Single facer

VEB

Condition: good (used), Containers, storage containers, ceramic containers, stoneware containers, ceramic storage vessels, earthenware containers, acid-resistant stoneware, fermentation crocks, sauerkraut crocks, ceramic barrels, earthenware pots -Manufacturer: VEB Crinitz N/L, Ceramic containers, acid-resistant stoneware -Capacity: 100 liters -Material: KER 515 acid-resistant stoneware ceramic GDR TGL standard 7838 -Opening: Ø 205 mm -Number: 3 containers available -Price: per piece Ndjdpfx Afoz Epb Ne Seb -Dimensions: 490/450/H810 mm -Weight: 84 kg/unit

Condition: new, Year of construction: 2023, Product: CGM e41 Continuous 3-phase power: 41.0 kVA / 32.8 kW Maximum 3-phase power: 45.1 kVA / 36.0 kW Voltage: 230 /400 Volt Frequency: 50Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA approved for stationary operation only Cooling system: Water Fuel: Diesel Cylinder: 4 Displacement: 3319 cm³ Intake: Normal Engine speed: 1500 rpm Consumption at 3/4 load L/h: 8.5 Generator: MECC ALTE Type: brushless AVR control Digital control ComAp AMF Dimensions and weight: Length: 2000 mm Njdsq A U Aiopfx Af Ssdb Width: 850 mm Height: 1275 mm Weight, dry: 880 kg Tank capacity: 200 l Oil pan Cooling water preheating Battery charge retention 3-way valve Sound insulation hood: RAL 5015 sky blue Base frame: Black

Condition: good (used), Year of construction: 1978, Offer 26129 Technical data: - Max. load capacity approx. 250 kg - Drum dimensions approx. W 450 x D 600 mm - Drum capacity approx. 80 l - Drum opening with cover lid - Inside of the drum is rubberized - 2 speeds - Motorized tilting of the drum - Drive 400 V / 2.3 kW - Space requirement approx. W 1000 x H 1800 x D 1600 mm Ndodez Erbfepfx Af Sob - Weight approx. 500 kg

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 380 V, Cylindrical roll grinder, VEB Schleifmaschinenwerk Berlin (WMW), type SI 40×70, manufactured in 1962 (factory number 1383/62). The machine is complete, with the original control panel (ON/OFF/STOP), and is in working condition. It can be inspected and tested on-site before purchase. Technical specifications: Type / construction size: SI 40×70 Factory number / year of manufacture: 1383/62 Total weight: 1.5 t Current circuit: SI 40-8DT Wiring diagram: SI 41-002 Type of current: 3-phase alternating current (3~) Frequency: 50 Hz Operating voltage (input): 380 V Distribution voltage: 220 V Connected power: 2.8 kW Nodpfjznu Trox Af Sodb Slow-blow fuse: 20 A Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin – a German brand known for its robust, industrial-grade cylindrical grinders from that era. Transportation throughout Europe is available upon agreement. We provide a VAT invoice or receipt.

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Ndjdpfeylp Sljx Af Sjb Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1962, functionality: fully functional, overall weight: 1,050 kg, input voltage: 380 V, type of input current: three-phase, For sale: VEB Schleifmaschinenwerk Berlin / WMW SI 40×70 cylindrical grinding machine, manufactured in 1962, serial number 1334/62, Made in Germany. The machine is complete and in working condition. The machine can be inspected and tested on-site before purchase. WMW / VEB Schleifmaschinenwerk Berlin is known for its robust industrial grinding machines designed for heavy-duty workshop and production applications. Technical data: Manufacturer: WMW / VEB Schleifmaschinenwerk Berlin Type: SI 40×70 Serial number: 1334/62 Year of manufacture: 1962 Country of manufacture: Germany Total weight: approx. 1,050 kg Electrical diagram: SI 40-007 Wiring diagram: SI 40-008 Power supply: 3-phase AC Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Condition: Used, operational condition. Inspection and test run are possible before purchase. Transport: Transport can be arranged throughout Poland after prior agreement. Nedpfx Afjznvqls Sjdb Sales document: VAT invoice or receipt available. Contact: Please contact us to arrange inspection, collection, or transport.

Condition: used, turning length 600 mm turning diameter over bed 360 mm turning diameter over slide rest 190 mm bed width 295 mm number of spindle speeds 45 - 2240 U/min. spindle bore 33,0 mm tailstock quill taper MT MK 3 feed Längs 0,02-0,8 mm/U feed Quer 0,0125-0,5 mm/U total power requirement 5,5 kW weight of the machine ca. 1900 kg range L-W-H 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 euros Furnishing: - WNW NILES 3-jaw chuck Ø 200 mm - Multifix steel holder size B with inserts - revolving center points Nsdpjxaamujfx Af Sodb - chuck key - Movable tailstock - Operation manual

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, HOLZ-HER Edgebanding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program selection and tool adjustment via the 18.5" color touchscreen (16:9). Short heating time for the GlueJet (GJ 301 automatic) adhesive system—around 2 to 3 minutes depending on adhesive type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Swapping PUR adhesive and cleaning the system is effortless and takes just a few minutes. Axis adjustment via high-precision, repeatable servomotors. Special configuration for protective film materials, such as high-gloss and super-matt! One of the absolute highlights of this machine is the multifunction package, which excels with businesses processing a wide variety of edges. The DIA tools are multi-stage and can switch between radius and chamfer as needed—from the longitudinal milling unit to corner copying and the profile scraper blade. Ndjdpfsyfgrpex Af Sob The extendable workpiece support and the extended infeed area with air cushion table provide support for large workpieces. A guidance system assists in feeding small workpieces into the machine. Edge thickness (roll material): 0.4 – 3 mm (material dependent) Edge thickness (strip material): 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Workpiece width: min. 65 mm Feed speed: 10 – 25 m/min Glue application with GlueJet in EVA and PUR quality, minimal effort required. Processes all standard edge types, including high-gloss & super-matt, as well as solid wood edges up to 15 mm. Motorized adjustment of the infeed fence Narrow part guidance system Prepared for connection to a RETURN system Motorized pressure bridge with top belt drive Multifunctional units for rapid changeover between radius, flush, and chamfer processing Spraying units, vertical & horizontal and much more. Delivery, installation, and commissioning of the machine can be offered directly by us for an additional charge. The machine is currently located at our delivery warehouse in Gratwein, Austria. In the event of discrepancies between the German version and any foreign-language version, the German version shall prevail. Our terms and conditions can be found on our website at holzher.de/en/terms-and-conditions.

Condition: good (used), Year of construction: 1987, functionality: fully functional, tank capacity: 50,000 l, total height: 10,000 mm, outer diameter: 2,800 mm, overall weight: 10,200 kg, wall thickness: 15 mm, manhole location: side, operating temperature: 60 °C, operating pressure: 12 bar, 3 compressed air tanks are available. !! Price per unit, net !! Capacity: 50,000 liters (50 m³) Diameter: 2.8 m Height: 10.0 m Empty weight: 10,200 kg Wall thickness: 15 mm Operating pressure: 12 bar Test pressure: 16.3 bar Year of manufacture: 1987 Nodpfjz Ahqasx Af Sedb The internal condition is very good, and they could continue to be used as compressed air tanks. Tank documentation is also available. We will handle the dismantling and loading. Transport can be arranged. The stated selling price is net and per unit !!

Condition: good (used), VEB Fritz Heckert FU 250x1000 milling machine Manufacturer: VEB Fritz Heckert Type: FU 250x1000 X-axis: 900 mm Y-axis: 300 mm Z-axis: 380 mm Speed: 28-2800/min Speed: 10-630 mm/min Ndodjtryc Nopfx Af Ssb Dimensions: 1240 x 340 mm Speed: 6 kW, 35 A Load: 1.7 t Dimensions: 1580 x 1420 x 1470 mm

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Ndodpfok Hz Iwox Af Seb Coolant system and chip conveyor

Condition: good (used), Tool and cutter grinder VEB model SW200 Nsdpfx Aoqutcljf Sodb

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Njdpfxoytirne Af Ssdb Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Ndjdpsghrgusfx Af Sjb Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Condition: good (used), Lathe Length: 1750 mm Motor power: 3 kW Ndsdpji Akv Sjfx Af Ssb Voltage: 380 volts Location: available from warehouse 54634 Bitburg - immediately available -