Manual chain hoist with trolley 1000 kg

VEB Kettenlänge 4,8 m

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Dcjdpfx Asf Epznob Ter Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: used, Year of construction: 1976, Serial number: 77706872xxxx Please contact ATS Norway for more information Djdpfxowi R Epo Ab Tocr Please provide reference number upon request: 20316 Specifications: Model year: 1976 Weight: 13,000 kg Tires: See pictures for condition Bucket included Ready for delivery Description:Hanomag 55C wheel loader from 1976.The machine worked when it was parked, but has been standing still for several years, repair cost to be expectedIt har a wheel where air leaks out.Can be delivered at short notice. Total Weight: 13000

Condition: used, Year of construction: 2011, 1 used welding machine Manufacturer: Merkle Type: MobiARC 280 cel Year: 2011 Technical data: Welding inverter Merkle MobiARC 280 cel+ - with accessories Primary winding : Mains voltage: 400 V, mains frequency: 50/60 Hz, power consumption: 8,3/5,5 | 9,7/8,3 kW, power consumption: 12/8 | 14/12 A, maximum current: 21/16 A, cos φ: 0.98, E-hand welding : electrode diameter: 1.5-6.0 mm open circuit voltage: 96 / 90 V Welding voltage: 20.6-31.20 V Welding current: 15-280 A, current at 60 %: 250 / 260 A TIG welding : open circuit voltage: 96 / 90 V, welding voltage: 10-21.2 V, Dodsh Nvfnspfx Ab Tecr welding current: 5-280 A, current at 60 %: 250 / 270 A, : , Insulation class: H, Protection class: IP23, operating modes: E-Hand, TIG (DC), cooling: AF, Overall dimensions: 485x200x435 mm Weight: 17,5 kg

Condition: used, Year of construction: 1974, Please contact ATS Norway for more information Please provide reference number upon request: 20713 Specifications: 1974 model Hourly rate is uncertain Weight: 10,400 kg Tires (see pictures) Chains Okay bucket Width: approx. 2.5 m Maintenance is taken care of by owner Ready for delivery Notes: Djdowq Uygspfx Ab Tscr Bad battery Owner says it works, but probably needs some maintenance. Own weight: 10400 Total Weight: 10400 Width: 250 Model: LM 846

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 495 mm, roller (top) diameter: 515 mm, side roll diameter: 355 mm, roller diameter: 495 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 60 mm, overall weight: 29,200 kg, total length: 5,770 mm, total width: 2,390 mm, total height: 2,760 mm, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Dcedpsv Nhkwjfx Ab Ter

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of the cutting unit (cm)175 * Weight without cab (kg)1700 * Grain tank capacity (hl)6.5 * Type MF30-6 * Serial number 0D7758 * Year of construction 1967 Dcsdpfjvhvf Tex Ab Tjr ----Internal vehicle number 8144----Irrors and prior sale reserved

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Djdpfsh A Sfdsx Ab Tjcr Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Dcjdpfx Aonr Npyeb Tor

Condition: reconditioned (used), Year of construction: 2003, Special complete plant for exceptionally hard and abrasive stone Primary crusher set baxter double effect 50x36 inches. New jaws. Electric motors Revised the whole set in workshop, perfect condition. Vibrating pre-screen feeder. 1400x6000 mm Hopper with capacity for 40 m3 Mounted on bolted metal structure, Gyratory crushers Svedala 16-45 Asteca screen 2500x6000 mm 3 floors Conveyor belts etc. Dcjdpfx Aboim D Uuj Ter

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Dcsdpfx Abeby Np Es Ter Tool holder, square: 1/2" electrical connection: 220 V, 280 W weight: 3,3 kg