Shelving for Pallets

unbekannt unbekannt

Condition: used, Year of construction: 1970, functionality: fully functional, Block and tackle, approx. 100 m long, fully functional. Also tower crane with 36 m jib, partially defective controls. Lrjdpfx Asy Hb Eusfask The stated price refers to the block and tackle. Tower crane approx. 5,000 euros.

Condition: used, Thread rolling machine ORT RP30U 2-roll Lrjdpfx Afjt H Ty Usaok 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Condition: used, jaw width: 200 mm Lodpfxjb Nk Sge Afajrk jaw height: 65 mm span width: 260 mm

Condition: good (used), working width: 1040 mm Lodpsdt Dqwofx Afasrk metal sheet thickness: 1,25 mm upper roller-Ø: 56 mm below roller-Ø: 56 mm weight: 190 kg space needed: 1450 x 460 x 1030 mm

Condition: ready for operation (used), Year of construction: 1996, General Data Machine weight 2200 kg Measurements height 1700 mm Measurements depth 1200 mm Dimensions Machine Length 2200 mm Lsdpfx Afjx D Dwfoajrk This 3-axis Star SR 20 R III was manufactured in 1996. It features a max turning diameter of 20 mm, spindle speeds up to 8,000 RPM, and a rapid feed rate of 35 m/min. Ideal for precision turning, it also includes six fixed turning tool stations and five radial driven tool stations. If you are looking to get high-quality turning capabilities, consider the Star SR 20 R III machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, for saw blade Ø up to approx.: 280 mm here cutting height approx.: 70 mm saw blade speed: 2600 rpm drive motor: alternating current 220 V, 1,47 kW Space requirement: 670 x 520 x 800 mm Weight: 31 kg Lredsb Nwgnspfx Afaok

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Lsdpfjc U U Udox Afasrk Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Lrodpfx Afegbfaxsaok Max. Drilling Capacity (mm) Ø40 mm

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm Lrjdeda I Itjpfx Afaek upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: used, edge dimension: 140 x 140 mm length: 2850 mm Lsdpfxo Sy Uzj Afaerk

Condition: used, Year of construction: 2023, load capacity: 4,000 kg, lifting height: 17,550 mm, total length: 7,450 mm, · Max. Tragkraft 4000 kg · höhe 17.55 m · Maximale seitliche Reichweite 13.08 m · Ausbrechkraft mit Schaufel 8391 daN · Kippwinkel 12 ° · Schüttwinkel 114 ° · Wenderadius (über Räder) 3.94 m · Heben 14 s · Senken 14 s · Teleskop ausfahren 19 s Lrjdpfsyacq Djx Afajk · Teleskop Einfahren 15 s · Auskippen 5 s · Motornorm Stage V · Anzahl der Zylinder / Tragfähigkeit der Zylinder: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW) 100 Hp / 75 kW · Max. Drehmoment / Motordrehzahl 410 Nm @ 1600 rpm · Zugkraft: 8391 daN · Getriebetyp: Drehmomentwandler · Anzahl der Gänge (vorwärts / rückwärts): 4 / 4 · Fahrgeschwindigkeit (beladen): 25 km/h · Max. travel speed: 24.90 km/h · Parkbremse: Automatische negative Parkbremse · Festellbremse: Ölbad-Lamellenbremse an Vorder- und Hinterachse · Pumpenart: Zahnradpumpe · Hydraulikfördermenge / Hydraulikdruck: 167 l/min-270 bar · Motoröl: 10 l · Hydrauliköl 135 l · Fassungsvermögen des Kraftstofftanks 140 l · Inhalt DEF Tank 22.60 l · Geräuschpegel im Fahrerstand (LpA) 79 dB · Umgebungsgeräusch (LwA) 106 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Antriebsräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: ROPS - FOPS Stufe 2 Kabine · Steuerungen: JSM

Condition: used, Track width: 980 mm Lrodpfeb Nwdusx Afajk Conveyor length: 1250 mm Space requirement: 1300 x 1150 x approx. 500 mm

Condition: used, used parallel vice for use on a magnetic clamping plate, ground on all sides jaw width: 100 mm Jaw depth: 40 mm Clamping length: 120 mm Lrodpfxs Uvmve Afaek

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes Lrodpjfu Ivzofx Afaek • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: used, jaw width: 160 mm Lrjdjbc E Uvepfx Afaek jaw height: 70 mm span width: 322 mm total height: 140 mm weight: ca. 65 kg