Machine vice centric clamping

unbekannt

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, thread cutting attachment Kjdpfxoxdwrpo Abnjdr -Tapping chuck: Tapping attachment -Recording: MK3 -Bore: Ø 13 mm -Dimensions: Ø 72 x 210 mm -Weight: 2.3 kg

Condition: new, Year of construction: 2023, Container turning device 3000 Kg load capacity with hand and foot remote control Kjdpfxolypuno Abnjdr speed infinitely variable 120 to 1200 mm / min. diameter from 50mm to 3000mm Wheel size diameter 300mm x 50 dimensions per piece approx. 1680 mm x 550mm

Condition: used, Technical details: length: 4000 mm width: 1420 mm height over floor: 805 mm Payload: 10 t max. wheel diameter: 600 mm track width: 1000 mm control voltage: 80 V electric control: Ja mit Hand weight: 3,25 t dimensions L x W x H: 4,0 x 1,42 x 0,81 m Kdedpfx Aezlxbusbner Battery type: Lead-acid Heavy-duty rail transport trolley *

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1500 mm plate height: 450 mm Kjdpfxey Rru Io Abnsdr weight of the machine ca.: 5,9 t transport dimensions LxWxH: 4,0 x 1,5 x 0,45 m 3 units available – price per unit T-slot clamping plate Dimensions: 4000 × 1500 × 450 mm ·6 T-slots ·Heavy-duty design for machine setup, fixture construction and precision machining ·Ideal for milling, drilling and assembly applications *

Condition: used, thickness of jaw 160 mm clamping capacity 24 kN weight of the machine ca. 31 kg mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation Kdsded Ih N Repfx Abnor

Condition: good (used), Three-phase motor, electric motor Kdjdpocwn Haofx Abnjr -Power: 7.5 kW -Speed: 1500 rpm -Shaft: Ø 38 mm -Design: B3 -Protection rating: IP44 -Power type: 220/380 volts -Dimensions: 410/275/H330 mm -Weight: 40 kg

Condition: good (used), Conveyor belt, belt conveyor, conveyor belt, belt conveyor, steep conveyor, steep conveyor -Conveyor belt: Conveyor belt on a mobile base frame, height-adjustable -Speed: 70m/min -Conveyor belt width: 645 mm -Conveyor belt length: 7625 mm, dimensions see photo techn. drawing Kdsdpfolug R Djx Abner -Height: 875 mm, adjustable -Drive: SEW Eurodrive 1.5 kW -Individual components: see photos -Total dimensions: 7930/1070/H1510 mm -Weight: 420 kg

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed Ksdpfx Abjfg U Ttjnjdr - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: good (used), Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box, pressing tool, clamping support, square profile, shim profile, alignment support -Square profile: clamping base, support profile, alignment base -Length: 492 mm Kdsdpfx Ajy Iv Ndobner -Number: 7 clamping pads available -Price: per piece -Dimensions: 492/97/80 mm -Weight: 27 kg/pc.

Condition: good (used), Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, Kodpfjcxuqcsx Abnedr -Adjustment via trapezoidal thread -Adjustment range: 295 - 530 mm -Quantity: 1 piece -Weight: 9 kg

Condition: excellent (used), machine/vehicle number: 721, Jaw width: 135 mm Back height: 39.6 mm Kodpfx Aed Rlinsbnsdr Span: 140 mm Clamping force: 35 kN

Condition: ready for operation (used), Tool turret 5603923WZ SN:1285 with 12 stations for EMAG VSC 200 DUO, manufacturer unknown, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Ksdpfx Aszu Hvxsbnsdr

Condition: ready for operation (used), Transroll spindle L = 680 mm, Ø thread: 25 mm, pitch: 10 mm, Ø shaft: 20 mm, length shaft: 105 mm, Ø ball cage: 43 mm, flange: 45 x 66 mm, used, normal signs of wear, 100% functional, scope of delivery as per photos Kdedozu Hi Espfx Abnjr

Condition: good (used), Machine vise, sturdy vise, drill vise Kdsdpfxofv Apze Abner -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 150 mm -Dimensions: 425/240/H120 mm -Weight: 40 kg

Condition: ready for operation (used), Transroll spindle L = 875 mm from Studer S60 adjustment range: 570 mm, Ø 63 mm, pitch: 5 mm, Ø ball cage: 90 mm, Ø mounting flange: 125 mm, Ø pin: 30/40 mm, Ø pin thread: 40 mm, used, normal signs of wear, 100% functional Kdodpfxozu Hi Sj Abnor