Industrial robot

Universal Robots UR6

Condition: excellent (used), Year of construction: 2009, operating hours: 28,742 h, functionality: fully functional, bar passage: 65 mm, FANUC Series 31i-Model A 3 turrets Hedpfeydmbuex Aahsp Parts conveyor Magazine Further details on request

Condition: excellent (used), Year of construction: 2021, operating hours: 7,950 h, functionality: fully functional, Vertical Turning Center / Vertical Lathe Manufacturer: EMAG Model: VL6 (FANUC) Year of Manufacture: 2021 Operating Hours: approx. 7950 Total weight : 10,5T Main spindle 28,5 KW Power at 40/100% ED 41/28,5KW Torque at 40/100% ED 491/340 Nm Full power at spindle speed 800 rpm Max. speed 3100 rpm Slide Unit X, Z HP Turret Drive Unit for Driven Tools (C362) with internal coolant supply to the tool Max. speed: 9600 rpm Full power at 3000 rpm Torque at 100% ED 33/Nm/10,4 kW Torque at 40% ED 44/Nm/13,8 kW Torque at 10% ED 56/Nm/17,6 kW Tool holder unit for driven tools: 12 x BMT65 Component storage and transport system conveyor, O-Type (GO 240") carrier prism system for 10 components Workpiece height : max. 250 mm Workpiece weight: max. 40 kg Set (10 pcs) of carrier prisms for workpiece diameter: 150 - 300 mm Blow-off Device for Workpiece and Clamping Device (Pick-Up) Hjdpowzwu Ijfx Aahop Coolant Supply: 15 bar Coolant pump capacity: approx. 80 l/min at 15 bar Cooling unit (6.5 kW, water - air) Coolant double filter, manually switchable Filtering fineness 100 μm, with electric and mechanical contamination indicator Swarf conveyor, chain type - rear discharge Hinged belt version: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion Mist Extraction: Extraction rate approx. 800 m³/h Rinsing gun Workpiece Measurement with Probe Probe blow-off Tool life monitoring (sister tool management) 3-Color Signal Tower Quick-Jaw changing chuck SMW autoblok KCNS-N400-128 max. = 3500 rpm Set of hard base jaws Set of soft top jaws Software Package Operating Manual / Maintenance Manual

Condition: good (used), Year of construction: 2006, Used lathe by OKUMA - Model: LT 200-M TwinStar - Year of manufacture: 2006 Hsdpfjv S Su Sex Aahsp

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 570 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 300 kg, number of slots in tool magazine: 34, total height: 2,935 mm, total length: 3,600 mm, total width: 3,700 mm, table width: 860 mm, controller model: FANUC, coolant supply: 12 bar, distance table center to spindle nose: 780 mm, spindle motor power: 15 W, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, spindle nose: ISO 40, spindle speed (max.): 10,000 rpm, spindle speed (min.): 80 rpm, table height: 560 mm, table load: 300 kg, tool diameter: 80 mm, tool length: 300 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Vertical machining center with automatic pallet changer "DOOSAN mod. VC500" with CNC Fanuc 21i-MB Hjdpfx Asu T Hg Tjahsp

Year of construction: 1999, condition: like new (used), functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Heder A Hcbspfx Aahjp Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, Year of construction: 2008, max. wheel diameter 700 mm Hedpfx Aaoyv Ipfjhep max. module 10 (18) min. module 1 table diameter 530 mm Table speed max. 350 1/min Distance of shafts 50 - 680 0 workpiece weight 4.000 kg Axial travel 1.000 mm tangential adjustment 300 mm pivoting angle + / - 45 Grad power capacity 32 kW spindle turning speed range 3.500 - 12.000 U/min tool diameter 320 mm total power requirement 80 kW weight of the machine ca. 25,00 t

Condition: good (used), Year of construction: 2013, 4000mm between centres, swing 950mm, swing over cross slide 630mm, 254mm spindle bore, FANUC 32i-Model B, 30Hp, 630rpm spindle speed, automatic 8 station turret, swarf conveyor, tailstock, 4 jaw chuck & rear mounted 4 jaw chuck, interlocked guards, coolant, fixed steady. Hedpsxp Hhdofx Aahep

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step Hsdpfx Aew Dcdyjahep TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Hodpfx Aaexclfzehjp Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Hsdsyn Em Ropfx Aahjp Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!