoor crane Dimensions approx. 16.5 x 7.6m Payload / lifting capacity 2x 500KG 2x bridge crane with 500KG payload each - track 7.47m Technical data of the system: Crane runway consisting of HEA200 / IPE300 girders free-standing with bracing 80x80mm square tube Total crane height 4.95m, top running rails 4.5m Rsdporxb D Aefx Ahvsp bottom running rails 4.3m, bottom bridge 4.55m, hook height 4m Track width 7.47m, total width 7.6m External dimensions of steel structure (space required) 16.5 x 7.6m Column spacing 5.75 + 5 + 5.75m (lengths of running rails) System is supplied complete: Steel structure made of IPE300 + HEA240 guide rails + power supply 2 bridges each 500Kg payload incl. chain hoists with trolley drive and travel drive (screws for steel construction are missing) The first pictures (example photo) show a similar, identical crane. Crane is disassembled and immediately available Item location is 75053 Gondelsheim Very good condition, see pictures Shipping by freight forwarder or pickup by appointment only

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Rjdpfx Aji Dx Nnjhvsp Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Ströbel ES-SM Rodpfx Aeiidt Sehvop Schlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Kraftbedarf / power requirements 1PS Gewicht / Weight ca. 300Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Redpfjx Ivkzsx Ahvop